Reliability analysis of the cutting tool in plasma-assisted turning and prediction of machining characteristics

References

• Aramesh, M., M. H. Attia, H. A. Kishawy, and M. Balazinski. 2016. “Estimating the Remaining Useful Tool Life of Worn Tools under Different Cutting Parameters: A Survival Life Analysis during Turning of Titanium Metal Matrix Composites (Ti-mmcs).” CIRP Journal of Manufacturing Science and Technology 12: 35–43. doi:10.1016/j.cirpj.2015.10.001.
   Web of Science ®Google Scholar
• Babu, T., and R. A. Gopala.2014. “Modeling and Multi-response Optimization of Machining Performance while Turning Hardened Steel with Self-propelled Rotary Tool.”
   Google Scholar
• Bermingham, M. J., S. Palanisamy, and M. S. Dargusch. 2012. “Understanding the Tool Wear Mechanism during Thermally Assisted Machining Ti-6Al-4V.” International Journal of Machine Tools and Manufacture 62: 76–87. doi:10.1016/j.ijmachtools.2012.07.001.
   Web of Science ®Google Scholar
• Boing, D., F. L. Castro, and R. B. Schroeter. 2020. “Prediction of PCBN Tool Life in Hard Turning Process Based on the Three-dimensional Tool Wear Parameter.” The International Journal, Advanced Manufacturing Technology 106 (1–2): 779–790. doi:10.1007/s00170-019-04509-0.
   Web of Science ®Google Scholar
• Bouacha, K., M. A. Yallese, T. Mabrouki, and J. F. Rigal. 2010. “Statistical Analysis of Surface Roughness and Cutting Forces Using Response Surface Methodology in Hard Turning of AISI 52100 Bearing Steel with CBN Tool.” International Journal of Refractory Metals and Hard Materials 28 (3): 349–361. doi:10.1016/j.ijrmhm.2009.11.011.
   Web of Science ®Google Scholar
• Chang, W. Y., S. J. Wu, and J. W. Hsu. 2020. “Investigated Iterative Convergences of Neural Network for Prediction Turning Tool Wear.” The International Journal of Advanced Manufacturing Technology 106 (7–8): 2939–2948. doi:10.1007/s00170-019-04821-9.
   Web of Science ®Google Scholar
• Davami, M. Z. M. 2008. “Investigation of Tool Temperature and Surface Quality in Hot Machining of Hard-to-Cut Materials.” World Academy of Science, Engineering and Technology 2 (10): 672–676.
   Google Scholar
• Ding, F., and Z. He. 2011. “Cutting Tool Wear Monitoring for Reliability Analysis Using Proportional Hazards Model.” The International Journal of Advanced Manufacturing Technology 57 (5–8): 565–574. doi:10.1007/s00170-011-3316-4.
   Web of Science ®Google Scholar
• Douglas, C. 2001. Montgomery - Design and Analysis of Experiments. Part 1. John Wiley & Sons, Inc., New York.
   Google Scholar
• Dumitrescu, P., P. Ã. Koshy, J. Stenekes, and M. A. Elbestawi. 2016. “High-power Diode Laser Assisted Hard Turning of AISI D2 Tool Steel.” International Journal of Machine Tools and Manufacture. 46 (2006): 2009–2016.
   Google Scholar
• Dwivedi, S. P., S. Sharma, and R. K. Mishra. 2014. “Effects of Roller Burnishing Process Parameters on Surface Roughness of A356/5%SiC Composite Using Response Surface Methodology.” Advances in Manufacturing 2 (4): 303–317. doi:10.1007/s40436-014-0083-0.
   Web of Science ®Google Scholar
• Elbestawi, M. A. 1997. “Advanced Manufacturing Technology.” 1–16.
   Google Scholar
• Gokulachandran, J., and R. Padmanaban. 2018. “Prediction of Remaining Useful Life of Cutting Tools: A Comparative Study Using Soft Computing Methods.” International Journal of Process Management and Benchmarking 8 (2): 156–181. doi:10.1504/IJPMB.2018.090795.
   Google Scholar
• Hitomi, K., N. Nakamura, and S. Inoue. 1978. “Reliability Analysis of Cutting Tools.” ASME Paper 101 (78–WA/PROD–9): 185–190.
   Google Scholar
• Khanna, N., F. Pusavec, C. Agrawal, and G. M. Krolczyk. 2020. “Measurement and Evaluation of Hole Attributes for Drilling CFRP Composites Using an Indigenously Developed Cryogenic Machining Facility.” Measurement Journal of the International Measurement Confederation 154: 107504. doi:10.1016/j.measurement.2020.107504.
   Web of Science ®Google Scholar
• Kolthoff, I. M. 2016. “V10 Of Design-Expert ® Software: Top Tool For Design Of Experiments (Doe) Rave Reviews From The Expert Evaluators What ’ s in it for You What ’ s New.” 1–6.
   Google Scholar
• Kosaraju, S., and V. G. Anne. 2013. “Optimal Machining Conditions for Turning Ti-6Al-4V Using Response Surface Methodology.” Advances in Manufacturing 1 (4): 329–339. doi:10.1007/s40436-013-0047-9.
   Web of Science ®Google Scholar
• Kumar, A., R. B. Chinnam, and F. Tseng. 2019. “An HMM and Polynomial Regression Based Approach for Remaining Useful Life and Health State Estimation of Cutting Tools.” Computers & Industrial Engineering 128: 1008–1014. doi:10.1016/j.cie.2018.05.017.
   Web of Science ®Google Scholar
• Kumar, A., V. Kumar, and J. Kumar. 2018. “Investigation of Machining Characterization for Wire Wear Ratio & MRR on Pure Titanium in WEDM Process through Response Surface Methodology.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 232 (1): 108–126. doi:10.1177/0954408916685588.
   Web of Science ®Google Scholar
• Kumar, A., and K. Maity. 2018. “Engineering Science and Technology, an International Journal Comparison the Machinability of Inconel 718, Inconel 625 and Monel 400 in Hot Turning Operation.” Engineering Science and Technology, an International Journal. 21(03): 364-370.
   Google Scholar
• Kwon, W. T., J. S. Park, and S. Kang. 2005. “Effect of Group IV Elements on the Cutting Characteristics of Ti(C,N) Cermet Tools and Reliability Analysis.” Journal of Materials Processing Technology 166 (1): 9–14. doi:10.1016/j.jmatprotec.2004.06.009.
   Web of Science ®Google Scholar
• Leshock, C. E., J.-N. Kim, and Y. C. Shin. 2001. “Plasma Enhanced Machining of Inconel 718: Modeling of Workpiece Temperature with Plasma Heating and Experimental Results.” International Journal of Machine Tools and Manufacture 41 (6): 877–897. doi:10.1016/S0890-6955(00)00106-1.
   Web of Science ®Google Scholar
• Liu, E., W. An, Z. Xu, and H. Zhang. 2020. “Experimental Study of Cutting-parameter and Tool Life Reliability Optimization in Inconel 625 Machining Based on Wear Map Approach.” Journal of Manufacturing Processes 53 (January): 34–42. doi:10.1016/j.jmapro.2020.02.006.
   Google Scholar
• López de Lacalle, L. N., J. A. Saánchez, A. Lamikiz, and A. Celaya. 2004. “Plasma Assisted Milling of Heat-Resistant Superalloys.” Journal of Manufacturing Science and Engineering 126 (2): 274. doi:10.1115/1.1644548.
   Web of Science ®Google Scholar
• Lu, Z., D. Zhang, X. Zhang, and Z. Peng. 2020. “Effects of High-pressure Coolant on Cutting Performance of High-speed Ultrasonic Vibration Cutting Titanium Alloy.” Journal of Materials Processing Technology 279 (September): 116584. doi:10.1016/j.jmatprotec.2019.116584.
   Google Scholar
• Madhavulu, G., and B. Ahmed. 1994. “Hot Machining Process for Improved Metal Removal Rates in Turning Operations.” Journal of Materials Processing Technology 44 (3–4): 199–206. doi:10.1016/0924-0136(94)90432-4.
   Web of Science ®Google Scholar
• Nath, A., P. K. Tiwari, A. K. Rai, and S. Sundaram. 2019. “Evaluation of Carbon Capture in Competent Microalgal Consortium for Enhanced Biomass, Lipid, and Carbohydrate Production.” 3 Biotech 9 (11): 1–15. doi:10.1007/s13205-019-1910-6.
   PubMedGoogle Scholar
• Novak, J. W., Y. C. Shin, and F. P. Incropera. 1997. “Assessment of Plasma Enhanced Machining for Improved Machinability of Inconel 718.” Journal of Manufacturing Science and Engineering 119 (1): 125. doi:10.1115/1.2836550.
   Web of Science ®Google Scholar
• Ozler, N. T. Æ. L. 2004. “Optimisation for Hot Turning Operations with Multiple Performance Characteristics.” 777–782.
   Google Scholar
• Parida, A. K., and K. Maity. 2020. “FEM and Experimental Analysis of Thermal Assisted Machining of Titanium Base Alloys.” Measurement Journal of the International Measurement Confederation 152: 107292. doi:10.1016/j.measurement.2019.107292.
   Web of Science ®Google Scholar
• Pfefferkorn, F. E., S. Lei, Y. Jeon, and G. Haddad. 2009. “A Metric for Defining the Energy Efficiency of Thermally Assisted Machining.” International Journal of Machine Tools and Manufacture 49 (5): 357–365. doi:10.1016/j.ijmachtools.2008.12.009.
   Web of Science ®Google Scholar
• Prasad, D. V. S. S. S. V., and A. Gopala Krishna. 2009. “Empirical Modeling and Optimization of Wire Electrical Discharge Machining.” The International Journal of Advanced Manufacturing Technology 43 (9–10): 914–925. doi:10.1007/s00170-008-1769-x.
   Web of Science ®Google Scholar
• Rao, T. B., A. G. Krishna, R. K. Katta, and K. R. Krishna. 2015. “Modeling and Multi-response Optimization of Machining Performance while Turning Hardened Steel with Self-propelled Rotary Tool.” Advances in Manufacturing 3 (1): 84–95. doi:10.1007/s40436-014-0092-z.
   Web of Science ®Google Scholar
• Salonitis, K., and A. Kolios. 2014. “Reliability Assessment of Cutting Tool Life Based on Surrogate Approximation Methods.” The International Journal of Advanced Manufacturing Technology 71 (5–8): 1197–1208. doi:10.1007/s00170-013-5560-2.
   Web of Science ®Google Scholar
• Salonitis, K., and A. Kolios. 2020. “Force-based Reliability Estimation of Remaining Cutting Tool Life in Titanium Milling.” The International Journal, Advanced Manufacturing Technology 106 (7–8): 3321–3333. doi:10.1007/s00170-019-04883-9.
   Web of Science ®Google Scholar
• Savas, V., C. Ozay, and H. Ballikaya. 2016. “Experimental Investigation of Cutting Parameters in Machining of 100Cr6 with Tangential Turn-milling Method.” Advances in Manufacturing 4 (1): 97–104. doi:10.1007/s40436-016-0134-9.
   Web of Science ®Google Scholar
• Vagnorius, Z., M. Rausand, and K. Sørby. 2010. “Determining Optimal Replacement Time for Metal Cutting Tools.” European Journal of Operational Research 206 (2): 407–416. doi:10.1016/j.ejor.2010.03.023.
   Web of Science ®Google Scholar
• Wager, J. G., and M. M. Barash. 1971. “Study of the Distribution of the Life of HSS Tools.” Journal of Engineering for Industry 93 (4): 1044–1050. doi:10.1115/1.3428041.
   Google Scholar