References
- Cavanough, G. L., M. Kochanek, J. B. Cunningham, and I. D. Gipps. 2008. “A Self-Optimizing Control System for Hard Rock Percussive Drilling.” Transactions on Mechatronics 13 (4): 153–157. DOI:10.1109/TMECH.2008.918477.
- Chiang, L. E., and D. A. Elias. 2000. “Modeling Impact in Down-the-hole Rock Drilling.” International Journal of Rock Mechanics Mining Sciences 37 (4): 599–613. doi:10.1016/S1365-1609(99)00124-0.
- HU, J.-P., and Q. HU. 2014. “Oil Pressure Pulse Features of a Hydraulic Impactor with an Overlapped Oil Distributing Valve.” Journal of Vibration and Shock 33 (24): 158–163.
- Oh J, C. Song, and D. J. Kim, 2012. “Modeling and Performance Analysis of Rock Drill Drifters for Rock Stiffness.” International Journal of Precision Engineering and Manufacturing 13 (12): 2187–2193. doi:10.1007/s12541-012-0290-1.
- Kahraman, S., N. Bilgin, and C. Feridunoglu. 2003. “Dominant Rock Properties Affecting the Penetration Rate of Percussive Drills.” International Journal of Rock Mechanics & Mining Science 40 (5): 711–723. doi:10.1016/S1365-1609(03)00063-7.
- Li, Y., Y. Luo, and X. Wu. 2018. “Fault Diagnosis Research on Impact System of Hydraulic Rock Drill Based on Internal Mechanism Testing Method.” Shock and Vibration 2018: 1–9.
- Lundberg, B., and M. Okrouhlik. 2011. “Influence of 3D Effects on the Efficiency of Percussive Rock Drilling.” International Journal of Impact Engineering 25 (4): 345–360. doi:10.1016/S0734-743X(00)00053-1.
- Oh, J., C. Song, D. J. Kim J. G. Kim, J. Y. Park, & J. W. Cho. 2016. “Numerical Investigation of Performance of Hydraulic Percussion Drifter.” International Journal of Precision Engineering and Manufacturing 17 (7): 879–885. doi:10.1007/s12541-016-0107-8.
- Hu, Qiong, C. Yang, H. Zheng, and M. Chen. 2014. “Dynamic Simulation and Test Research of Impact Performance of Hydraulic Rock Drill with No Constant-Pressurized Chamber.” Automation in Construction 37 (1): 211–216. doi:10.1016/j.autcon.2013.08.011.
- Ryu, B. J., H. H. Han, G. S. Lee K.-Y. Ahn, and C.-R. Lee. 2010. “Dynamic Response Analysis of a Cantilevered Beam Due to an Elastic Impact.” International Journal Precision Engineering and Manufacturing 11 (4): 539–547.
- Seo, J., D. K. Noh, G. H. Lee, J. S. Jang 2016. “A Percussion Performance Analysis for Rock-drill Drifter through Simulation Modeling and Experimental Validation.” International Journal of Precision Engineering and Manufacturing 17 (2): 163–170. doi:10.1007/s12541-016-0021-0.
- Tian, W.-Y., M. Hu, C.-X. Zhu, and G. Cai. 2006. “Design on Part of Structural Parameters of Hydraulic Rock Drill.” Journal of Northeastern University(Natural Science) 27 (10): 1134–1137.
- Wei, M., M. Fei, and R. Guo. 2018. “Research on the Prediction Model of Drillinganti-jamming Valve Based on GA-BPNN.” Australian Journal of Mechanical Engineering, no. 5: 1–11.
- Yang, G. P., R. L. Wang, Bo Chen, and J.-H. Gao. 2011. “Modeling and Simulation of Hydraulic Breaker System.” China Journal of High Way and Transport 24 (3): 121–126.
- Yang, S., Y. Ou, Y. Guo, X. M. Wu. 2017. “Analysis and Optimization of the Working Parameters of the Impact Mechanism of Hydraulic Rock Drill Based on a Numerical Simulation.” International Journal of Precision Engineering and Manufacturing 18 (7): 971–977. doi:10.1007/s12541-017-0114-4.