High speed machining and optimisation of Al/SiC/Gr hybrid metal matrix composites using ANOVA and grey relational analysis

References

• A K, S., and S. Pradhan. 2013. “Modeling and Optimization of Al/SiCp MMC Machining Using Taguchi Approach.” Measurement 46: 3064–3072. doi:https://doi.org/10.1016/j.measurement.2013.06.001.
   Google Scholar
• Ambigai, R., and S. Prabhu. 2017. “.experimental and ANOVA Analysis on Tribological Behavior of Al/B4C Micro and Nanocomposite.” Australian Journal of Mechanical Engineering 17 (2): 53–63. doi:https://doi.org/10.1080/14484846.2017.1299663.
   Google Scholar
• ASM Handbook. 2004. Metallography and Microstructure. Vol. 9. Ohio: ASM International.
   Google Scholar
• Basavarajappa, S., and P. Davim. 2013. “Influence of Graphite Particles on Surface Roughness and Chip Formation Studies in Turning Metal Matrix Composites.” Materials Research 16 (5): 990–996. doi:https://doi.org/10.1590/S1516-14392013005000098.
   Google Scholar
• Boothroyd, G., and Knight. W A. 2011. Fundamentals of Machining and Machine Tools. New York: CRC Press Taylor & Francis.
   Google Scholar
• Das, D., M. P C, S. Singh, A. K. Chaubey, and R. B C. 2018. “Machining Performance of Aluminium Matrix Composite and Use of WPCA Based Taguchi Technique for Multiple Response Optimization.” International Journal of Industrial Engineering Computations 9 (4): 551–564. doi:https://doi.org/10.5267/j.ijiec.2017.10.001.
   Google Scholar
• Harmesh, K., M. Alakesh, and K. Rajesh. 2018. “Modeling and Desirability Approach-based Multi-response Optimization of WEDM Parameters in Machining of Aluminum Metal Matrix Composite.” Journal of the Society of Mechanical Science & Engineering 40: 458–477.
   Web of Science ®Google Scholar
• Hull, D., and T. W. Clyne. 2014. An Introduction to Composite Materials. New York: Cambridge University Press.
   Google Scholar
• Jayakumar, T., and K. Annamalai. 2018. “Investigation of Hot Tensile Behavior of Silicon Carbide and Magnesium Oxide Reinforced Aluminum Matrix Composites.” Silicon 11: 935–945. doi:https://doi.org/10.1007/s12633-018-9965-2.
   Google Scholar
• Jing, X., L. Huaizhong, J. Wang, Y. Yuan, D. Zhang, N. Kwok, and T. Nguyen. 2016. “.an Investigation of Surface Roughness in Microend- Milling of Metals.” Australian Journal of Mechanical Engineering 15 (3): 166–174. doi:https://doi.org/10.1080/14484846.2016.1211472.
   Google Scholar
• Montgomery, D. C. 2014. Design and Analysis of Experiments. 8th ed. United Kingdom: Wiley.
   Google Scholar
• Muthukrishnan, N., and P. J. Davim. 2009. “Optimization of Machining Parameters of Al/SiC-MMC with ANOVA and ANN Analysis.” Journal of Materials Processing Technology 209: 225–232. doi:https://doi.org/10.1016/j.jmatprotec.2008.01.041.
   Web of Science ®Google Scholar
• Nicolae-valentin, I., G. Cristina, and O. George. 2018. “A New Method for Establishing the Depths of Cut for Cast Iron Parts Turning.” Journal of the Society of Mechanical Science & Engineering 40: 496–509.
   Web of Science ®Google Scholar
• Nipanikar, S., V. Sargade, and R. Guttedar. 2018. “Optimization of Process Parameters through GRA, TOPSIS and RSA Models.” International Journal of Industrial Engineering Computations 9 (1): 137–154. doi:https://doi.org/10.5267/j.ijiec.2017.3.007.
   Google Scholar
• Oliver Neasraj, S., and S. Prabhu. 2016. “.modeling and Analysis of Titanium Alloy in Wirecut EDM Using Grey Relation Coupled with Principle Component Analysis.” Australian Journal of Mechanical Engineering 15 (3): 198–209. doi:https://doi.org/10.1080/14484846.2016.1251077.
   Google Scholar
• Premanth, A. 2019. “Optimization of the Process Parameters on the Mechanical and Wear Properties of Al-SiC Nano-composites Fabricated by Friction Stir Processing Using Desirability Approach.” Silicon 11: 1–11.
   Google Scholar
• Ren, J., Z. Zhai, S. Kaining, Z. Jinhua, Y. Jixing, and C. Ju. 2018. “Tool Determination and Geometry Parameter Optimization of Carbide Tool in High-speed Milling of Third Generation Ɣ-tial Alloy.” Journal of the Society of Mechanical Science & Engineering 40: 491–504.
   Web of Science ®Google Scholar
• Shunmugavel, M., M. Goldberg, A. Polishetty, J. Nomani, S. Sun, and G. Littlefair. 2017. “.chip Formation Characteristics of Selective Laser Melted Ti–6Al–4V.” Australian Journal of Mechanical Engineering 17 (2): 109–126. doi:https://doi.org/10.1080/14484846.2017.1364833.
   Google Scholar
• Sivaiah, P., and D. Chakradhar. 2017. “Comparative Evaluations of Machining Performance during Turning of 17-4 PH Stainless Steel under Cryogenic and Wet Machining Conditions.” Machining Science and Technology 22 (1): 147–162. doi:https://doi.org/10.1080/10910344.2017.1337129.
   Web of Science ®Google Scholar
• Suhasini, G., R. Mamidala, and P. William. 2013. “Machining of MMCs: A Review.” Machining Science and Technology 17 (1): 41–73. doi:https://doi.org/10.1080/10910344.2012.747897.
   Google Scholar
• Suresh, P., K. Marimuthu, S. Ranganathan, and T. Rajmohan. 2014. “Optimization of Machining Parameters in Turning of Al-Sic-Gr Hybrid Metal Matrix Composites Using Grey-fuzzy Algorithm.” Transactions of Nonferrous Metals Society of China 24 (9): 2805–2814. doi:https://doi.org/10.1016/S1003-6326(14)63412-9.
   Web of Science ®Google Scholar
• Tamer, O., K. Erol, and O. Cakur. 2008. “Investigation of Mechanical and Machinability Properties of SiC Particle Reinforced Al-MMC.” Journal of Materials Processing Technology 198: 220–225. doi:https://doi.org/10.1016/j.jmatprotec.2007.06.082.
   Google Scholar
• Vijayabhaskar, S., and T. Rajmohan. 2018. “Experimental Investigation and Optimization of Machining Parameters in WEDM of Nano-SiC Particles Reinforced Magnesium Matrix Composites.” Silicon 11: 2987–2999.
   Web of Science ®Google Scholar
• Vinod, B., S. Ramanathan, V. Ananthi, and N. Selvakumar. 2018. “Fabrication and Characterization of Organic and In-organic Reinforced A356 Aluminium Matrix Hybrid Composite by Improved Double-stircasting.” Silicon 11: 817–829. doi:https://doi.org/10.1007/s12633-018-9881-5.
   Google Scholar
• Yahya, A., A. Mustafa, and A. Serdar. 2012. “Drilling of a Hybrid Al/SiC/Gr Metal Matrix Composites.” International Journal of Advanced Manufacturing Technology 60: 513–517. doi:https://doi.org/10.1007/s00170-011-3644-4.
   Google Scholar