A review on characteristics of cold sprayed coatings

References

• Adebiyi, D. I., A. P. I. Popoola, and I. Botef. 2016. “Low Pressure Cold Spray Coating of Ti-6Al-4V with SiC-based Cermet.” Materials Letters 175: 63–67. doi:10.1016/j.matlet.2016.03.142.
   Web of Science ®Google Scholar
• Ajaja, J., D. Goldbaum, and R. Richard Chromik. 2011. “Characterization of Ti Cold Spray Coatings by Indentation Methods.” Acta Astronautica 69: 923–928. doi:10.1016/j.actaastro.2011.06.012.
   Web of Science ®Google Scholar
• Ajdelsztajn, L., B. Jodoin, G. Kim, and J. M. Schoenung. 2005. “Cold Spray Deposition of Nanocrystalline Aluminum Alloys.” Metallurgical and Materials Transactions A. 36(11): 3263. doi:10.1007/s11661-005-0099-y.
   Google Scholar
• Ajdelsztajn, L., B. Jodoin, and J. Schoenung. 2006. “Synthesis and Mechanical Properties of Nanocrystalline Ni Coatings Produced by Cold Gas Dynamic Spray.” Surface & Coatings Technology 201: 1166–1172. doi:10.1016/j.surfcoat.2006.01.037.
   Web of Science ®Google Scholar
• Ajdelsztajn, L., A. Zúñiga, B. Jodoin, and E. J. Lavernia. 2006. “Cold Gas Dynamic Spraying of a High Temperature Al Alloy.” Surface & Coatings Technology 201(6): 2109–2116. doi:10.1016/j.surfcoat.2005.06.001.
   Web of Science ®Google Scholar
• Alkhimov, A. P., A. N. Papyrin, V. F. Kosarev, N. I. Nesterovich, M. M. Shushpanov, and Anatoly Nikiforovich Papyrin. 1994. “Gas-dynamic Spraying Method for Applying a Coating.” US Patent 5302414.
   Google Scholar
• Arabgol, Z., H. Assadi, T. Schmidt, F. Gärtner, and T. Klassen. 2014. “Analysis of Thermal History and Residual Stress in Cold-sprayed Coatings.” Journal of Thermal Spray Technology 23 (1–2): 84–90. doi:10.1007/s11666-013-9976-x.
   Web of Science ®Google Scholar
• Assadi, H., F. Gärtner, T. Stoltenhoff, and H. Kreye. 2003. “Bonding Mechanism in Cold Gas Spraying.” Acta Materialia 51 (15): 4379–4394. doi:10.1016/S1359-6454(03)00274-X.
   Web of Science ®Google Scholar
• Bae, G., J. Jang, and C. Lee. 2012. “Correlation of Particle Impact Conditions with Bonding, Nanocrystal Formation and Mechanical Properties in Kinetic Sprayed Nickel.” Acta Materialia 60: 3524–3535. doi:10.1016/j.actamat.2012.03.001.
   Web of Science ®Google Scholar
• Bae, G., K. Kang, J. Kim, and C. Lee. 2010. “Nanostructure Formation and Its Effects on the Mechanical Properties of Kinetic Sprayed Titanium Coating.” Materials Science and Engineering A 527: 6313–6319. doi:10.1016/j.msea.2010.06.037.
   Google Scholar
• Bae, G., S. Kumar, S. Yoon, K. Kang, H. Na, H.-J. Kim, and C. Lee. 2009. “Bonding Features and Associated Mechanisms in Kinetic Sprayed Titanium Coatings.” Acta Materialia 57 (19): 5654–5666. doi:10.1016/j.actamat.2009.07.061
   Web of Science ®Google Scholar
• Bae, G., Y. Xiong, S. Kumar, K. Kang, and C. Lee. 2008. “General Aspects of Interface Bonding in Kinetic Sprayed Coatings.” Acta Materialia 56 (17): 4858–4868. doi:10.1016/j.actamat.2008.06.003.
   Web of Science ®Google Scholar
• Bai, Y., Z. H. Wang, X. B. Li, G. S. Huang, C. X. Li, and Y. Li. 2017. “Corrosion Behavior of Low Pressure Cold Sprayed Zn-Ni Composite Coatings.” Journal of Alloys and Compounds 719: 194–202. doi:10.1016/j.jallcom.2017.05.134.
   Web of Science ®Google Scholar
• Bakshi, S. R., V. Singh, K. Balani, D. G. McCartney, S. Seal, and A. Agarwal. 2008. “Carbon Nanotube Reinforced Aluminum Composite Coating via Cold Spraying.” Surface & Coatings Technology 202: 5162–5169. doi:10.1016/j.surfcoat.2008.05.042.
   Web of Science ®Google Scholar
• Barradas, S., R. Molins, M. Jeandin, M. Arrigoni, M. Boustie, C. Bolis, L. Berthe, and M. Ducos. 2005. “Application of Laser Shock Adhesion Testing to the Study of the Interlamellar Strength and Coating–substrate Adhesion in Cold-sprayed Copper Coating of Aluminum.” Surface & Coatings Technology 197: 18–27. doi:10.1016/j.surfcoat.2004.08.222.
   Web of Science ®Google Scholar
• Berger, L. M. 2007. “Hardmetals as Thermal Spray Coatings.” Powder Metallurgy 50: 205–214. doi:10.1179/174329007X246078.
   Web of Science ®Google Scholar
• Birt, A. M., V. K. Champagne, R. D. Sisson, and D. Apelian. 2015. “Microstructural Analysis of Cold-sprayed Ti-6Al-4V at the Micro- and Nano-scale.” Journal of Thermal Spray Technology 24 (7): 1277–1288. doi:10.1007/s11666-015-0288-1.
   Web of Science ®Google Scholar
• Borchers, C., F. Gartner, T. Stoltenhoff, H. Assadi, and H. Kreye. 2003. “Microstructural and Macroscopic Properties of Cold Sprayed Copper Coatings.” Journal of Applied Physics 93 (12): 10064. doi:10.1063/1.1573740.
   Web of Science ®Google Scholar
• Borchers, C., F. Gartner, T. Stoltenhoff, and H. Kreye. 2004. “Microstructural Bonding Features of Cold Sprayed Face Centered Cubic Metals.” Journal of Applied Physics 96 (8): 4288–4292. doi:10.1063/1.1789278.
   Web of Science ®Google Scholar
• Borchers, C., F. Gartner, T. Stoltenhoff, and H. Kreye. 2005. “Formation of Persistent Dislocation Loops by Ultra-high Strain-rate Deformation during Cold Spraying.” Acta Materialia 53 (10): 2991–3000. doi:10.1016/j.actamat.2005.02.048.
   Web of Science ®Google Scholar
• Bu, H., M. Yandouzi, C. Lu, and B. Jodoin. 2012. “Post-heat Treatment Effects on Cold-sprayed Aluminum Coatings on AZ91D Magnesium Substrates.” Journal of Thermal Spray Technology 21 (3–4): 731–739. doi:10.1007/s11666-012-9785-7.
   Web of Science ®Google Scholar
• Byakova, A. V., M. M. Kiz, A. I. Sirko, M. S. Yakovleva, and Y. V. Milman. 2010. “Cold-sprayed Coatings Based on High Strength Aluminium Alloys Reinforced by Quasicrystalline Particles: Microstructure and Key Properties.” High Temperature Materials and Processes 29 (5–6): 325–338. doi:10.1515/HTMP.2010.29.5-6.325.
   Web of Science ®Google Scholar
• Cadney, S., M. Brochu, P. Richer, and B. Jodoin. 2008. “Cold Gas Dynamic Spraying as a Method for Free Forming and Joining Materials.” Surface & Coatings Technology 202: 2801–2806. doi:10.1016/j.surfcoat.2007.10.010.
   Web of Science ®Google Scholar
• Canova, G. R., C. Fressengeas, A. Molinari, and U. F. Kocks. 1988. “Effect of Rate Sensitivity on Slip System Activity and Lattice Rotation.” Acta Metallurgica 36 (8): 1961–1970. doi:10.1016/0001-6160(88)90298-2.
   Google Scholar
• Cavaliere, P., A. Silvello, N. Cinca, H. Canales, S. Dosta, I. Garcia Cano, and J. M. Guilemany. 2017. “Microstructural and Fatigue Behavior of Cold Sprayed Ni-based Superalloys Coatings.” Surface & Coatings Technology 324: 390–402. doi:10.1016/j.surfcoat.2017.06.006.
   Web of Science ®Google Scholar
• Champagne, V. K. 2007. The Cold Spray Materials Deposition Process Fundamentals and Applications. Metals and Surface Engineering, Cambridge, United Kingdom: Woodhead Publishing Series.
   Google Scholar
• Chavan, N. M., B. Kiran, A. Jyothirmayi, P. S. Phani, and G. Sundararajan. 2013. “The Corrosion Behavior of Cold Sprayed Zinc Coatings on Mild Steel Substrate.” Journal of Thermal Spray Technology 22: 463–470. doi:10.1007/s11666-013-9893-z.
   Web of Science ®Google Scholar
• Choi, W. B., L. Li, V. Luzin, R. Neiser, T. Gnäupel-Herold, H. J. Prask, S. Sampath, and A. Gouldstone. 2007. “Integrated Characterization of Cold Sprayed Aluminum Coatings.” Acta Materialia 55 (3): 857–866. doi:10.1016/j.actamat.2006.09.006.
   Web of Science ®Google Scholar
• Cinca, N., J. M. Rebled, S. Estradé, F. Peiró, J. Fernández, and J. M. Guilemany. 2013. “Influence of the Particle Morphology on the Cold Gas Spray Deposition Behavior of Titanium on Aluminum Light Alloys.” Journal of Alloys and Compounds 554: 89–96. doi:10.1016/j.jallcom.2012.11.069.
   Web of Science ®Google Scholar
• Cizek, J., O. Kovarik, J. Siegl, K. A. Khor, and I. Dlouhy. 2013. “Influence of Plasma and Cold Spray Deposited Ti Layers on High-cycle Fatigue Properties of Ti6Al4V Substrates.” Surface & Coatings Technology 217: 23–33. doi:10.1016/j.surfcoat.2012.11.067.
   Web of Science ®Google Scholar
• Couto, M., S. Dosta, M. Torrell, J. Fernández, and J. M. Guilemany. 2013. “Cold Spray Deposition of WC-17 and 12Co Cermets onto Aluminum.” Surface & Coatings Technology 235: 54–61. doi:10.1016/j.surfcoat.2013.07.011.
   Web of Science ®Google Scholar
• Da Silva, F. S., J. Bedoya, S. Dosta, N. Cinca, I. G. Cano, J. M. Guilemany, and A. V. Benedetti. 2017. “Corrosion Characteristics of Cold Gas Spray Coatings of Reinforced Aluminum Deposited onto Carbon Steel.” Corrosion Science 114: 57–71. doi:10.1016/j.corsci.2016.10.019.
   Web of Science ®Google Scholar
• DeForce, B. S., T. J. Eden, and J. K. Potter. 2011. “Cold Spray Al-5% Mg Coatings for the Corrosion Protection of Magnesium Alloys.” Journal of Thermal Spray Technology 20: 1352–1358. doi:10.1007/s11666-011-9675-4
   Web of Science ®Google Scholar
• Diab, M., X. Pang, and H. Jahed. 2017. “The Effect of Pure Aluminum Cold Spray Coating on Corrosion and Corrosion Fatigue of Magnesium (3% Al-1% Zn) Extrusion.” Surface & Coatings Technology 309: 423–435. doi:10.1016/j.surfcoat.2016.11.014.
   Web of Science ®Google Scholar
• Dosta, S., M. Couto, and J. M. Guilemany. 2013. “Cold Spray Deposition of a WC-25Co Cermet onto Al7075-T6 and Carbon Steel Substrates.” Acta Materialia 61: 643–652. doi:10.1016/j.actamat.2012.10.011.
   Web of Science ®Google Scholar
• Dykhuizen, R., and M. Smith. 1998. “Gas Dynamic Principles of Cold Spray.” Journal of Thermal Spray Technology 7: 205–212. doi:10.1361/105996398770350945.
   Web of Science ®Google Scholar
• Dykhuizen, R. C., M. F. Smith, D. L. Gilmore, R. A. Neiser, X. Jiang, and S. Sampath. 1999. “Impact of High Velocity Cold Spray Particles.” Journal of Thermal Spray Technology 8 (4): 559–564. doi:10.1361/105996399770350250.
   Web of Science ®Google Scholar
• Dzhurinskiy, D., E. Maeva, E. Leshchinsky, and R. G. Maev. 2012. “Corrosion Protection of Light Alloys Using Low Pressure Cold Spray.” Journal of Thermal Spray Technology 21 (2): 304–313. doi:10.1007/s11666-011-9729-7.
   Web of Science ®Google Scholar
• Eason, P. D., S. C. Kennett, T. J. Eden, I. Krull, B. Kowalski, and J. L. Jones. 2012. “In Situ Observation of Micro Strain Relief in Cold-sprayed Bulk Copper during Thermal Annealing.” Scripta Materialia 67: 791–794. doi:10.1016/j.scriptamat.2012.07.029.
   Web of Science ®Google Scholar
• Ernst, K. R., J. Braeutigam, F. Gärtner, and T. Klassen. 2012. “Effect of Substrate Temperature on Cold-Gas Sprayed Coatings on Ceramic Substrates.” Journal of Thermal Spray Technology 22: 422–432. doi:10.1007/s11666-012-9871-x.
   Web of Science ®Google Scholar
• Frodelius, J., M. Sonestedt, S. Björklund, J.-P. Palmquist, K. Stiller, H. Högberg, and L. Hultman. 2008. “Ti2AlC Coatings Deposited by High Velocity Oxy-fuel Spraying.” Surface & Coatings Technology.” 202 (24): 5976–5981. doi:10.1016/j.surfcoat.2008.06.184.
   Web of Science ®Google Scholar
• Gartner, F., T. Stoltenhoff, J. Voyer, H. Kreye, S. Riekehr, and M. Koçak. 2006. “Mechanical Properties of Cold-sprayed and Thermally Sprayed Copper Coatings.” Surface & Coatings Technology 200 (24): 6770–6782. doi:10.1016/j.surfcoat.2005.10.007.
   Web of Science ®Google Scholar
• Ghelichi, R., S. Bagherifard, D. MacDonald, I. Fernandez-Pariente, B. Jodoin, and M. Guagliano. 2014. “Experimental and Numerical Study of Residual Stress Evolution in Cold Spray Coating.” Applied Surface Science 288: 26–33. doi:10.1016/j.apsusc.2013.09.074.
   Web of Science ®Google Scholar
• Ghelichi, R., D. MacDonald, S. Bagherifard, H. Jahed, M. Guagliano, and B. Jodoin. 2012. “Microstructure and Fatigue Behavior of Cold Spray Coated Al5052.” Acta Materialia 60: 6555–6561.
   Web of Science ®Google Scholar
• Gilmore, D., R. Dykhuizen, R. Neiser, T. J. Roemer, and M. F. Smith. 1999. “Particle Velocity and Deposition Efficiency in the Cold Spray Process.” Journal of Thermal Spray Technology 8 (4): 576–582. doi:10.1361/105996399770350278.
   Web of Science ®Google Scholar
• Goldbaum, D., J. Ajaja, R. R. Chromik, W. Wong, S. Yue, E. Irissou, and J.-G. Legoux. 2011a. “Mechanical Behavior of Ti Cold Spray Coatings Determined by a Multi-scale Indentation Method.” Materials Science and Engineering A 530: 253–265. doi:10.1016/j.msea.2011.09.083.
   Web of Science ®Google Scholar
• Goldbaum, D., R. R. Chromik, N. Brodusch, and R. Gauvin. 2015. “Microstructure and Mechanical Properties of Ti Cold-spray Splats Determined by Electron Channeling Contrast Imaging and Nanoindentation Mapping.” Microscopy and Microanalysis 21 (3): 570–581. doi:10.1017/S1431927615000240.
   PubMed Web of Science ®Google Scholar
• Goldbaum, D., R. R. Chromik, S. Yue, E. Irissou, and J.-G. Legoux. 2011b. “Mechanical Property Mapping of Cold Spray Ti Splats.” Journal of Thermal Spray Technology 20: 486–496. doi:10.1007/s11666-010-9546-4.
   Web of Science ®Google Scholar
• Goldbaum, D., P. Manimuda, G. Kamath, S. Descartes, J. E. Klemberg-Sapieha, and R. R. Chromik. 2016. “Tribological Behavior of TiN and Ti (Si,c)n Coatings on Cold Sprayed Ti Substrates.” Surface & Coatings Technology 291: 264–275. doi:10.1016/j.surfcoat.2016.02.044.
   Web of Science ®Google Scholar
• Grujicic, M., W. S. DeRosset, and D. Helfritch. 2003. “Flow Analysis and Nozzle-shape Optimization for the Cold-gas Dynamic-spray Process.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 217: 1603–1613. doi:10.1243/095440503771909980.
   Web of Science ®Google Scholar
• Grujicic, M., J. R. Saylor, D. E. Beasley, W. S. DeRosset, and D. Helfritch. 2003. “Computational Analysis of the Interfacial Bonding between Feed-powder Particles and the Substrate in the Cold-gas Dynamic-spray Process.” Applied Surface Science 219: 211–227. doi:10.1016/S0169-4332(03)00643-3.
   Web of Science ®Google Scholar
• Grujicic, M., C. L. Zhao, W. S. DeRosset, and D. Helfritch. 2004. “Adiabatic Shear Instability Based Mechanism for Particles/substrate Bonding in the Cold-gas Dynamic-spray Process.” Materials & Design 25 (8): 681–688. doi:10.1016/j.matdes.2004.03.008.
   Web of Science ®Google Scholar
• Guetta, S., M. H. Berger, F. Borit, V. Guipont, M. Jeandin, M. Boustie, Y. Ichikawa, K. Sakaguchi, and K. Ogawa. 2009. “Influence of Particle Velocity on Adhesion of Cold-sprayed Splats.” Journal of Thermal Spray Technology 18 (3): 331–342. doi:10.1007/s11666-009-9327-0.
   Web of Science ®Google Scholar
• Hall, A., L. Brewer, and T. Roemer. 2008. “Preparation of Aluminum Coatings Containing Homogenous Nanocrystalline Microstructures Using the Cold Spray Process.” Journal of Thermal Spray Technology 17: 352–359. doi:10.1007/s11666-008-9180-6.
   Web of Science ®Google Scholar
• Hall, A. C., D. J. Cook, R. A. Neiser, T. J. Roemer, and D. A. Hirschfeld. 2006. “The Effect of a Simple Annealing Heat Treatment on the Mechanical Properties of Coldsprayed Aluminum.” Journal of Thermal Spray Technology 15: 233–238. doi:10.1361/105996306X108138.
   Web of Science ®Google Scholar
• Hassani-Gangaraj, S. M., A. Moridi, and M. Guagliano. 2015. “Critical Review of Corrosion Protection by Cold Spray Coatings.” Surface Engineering 31: 803–815. doi:10.1179/1743294415Y.0000000018.
   Web of Science ®Google Scholar
• Huang, R., W. Ma, and H. Fukanuma. 2014. “Development of Ultra-strong Adhesive Strength Coatings Using Cold Spray.” Surface & Coatings Technology 258: 832–841. doi:10.1016/j.surfcoat.2014.07.074.
   Web of Science ®Google Scholar
• Huang, R., M. Sone, W. Ma, and H. Fukanuma. 2015. “The Effects of Heat Treatment on the Mechanical Properties of Cold-sprayed Coatings.” Surface & Coatings Technology 261: 278–288. doi:10.1016/j.surfcoat.2014.11.017.
   Web of Science ®Google Scholar
• Hussain, T., D. McCartney, P. H. Shipway, and D. Zhang. 2009. “Bonding Mechanisms in Cold Spraying: The Contributions of Metallurgical and Mechanical Components.” Journal of Thermal Spray Technology 18 (3): 364–379. doi:10.1007/s11666-009-9298-1.
   Web of Science ®Google Scholar
• Johnson, G. R., T. J. Holmquist, S. C. Schmidt, J. W. Shaner, G. A. Samara, and M. Ross. 1993. High Pressure Science and Technology, 981–984. New York: AIP Press. 1994.
   Google Scholar
• Kang, K., J. Won, G. Bae, S. Ha, and C. Lee. 2012. “Interfacial Bonding and Microstructural Evolution of Al in Kinetic Spraying.” Journal of Materials Science 47 (11): 4649–4659. doi:10.1007/s10853-012-6332-3.
   Web of Science ®Google Scholar
• Kay, C. M., and J. Karthikeyan. 2016. “High Pressure Cold Spray.” ASM International. ISBN: 978-1-62708-096-5.
   Google Scholar
• Khun, N. W., A. Tan, W. Y. Sun, and E. Liu. 2017. “Wear and Corrosion Resistance of Thick Ti-6Al-4V Coating Deposited on Ti-6Al-4V Substrate via High Pressure Cold Spray.” Journal of Thermal Spray Technology 26: 1393–1407. doi:10.1007/s11666-017-0588-8.
   Web of Science ®Google Scholar
• Kim, H. J., C. H. Lee, and S. Y. Hwang. 2005. “Superhard Nano WC-12% Co Coating by Cold Spray Deposition.” Materials Science and Engineering A 391: 243–248. doi:10.1016/j.msea.2004.08.082.
   Web of Science ®Google Scholar
• Kim, K., M. Watanabe, and S. Kuroda. 2010. “Bonding Mechanisms of Thermally Softened Metallic Powder Particles and Substrates Impacted at High Velocity.” Surface & Coatings Technology 204: 2175–2180. doi:10.1016/j.surfcoat.2009.12.001.
   Web of Science ®Google Scholar
• Kim, K., M. Watanabe, K. Mitsuishi, K. Iakoubovskii, and S. Kuroda. 2009. “Impact Bonding and Rebounding between Kinetically Sprayed Titanium Particle and Steel Substrate Revealed by High-resolution Electron Microscopy.” Journal of Physics D: Applied Physics 42 (6): 65304. doi:10.1088/0022-3727/42/6/065304.
   Web of Science ®Google Scholar
• King, P. C., G. Bae, S. H. Zahiri, M. Jahedi, and C. Lee. 2010. “An Experimental and Finite Element Study of Cold Spray Copper Impact onto Two Aluminum Substrates.” Journal of Thermal Spray Technology 19 (3): 620–634. doi:10.1007/s11666-009-9454-7.
   Web of Science ®Google Scholar
• King, P. C., S. H. Zahiri, and M. Jahedi. 2008. “Focused Ion Beam Micro-dissection of Cold-sprayed Particles.” Acta Materialia 56: 5617–5626. doi:10.1016/j.actamat.2008.07.034.
   Web of Science ®Google Scholar
• King, P. C., S. H. Zahiri, and M. Jahedi. 2009. “Microstructural Refinement within a Cold-sprayed Copper Particle.” Metallurgical Materials Transactions A 9: 2115–2123. doi:10.1007/s11661-009-9882-5.
   Google Scholar
• Klassen, T., F. Gartner, and H. Assadi. 2016. “Process Science of Cold Spray.” In High Pressure Cold Spray: Principles and Applications, edited by C. M. Kay and J. Karthikeyan.Materials Park, OH (Ohio), U.S, ASM International.
   Google Scholar
• Klinkov, S., V. Kosarev, and M. Rein. 2005. “Cold Spray Deposition: Significance of Particle Impact Phenomena.” Aerospace Science and Technology 9: 582–591. doi:10.1016/j.ast.2005.03.005.
   Web of Science ®Google Scholar
• Ko, K., J. O. Choi, H. Lee, Y. K. Seo, S. P. Jung, and S. S. Yu. 2015. “Cold Spray Induced Amorphization at the Interface between Fe Coatings and Al Substrate.” Materials Letters 149: 40–42. doi:10.1016/j.matlet.2015.02.118.
   Web of Science ®Google Scholar
• Ko, K. H., J. O. Choi, and H. Lee. 2014. “Pretreatment Effect of Cu Feedstock on Cold-sprayed Coatings.” Journal of Material Processing Technology 214: 1530–1535. doi:10.1016/j.jmatprotec.2014.02.020.
   Web of Science ®Google Scholar
• Koivuluoto, H., J. Larjo, D. Marini, G. Pulci, and F. Marra. 2020. “Cold-Sprayed Al6061 Coatings: Online Spray Monitoring and Influence of Process Parameters on Coating Properties.” Coatings 10 (4): 348. doi:10.3390/coatings10040348.
   Web of Science ®Google Scholar
• Kumar, S., S. Kiran Reddy, and S. V. Joshi. 2017. “Microstructure and Performance of Cold Sprayed Al-SiC Composite Coatings with High Fraction of Particulates.” Surface & Coatings Technology 318: 62–71. doi:10.1016/j.surfcoat.2016.11.047.
   Web of Science ®Google Scholar
• Kumar, S., V. Vidyasagar, A. Jyothirmayi, and S. V. Joshi. 2016. “Effect of Heat Treatment on Mechanical Properties and Corrosion Performance of Cold-sprayed Tantalum Coatings.” Journal of Thermal Spray Technology 25 (4): 745–756. doi:10.1007/s11666-016-0388-6.
   Web of Science ®Google Scholar
• Lahiri, D., P. K. Gill, S. Scudino, C. Zhang, V. Singh, J. Karthikeyan, N. Munroe, S. Seal, and A. Agarwal. 2013. “Cold Sprayed Aluminum Based Glassy Coating: Synthesis, Wear and Corrosion Properties.” Surface & Coatings Technology 232: 33–40. doi:10.1016/j.surfcoat.2013.04.049.
   Web of Science ®Google Scholar
• Lee, C., and J. Kim. 2015. “Microstructure of Kinetic Spray Coatings: A Review.” Journal of Thermal Spray Technology 24: 592–610. doi:10.1007/s11666-015-0223-5.
   Web of Science ®Google Scholar
• Li, C., W. Li, and Y. Wang. 2005. “Formation of Meta Stable Phases in Cold-sprayed Soft Metallic Deposit.” Surface & Coatings Technology 198: 469–473. doi:10.1016/j.surfcoat.2004.10.063.
   Web of Science ®Google Scholar
• Li, C. J., and W. Y. Li. 2003. “Deposition Characteristics of Titanium Coating in Cold Spraying.” Surface & Coatings Technology.” 167: 278–283. doi:10.1016/S0257-8972(02)00919-2.
   Web of Science ®Google Scholar
• Li, C. J., W. Y. Li, and Y. Y. Wang. 2003. Effect of Spray Angle on Deposition Characteristics in Cold Spraying, Advancing the Science & Applying the Technology, 91–96. Ohio: ASM International, Materials Park.
   Google Scholar
• Li, W., K. Yang, D. Zhang, and X. Zhou. 2016. “Residual Stress Analysis of Cold-sprayed Copper Coatings by Numerical Simulation.” Journal of Thermal Spray Technology 25 (1–2): 131–142. doi:10.1007/s11666-015-0308-1.
   Web of Science ®Google Scholar
• Li, W.-Y., C. Zhang, X. Guo, J. Xu, C.-J. Li, H. Liao, C. Coddet, and K. Khor. 2007. “Ti and Ti-6Al-4V Coatings by Cold Spraying and Microstructure Modification by Heat Treatment.” Advanced Engineering Materials 9 (5): 418–423. doi:10.1002/adem.200700022.
   Web of Science ®Google Scholar
• Li, W. Y., C. Zhang, X. P. Guo, G. Zhang, H. L. Liao, C.-J. Li, and C. Coddet. 2008. “Effect of Standoff Distance on Coating Deposition Characteristics in Cold Spraying.” Materials Design 29: 297–304. doi:10.1016/j.matdes.2007.02.005.
   Web of Science ®Google Scholar
• Lima, R. S., A. Kucuk, C. C. Berndt, J. Karthikeyan, C. M. Kay, and J. Lindemann. 2002. “Deposition Efficiency, Mechanical Properties and Coating Roughness in Cold-sprayed Titanium.” Journal of Materials Science Letters 21 (21): 1687–1689. doi:10.1023/A:1020833011448.
   Google Scholar
• Lupoi, R., and W. O’Neill. 2010. “Deposition of Metallic Coatings on Polymer Surfaces Using Cold Spray.” Surface & Coatings Technology 205: 2167–2173. doi:10.1016/j.surfcoat.2010.08.128.
   Web of Science ®Google Scholar
• Luzin, V., K. Spencer, and M. Zhang. 2011. “Residual Stress and Thermo-mechanical Properties of Cold Spray Metal Coatings.” Acta Materialia 59: 1259–1270. doi:10.1016/j.actamat.2010.10.058.
   Web of Science ®Google Scholar
• Ma, C., X. Liu, and C. Zhou. 2014. “Cold-Sprayed Al Coating for Corrosion Protection of Sintered NdFeB.” Journal of Thermal Spray Technology 23: 456–462. doi:10.1007/s11666-013-9994-8.
   Web of Science ®Google Scholar
• Maev, R. G., V. Leshchynsky, E. Strumban, D. Dzhurinskiy, J. Kocimski, and E. Maeva. 2016. “Structure and Mechanical Properties of Thick Copper Coating Made by Cold Spray.” Journal of Thermal Spray Technology 25: 113–122. doi:10.1007/s11666-015-0313-4.
   Web of Science ®Google Scholar
• Maledi, N. B., O. P. Oladijo, I. Botef, T. P. Ntsoane, A. Madiseng, and L. Moloisane. 2017. “Influence of Cold Spray Parameters on the Microstructures and Residual Stress of Zn Coatings Sprayed on Mild Steel.” Surface & Coatings Technology 318: 106–113. doi:10.1016/j.surfcoat.2017.03.062.
   Web of Science ®Google Scholar
• Marrocco, T., D. McCartney, P. H. Shipway, and A. J. Sturgeon. 2006. “Production of Titanium Deposits by Cold-gas Dynamic Spray: Numerical Modeling and Experimental Characterization.” Journal of Thermal Spray Technology 15 (2): 263–272. doi:10.1361/105996306X108219.
   Web of Science ®Google Scholar
• McCune, R. C., A. N. Papyrin, and J. N. Hall. 1995. “An Exploration of the Cold Gas–dynamic Spray Method for Several Material Systems.” In Berndt, C.C.; Sampath, S. (Eds.,) ASM International: In Thermal Spray Science and Technology, 1–5. Houston, TX (United States): ASM International.
   Google Scholar
• Meng, X., J. Zhang, W. Han, J. Zhao, and Y.-L. Liang. 2011. “Influence of Annealing Treatment on the Microstructure and Mechanical Performance of Cold Sprayed 304 Stainless Steel Coating.” Applied Surface Science 258 (2): 700–704. doi:10.1016/j.apsusc.2011.07.107.
   Web of Science ®Google Scholar
• Meng, X. M., J. B. Zhang, W. Han, and J. Zhao. 2012. “Influence of Annealing Treatment on Cold Rolling Behaviour of 304SS Coating by Cold Spraying.” Materials Research Innovations 16 (1): 73–78. doi:10.1179/1433075X11Y.0000000018.
   Web of Science ®Google Scholar
• Miyajima, T., and Y. Iwai. 2003. “Effects of Reinforcements on Sliding Wear Behavior of Aluminum Matrix Composites.” Wear 255: 606–616. doi:10.1016/S0043-1648(03)00066-8.
   Web of Science ®Google Scholar
• Moridi, A., S. M. Hassani-Gangaraj, M. Guagliano, and M. Dao. 2014. “Cold Spray Coating: Review of Material Systems and Future Perspectives.” Surface Engineering 30 (6): 369–395. doi:10.1179/1743294414Y.0000000270.
   Web of Science ®Google Scholar
• Moridi, A., S. M. Hassani-Gangaraj, S. Vezzu, L. Trško, and M. Guagliano. 2015. “Fatigue Behavior of Cold Spray Coatings: The Effect of Conventional and Severe Shot Peening as Pre-/post-treatment.” Surface & Coatings Technology 283: 247–254. doi:10.1016/j.surfcoat.2015.10.063.
   Web of Science ®Google Scholar
• Moy Charles, K. S., J. Cairney, G. Ranzi, M. Jahedi, and S. P. Ringer. 2010. “Investigating the Microstructure and Composition of Cold Gas-dynamic Spray (CGDS) Ti Powder Deposited on Al 6063 Substrate.” Surface & Coatings Technology 204 (23): 3739–3749. doi:10.1016/j.surfcoat.2010.04.016
   Web of Science ®Google Scholar
• Ngai, S., T. Ngai, F. Vogel, W. Story, G. B. Thompson, and L. N. Brewer. 2018. “Saltwater Corrosion Behavior of Cold Sprayed AA7075 Aluminum Alloy Coatings.” Corrosion Science 130: 231–240. doi:10.1016/j.corsci.2017.10.033.
   Web of Science ®Google Scholar
• Novoselova, T., P. Fox, R. Morgan, and W. O’Neill. 2006. “Experimental Study of Titanium/aluminium Deposits Produced by Cold Gas Dynamic Spray.” Surface & Coatings Technology 200: 2775–2783. doi:10.1016/j.surfcoat.2004.10.133.
   Web of Science ®Google Scholar
• Papyrin, A., V. Kosarev, S. Klinkov, A. Alkhimov, and V. M. Fomin. 2006. Cold Spray Technology. 1st ed. Oxford, U.K: Elsevier Science.
   Google Scholar
• Pattison, J., S. Celotto, R. Morgan, M. Bray, and W. O’Neill. 2007. “Cold Gas Dynamic Manufacturing: A Nonthermal Approach to Freeform Fabrication.” International Journal of Machine Tools and Manufacture 47: 627–634. doi:10.1016/j.ijmachtools.2006.05.001.
   Web of Science ®Google Scholar
• Peat, T., A. Galloway, A. Toumpis, R. Steel, W. Zhu, and N. Iqbal. 2017. “Enhanced Erosion Performance of Cold Spray Co-deposited AISI316 MMCs Modified by Friction Stir Processing.” Materials & Design 120: 22–35. doi:10.1016/j.matdes.2017.01.099.
   Web of Science ®Google Scholar
• Phani, P. S., V. Vishnukanthan, and G. Sundararajan. 2007. “Effect of Heat Treatment on Properties of Cold Sprayed Nanocrystalline Copper Alumina Coatings.” Acta Materialia 55: 4741–4751. doi:10.1016/j.actamat.2007.04.044.
   Web of Science ®Google Scholar
• Price, T., P. Shipway, D. McCartney, E. Calla, and D. Zhang. 2007. “A Method for Characterizing the Degree of Inter-particle Bond Formation in Cold Sprayed Coatings.” Journal of Thermal Spray Technology 16 (4): 566–570. doi:10.1007/s11666-007-9070-3.
   Web of Science ®Google Scholar
• Rech, S., A. Surpi, S. Vezzù, A. Patelli, A. Trentin, J. Glor, J. Frodelius, L. Hultman, and P. Eklund. 2013. “Cold-spray Deposition of Ti2AlC Coatings.” Vacuum 94: 69–73. doi:10.1016/j.vacuum.2013.01.023.
   Web of Science ®Google Scholar
• Robotti, M., S. Dosta, C. Fernández-Rodríguez, M. J. Hernández-Rodríguez, I. G. Cano, E. P. Melián, and J. M. Guilemany. 2016. “Photocatalytic Abatement of NOx by C-TiO2/polymer Composite Coatings Obtained by Low Pressure Cold Gas Spraying.” Applied Surface Science 362: 274–280. doi:10.1016/j.apsusc.2015.11.207.
   Web of Science ®Google Scholar
• Rokni, M. R., C. A. Widener, G. A. Crawford, and M. K. West. 2015. “An Investigation into Microstructure and Mechanical Properties of Cold Sprayed 7075 Al Deposition.” Materials Science and Engineering A 625: 19–27. doi:10.1016/j.msea.2014.11.059.
   Web of Science ®Google Scholar
• Sajjadi, S. A., H. R. Ezatpour, and H. Beygi. 2011. “Microstructure and Mechanical Properties of Al–Al2O3 Micro and Nano Composites Fabricated by Stir Casting.” Materials Science and Engineering A 528: 8765–8771. doi:10.1016/j.msea.2011.08.052.
   Web of Science ®Google Scholar
• Saleh, M., V. Luzin, and K. Spencer. 2014. “Analysis of the Residual Stress and Bonding Mechanism in the Cold Spray Technique Using Experimental and Numerical Methods.” Surface & Coatings Technology 252: 15–28. doi:10.1016/j.surfcoat.2014.04.059.
   Web of Science ®Google Scholar
• Sansoucy, E., G. E. Kim, A. L. Moran, and B. Jodoin. 2007. “Mechanical Characteristics of Al-Co-Ce Coatings Produced by the Cold Spray Process.” Journal of Thermal Spray Technology 16 (5–6): 651–660. doi:10.1007/s11666-007-9099-3.
   Web of Science ®Google Scholar
• Santos da Silva, F., N. Cinca, S. Dosta, I. G. Cano, J. M. Guilemany, and A. V. Benedetti. 2017. “Cold Gas Spray Coatings: Basic Principles Corrosion Protection and Applications.” Eclética Química Journal 42: 09–32. doi:10.26850/1678-4618eqj.v42.1.2017.p09-32.
   Google Scholar
• Schmidt, T., F. Gärtner, H. Assadi, and H. Kreye. 2006. “Development of a Generalized Parameter Window for Cold Spray Deposition.” Acta Materialia 54 (3): 729–742. doi:10.1016/j.actamat.2005.10.005.
   Web of Science ®Google Scholar
• Sharma, M. M., T. J. Eden, and B. T. Golesich. 2014. “Effect of Surface Preparation on the Microstructure, Adhesion, and Tensile Properties of Cold-Sprayed Aluminum Coatings on AA2024 Substrates.” Journal of Thermal Spray Technology 24: 410–422. doi:10.1007/s11666-014-0175-1.
   Web of Science ®Google Scholar
• Spencer, K., D. M. Fabijanic, and M. X. Zhang. 2009. “The Use of Al-Al2O3 Cold Spray Coatings to Improve the Surface Properties of Magnesium Alloys.” Surface & Coatings Technology 204: 336–344. doi:10.1016/j.surfcoat.2009.07.032.
   Web of Science ®Google Scholar
• Spencer, K., V. Luzin, N. Matthews, and M.-X. Zhang. 2012. “Residual Stresses in Cold Spray Al Coatings: The Effect of Alloying and of Process Parameters.” Surface & Coatings Technology 206 (19–20): 4249–4255. doi:10.1016/j.surfcoat.2012.04.034.
   Web of Science ®Google Scholar
• Srikanth, A., G. Mohammed Thalib Basha, and B. Venkateshwarlu. 2020. “A Brief Review on Cold Spray Coating Process.” Materials Today: Proceedings 22: 1390–1397.
   Google Scholar
• Stoltenhoff, T., H. Kreye, and H. Richter. 2002. “An Analysis of the Cold Spray Process and Its Coatings.” Journal of Thermal Spray Technology 11: 542–550. doi:10.1361/105996302770348682.
   Web of Science ®Google Scholar
• Suegama, P. H., C. S. Fugivara, A. V. Benedetti, J. Fernández, N. Espallargas, J. Delgado, and J. M. Guilemany. 2007. New Research on Electrochemistry, 113–151. New York: Nova Science Publishers.
   Google Scholar
• Suhonen, T., T. Varis, S. Dosta, M. Torrell, and J. M. Guilemany. 2013. “Residual Stress Development in Cold Sprayed Al, Cu and Ti Coatings.” Acta Materialia 61 (17): 6329–6337. doi:10.1016/j.actamat.2013.06.033.
   Web of Science ®Google Scholar
• Sun, W., A. W. Y. Tan, N. W. Khun, I. Marinescu, and E. Liu. 2017a. “Effect of Substrate Surface Condition on Fatigue Behavior of Cold Sprayed Ti6Al4V Coatings.” Surface & Coatings Technology 320: 452–457. doi:10.1016/j.surfcoat.2016.11.093.
   Web of Science ®Google Scholar
• Sun, W., A. W. Y. Tan, I. Marinescu, W. Q. Toh, and E. Liu. 2017b. “Adhesion, Tribological and Corrosion Properties of Cold-sprayed CoCrMo and Ti6Al4V Coatings on 6061-T651 Al Alloy.” Surface & Coatings Technology 326: 291–298. doi:10.1016/j.surfcoat.2017.07.062.
   Web of Science ®Google Scholar
• Sundararajan, G., P. Sudharshan Phani, A. Jyothirmayi, and R. C. Gundakaram. 2009. “The Influence of Heat Treatment on the Microstructural, Mechanical and Corrosion Behaviour of Cold Sprayed SS 316L Coatings.” Journal of Materials Science 44 (9): 2320–2326. doi:10.1007/s10853-008-3200-2.
   Web of Science ®Google Scholar
• Tan, A. W.-Y., W. Sun, A. Bhowmik, J. Y. Lek, I. Marinescu, F. Li, N. W. Khun, Z. Dong, and E. Liu. 2018. “Effect of Coating Thickness on Microstructure, Mechanical Properties and Fracture Behaviour of Cold Sprayed Ti6Al4V Coatings on Ti6Al4V Substrates.” Surface & Coatings Technology 349: 303–317. doi:10.1016/j.surfcoat.2018.05.060.
   Web of Science ®Google Scholar
• Tao, Y., T. Xiong, C. Sun, L. Kong, X. Cui, T. Li, and G.-L. Song. 2010. “Microstructure and Corrosion Performance of a Cold Sprayed Aluminium Coating on AZ91D Magnesium Alloy.” Corrosion Science 52 (10): 3191–3197. doi:10.1016/j.corsci.2010.05.023.
   Web of Science ®Google Scholar
• Triantou, K. I., D. I. Pantelis, V. Guipont, and M. Jeandin. 2015. “Microstructure and Tribological Behavior of Copper and Composite Copper+alumina Cold Sprayed Coatings for Various Alumina Contents.” Wear 336–337: 96–107. doi:10.1016/j.wear.2015.05.003.
   Web of Science ®Google Scholar
• Tsui, Y. C., and T. W. Clyne. 1997. “An Analytical Model for Predicting Residual Stresses in Progressively Deposited Coatings.” Thin Solid Films 306: 23–33. doi:10.1016/S0040-6090(97)00199-5.
   Google Scholar
• Van Steenkiste, T. H., J. R. Smith, and R. E. Teets. 2002. “Aluminum Coatings via Kinetic Spray with Relatively Large Powder Particles.” Surface & Coatings Technology 154: 237–252. doi:10.1016/S0257-8972(02)00018-X.
   Web of Science ®Google Scholar
• Villa, M., S. Dosta, and J. M. Guilemany. 2013. “Optimization of 316L Stainless Steel Coatings on Light Alloys Using Cold Gas Spray.” Surface & Coatings Technology 235: 220–225. doi:10.1016/j.surfcoat.2013.07.036.
   Web of Science ®Google Scholar
• Villafuerte, J. 2014. “Considering Cold Spray for Additive Manufacturing.” Advanced Materials & Processes 172: 50–52.
   Web of Science ®Google Scholar
• Villafuerte, J. 2015. Modern Cold Spray : Materials, Process, and Applications. Switzerland: Springer International Publishing.
   Google Scholar
• Wang, H. R., B. R. Hou, J. Wang, Q. Wang, and W.-Y. Li. 2008. “Effect of Process Conditions on Microstructure and Corrosion Resistance of Cold-sprayed Ti Coatings.” Journal of Thermal Spray Technology 17: 736–741. doi:10.1007/s11666-008-9256-3.
   Web of Science ®Google Scholar
• Wang, Q., N. Birbilis, and M.-X. Zhang. 2011. “Interfacial Structure between Particles in an Aluminum Deposit Produced by Cold Spray.” Materials Letters 65: 1576–1578. doi:10.1016/j.matlet.2011.03.035.
   Web of Science ®Google Scholar
• Wang, Q., D. Qiu, Y. Xiong, N. Birbilis, and M.-X. Zhang. 2014. “High Resolution Microstructure Characterization of the Interface between Cold Sprayed Al Coating and Mg Alloy Substrate.” Applied Surface Science 289: 366–369. doi:10.1016/j.apsusc.2013.10.168.
   Web of Science ®Google Scholar
• Watson, T. J., A. Nardi, A. T. Ernst, I. Cernatescu, B. A. Bedard, and M. Aindow. 2017. “Cold Spray Deposition of an Icosahedral-phase-strengthened Aluminum Alloy Coating.” Surface & Coatings Technology 324: 57–63. doi:10.1016/j.surfcoat.2017.05.049.
   Web of Science ®Google Scholar
• Wong, W., E. Irissou, P. Vo, M. Sone, F. Bernier, J.-G. Legoux, H. Fukanuma, and S. Yue. 2013. “Cold Spray Forming of Inconel 718.” Journal of Thermal Spray Technology 22 (2–3): 413–421. doi:10.1007/s11666-012-9827-1.
   Web of Science ®Google Scholar
• Xie, Y., M.-P. Planche, R. Raoelison, P. Hervé, X. Suo, P. He, and H. Liao. 2017. “Investigation on the Influence of Particle Preheating Temperature on Bonding of Cold-sprayed Nickel Coatings.” Surface & Coatings Technology 318: 99–105. doi:10.1016/j.surfcoat.2016.09.037.
   Web of Science ®Google Scholar
• Xiong, Y., G. Bae, X. Xiong, and C. Lee. 2010. “The Effects of Successive Impacts and Cold Welds on the Deposition Onset of Cold Spray Coatings.” Journal of Thermal Spray Technology 19 (3): 575–585. doi:10.1007/s11666-009-9455-6.
   Web of Science ®Google Scholar
• Xiong, Y., K. Kang, G. Bae, S. Yoon, and C. Lee. 2008. “Dynamic Amorphization and Recrystallization of Metals in Kinetic Spray Process.” Applied Physics Letters 92 (19): 194101. doi:10.1063/1.2928218.
   Web of Science ®Google Scholar
• Xiong, Y., X. Xiong, S. Yoon, G. Bae, and C. Lee. 2011. “Dependence of Bonding Mechanisms of Cold Sprayed Coatings on Strain-rate-induced Non-equilibrium Phase Transformation.” Journal of Thermal Spray Technology 20 (4): 860–865. doi:10.1007/s11666-011-9634-0.
   Web of Science ®Google Scholar
• Ye, H., and J. Wang. 2014. “Preparation of Aluminum Coating on Lexan by Cold Spray.” Materials Letters 137: 21–24. doi:10.1016/j.matlet.2014.08.119.
   Web of Science ®Google Scholar
• Yin, S., Y. Xie, X. Suo, H. Liao, and X. Wang. 2015. “Interfacial Bonding Features of Ni Coating on Al Substrate with Different Surface Pretreatments in Cold Spray.” Material Letters 138: 143–147. doi:10.1016/j.matlet.2014.10.016.
   Web of Science ®Google Scholar
• Yin, S., X. Wang, W. Li, H. Liao, and H. Jie. 2012. “Deformation Behavior of the Oxide Film on the Surface of Cold Sprayed Powder Particle.” Applied Surface Science 259: 294–300. doi:10.1016/j.apsusc.2012.07.036.
   Web of Science ®Google Scholar
• Zahiri, S. H., D. Fraser, and M. Jahedi. 2009. “Recrystallization of Cold Spray-fabricated CP Titanium Structures.” Journal of Thermal Spray Technology 18: 16–22. doi:10.1007/s11666-008-9212-2.
   Web of Science ®Google Scholar
• Zhou, X., A. Chen, J. Liu, X. K. Wu, and J. S. Zhang. 2011. “Preparation of Metallic Coatings on Polymer Matrix Composites by Cold Spray.” Surface & Coatings Technology 206 (1): 132–136. doi:10.1016/j.surfcoat.2011.07.005.
   Web of Science ®Google Scholar
• Zhou, X., and M. Pravansu. 2012. “Electrochemical Behavior of Cold Sprayed Hydroxyapatite/titanium Composite in Hanks’ Solution.” Electrochimica Acta 65: 134–140. doi:10.1016/j.electacta.2012.01.018.
   Web of Science ®Google Scholar
• Zhu, Q. J., K. Wang, X. H. Wang, and B. R. Hou. 2012. “Electrochemical Impedance Spectroscopy Analysis of Cold Sprayed and Arc Sprayed Aluminium Coatings Serviced in Marine Environment.” Surface Engineering 28: 300–305. doi:10.1179/1743294411Y.0000000036.
   Web of Science ®Google Scholar
• Ziemian, C. W., M. Sharma, B. D. Bouffard, T. Nissley, and T. J. Eden. 2014. “Effect of Substrate Surface Roughening and Cold Spray Coating on the Fatigue Life of AA2024 Specimens.” Materials & Design 54: 212–221. doi:10.1016/j.matdes.2013.08.061.
   Web of Science ®Google Scholar
• Zou, Y., W. Qin, E. Irissou, J.-G. Legoux, S. Yue, and J. A. Szpunar. 2009. “Dynamic Recrystallization in the Particle/particle Interfacial Region of Cold-sprayed Nickel Coating.” Scripta Materialia 61: 899–902. doi:10.1016/j.scriptamat.2009.07.020.
   Web of Science ®Google Scholar