References
- Abbas, A. T., M. K. Gupta, M. S. Soliman, M. Mia, H. Hegab, M. Luqman, and D. Y. Pimenov. 2019. “Sustainability Assessment Associated with Surface Roughness and Power Consumption Characteristics in Nanofluid MQL-assisted Turning of AISI 1045 Steel.” The International Journal of Advanced Manufacturing Technology 105 (1–4): 1311–1327. doi:https://doi.org/10.1007/s00170-019-04325-6.
- Amrita, M., R. R. Srikant, A. V. Sitaramaraju, M. M. S. Prasad, and P. V. Krishna. 2014. “Preparation and Characterization of Properties of Nanographite-based Cutting Fluid for Machining Operations.” Proceedings of the Institution of Mechanical Engineers, Part J:Journal of Engineering Tribology 228 (3): 243–252. doi:https://doi.org/10.1177/2F1350650113502003.
- Behera, B. C., S. Ghosh, and P. V. Rao. 2016. “Application of Nanofluids during Minimum Quantity Lubrication: A Case Study in Turning Process.” Tribology International 101: 234–246. doi:https://doi.org/10.1016/j.triboint.2016.04.019.
- Darshan, C., S. Jain, M. Dogra, M. K. Gupta, M. Mia, and R. Haque. 2019. “Influence of Dry and Solid Lubricant-assisted MQL Cooling Conditions on the Machinability of Inconel 718 Alloy with Textured Tool.” The International Journal of Advanced Manufacturing Technology 105 (5–6): 1835–1849. doi:https://doi.org/10.1007/s00170-019-04221-z.
- Esfe, M. H., A. Karimipour, W. M. Yan, M. Akbari, M. R. Safaei, and M. Dahari. 2015. “Experimental Study on Thermal Conductivity of Ethylene Glycol Based Nanofluids Containing Al2O3 Nanoparticles.” International Journal of Heat and Mass Transfer 88: 728–734. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2015.05.010.
- Gugulothu, S., and P. V. Krishna. 2018. “Testing and Performance Evaluation of Vegetable-Oil–Based Hybrid Nano Cutting Fluids.” Journal of Testing and Evaluation 48 (5). doi:https://doi.org/10.1520/JTE20180106.0090-3973.
- Gupta, M. K., M. Jamil, X. Wang, Q. Song, Z. Liu, M. Mia, H. Hegab, et al. 2019. “Performance Evaluation of Vegetable Oil-Based Nano-Cutting Fluids in Environmentally Friendly Machining of Inconel-800 Alloy.” Materials 12 (17): 2792. doi:https://doi.org/10.3390/ma12172792.
- Hong, S. Y., and M. Broomer. 2000. “Economical and Ecological Cryogenic Machining of AISI 304 Austenitic Stainless Steel.” Clean Products and Processes 2 (3): 157–166. doi:https://doi.org/10.1007/s100980000073.
- Jamil, M., A. M. Khan, H. Hegab, L. Gong, M. Mia, M. K. Gupta, and N. He. 2019. “Effects of Hybrid Al2O3-CNT Nanofluids and Cryogenic Cooling on Machining of Ti–6Al–4V.” The International Journal of Advanced Manufacturing Technology 102 (9–12): 3895–3909. doi:https://doi.org/10.1007/s00170-019-03485-9.
- Kalita, P. A., A. P. Malshe, W. E. Jiang, and A. J. Shih. 2010. “Tribological Study of Nano Lubricant Integrated Soybean Oil for Minimum Quantity Lubrication (MQL) Grinding.” Presented at the 38th Annual North American Manufacturing Research Conference, NMRC38, Kingston, Canada, May25–28 2010, Transactions of NAMRI/SME, 38: 137–144.
- Lawal, S. A., I. A. Choudhury, and Y. Nukman. 2012. “Application of Vegetable Oil-based Metalworking Fluids in Machining Ferrous Metals—a Review.” International Journal of MachineTools and Manufacture 52 (1): 1–12. doi:https://doi.org/10.1016/j.ijmachtools.2011.09.003.
- Li, Y., S. Tung, E. Schneider, and S. Xi. 2009. “A Review on Development of Nanofluid Preparation and Characterization.” Powder Technology 196 (2): 89–101. doi:https://doi.org/10.1016/j.powtec.2009.07.025.
- Padmini, R., P. V. Krishna, and G. K. M. Rao. 2015. “Performance Assessment of Micro and Nano Solid Lubricant Suspensions in Vegetable Oils during Machining.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 229 (12): 2196–2204. doi:https://doi.org/10.1177/2F0954405414548465.
- Padmini, R., P. V. Krishna, and G. K. M. Rao. 2016. “Effectiveness of Vegetable Oil Based Nanofluids as Potential Cutting Fluids in Turning AISI 1040 Steel.” Tribology International 94: 490–501. doi:https://doi.org/10.1016/j.triboint.2015.10.006.
- Paturi, U. M. R., Y. R. Maddu, R. R. Maruri, and S. K. R. Narala. 2016. “Measurement and Analysis of Surface Roughness in WS2 Solid Lubricant Assisted Minimum Quantity Lubrication (MQL) Turning of Inconel 718.” Procedia CIRP 40: 138–143. doi:https://doi.org/10.1016/j.procir.2016.01.082.
- Rapeti, P., V. K. Pasam, K. M. R. Gurram, and R. S. Revuru. 2018. “Performance Evaluation of Vegetable Oil Based Nano Cutting Fluids in Machining Using Grey Relational analysis-A Step Towards Sustainable Manufacturing.” Journal of Cleaner Production 172: 2862–2875. doi:https://doi.org/10.1016/j.jclepro.2017.11.127.
- Sharma, A. K., J. K. Katiyar, S. Bhaumik, and S. Roy. 2018. “Influence of alumina/MWCNT Hybrid Nanoparticle Additives on Tribological Properties of Lubricants in Turning Operations.” Friction 1–16. doi:https://doi.org/10.1007/s40544-018-0199-5.
- Shashidhara, Y. M., and S. R. Jayaram. 2010. “Vegetable Oils as a Potential Cutting Fluid—an Evolution.” Tribology International 43 (5–6): 1073–1081. doi:https://doi.org/10.1016/j.triboint.2009.12.065.
- Shen, B., A. J. Shih, and S. C. Tung. 2008. “Application of Nanofluids in Minimum Quantity Lubrication Grinding.” Tribology Transactions 51 (6): 730–737. doi:https://doi.org/10.1080/10402000802071277.
- Singh, R., J. S. Dureja, M. Dogra, M. K. Gupta, and M. Mia. 2019. “Influence of Graphene-enriched Nanofluids and Textured Tool on Machining Behavior of Ti-6Al-4V Alloy.” The International Journal of Advanced Manufacturing Technology 105 (1–4): 1685–1697. doi:https://doi.org/10.1007/s00170-019-04377-8.
- Singh, R. K., A. K. Sharma, A. R. Dixit, A. K. Tiwari, A. Pramanik, and A. Mandal. 2017. “Performance Evaluation of Alumina-graphene Hybrid Nano-cutting Fluid in Hard Turning.” Journal of Cleaner Production 162: 830–845. doi:https://doi.org/10.1016/j.jclepro.2017.06.104.
- Srikant, R. R., and V. S. N. V. Ramana. 2015. “Performance Evaluation of Vegetable Emulsifier Based Green Cutting Fluid in Turning of American Iron and Steel Institute (AISI) 1040 Steel–an Initiative Towards Sustainable Manufacturing.” Journal of Cleaner Production 108: 104–109. doi:https://doi.org/10.1016/j.jclepro.2015.07.031.
- Sterle, L., M. Kalin, and F. Pušavec. 2018. “Performance Evaluation of Solid Lubricants under Machining-like Conditions.” Procedia CIRP 77: 401–404. doi:https://doi.org/10.1016/j.procir.2018.08.299.
- Zareie, A., and M. Akbari. 2017. “Hybrid Nanoparticles Effects on Rheological Behavior of water-EG Coolant under Different Temperatures: An Experimental Study.” Journal of Molecular Liquids 230: 408–414. doi:https://doi.org/10.1016/j.molliq.2017.01.043.
- Zhang, X., C. Li, Y. Zhang, D. Jia, B. Li, Y. Wang, M. Yang, Y. Hou, and X. Zhang. 2016. “Performances of Al2O3/SiC Hybrid Nanofluids in Minimum-quantity Lubrication Grinding.” The International Journal of Advanced Manufacturing Technology 86 (9–12): 3427–3441. doi:https://doi.org/10.1007/s00170-016-8453-3.
- Zhang, Y., C. Li, D. Jia, D. Zhang, and X. Zhang. 2015a. “Experimental Evaluation of MoS2 Nanoparticles in Jet MQL Grinding with Different Types of Vegetable Oil as Base Oil.” Journal of Cleaner Production 87: 930–940. doi:https://doi.org/10.1016/j.jclepro.2014.10.027.
- Zhang, Y., C. Li, D. Jia, D. Zhang, and X. Zhang. 2015b. “Experimental Evaluation of the Lubrication Performance of MoS2/CNT Nanofluid for Minimal Quantity Lubrication in Ni-based Alloy Grinding.” International Journal of Machine Tools & Manufacture 99: 19–33. doi:https://doi.org/10.1016/j.ijmachtools.2015.09.003.