Influence of arc constriction current (ACC) on microstructural evolution and tensile properties of tungsten inert gas welded thin sheets of aerospace alloy

References

• Abdul Jawwad, A. K., M. Strangwood, and C. L. Davis. 2005. “Microstructural Modification in Full Penetration and Partial Penetration Electron Beam Welds in INCONEL-718 (IN-718) and Its Effect on Fatigue Crack Initiation.” Metallurgical and Materials Transactions A 36 (5): 1237–1247. doi:10.1007/s11661-005-0216-y.
   Google Scholar
• Anbarasan, N., S. Jerome, and N. Arivazhagan. 2019. “Argon and Argon-hydrogen Shielding Gas Effects on the Laves Phase Formation and Corrosion Behavior of Inconel 718 Gas Tungsten Arc Welds.” Journal of Materials Processing Technology 263: 374–384. doi:10.1016/j.jmatprotec.2018.07.038.
   Web of Science ®Google Scholar
• Bansal, A., A. K. Sharma, S. Das, and P. Kumar. 2016. “Characterization of Microstructure and Strength of Microwave Welded Inconel 718 Joints at 2.45 GHz Frequency.” Kovove Materialy 54: 27–35. doi:10.4149/km_2016_1_27.
   Web of Science ®Google Scholar
• Cai, D., W. Zhang, P. Nie, W. Liu, and M. Yao. 2007. “Dissolution Kinetics of δ Phase and Its Influence on the Notch Sensitivity of Inconel 718.” Materials Characterization 58: 220–225. doi:10.1016/j.matchar.2006.04.020.
   Web of Science ®Google Scholar
• Cao, X., B. Rivaux, M. Jahazi, J. Cuddy, and A. Birur. 2009. “Effect of Pre- and Post-weld Heat Treatment on Metallurgical and Tensile Properties of Inconel 718 Alloy Butt Joints Welded Using 4 kW Nd: YAG Laser.” Journal of Materials Science 44: 4557–4571. doi:10.1007/s10853-009-3691-5.
   Web of Science ®Google Scholar
• Chaturvedi, M. C. 2007. “Liquation Cracking in Heat Affected Zone in Ni Superalloy Welds.” Materials Science Forum 546–549: 1163–1170. d oi:10. 4028/www.scientific.net/MSF .546- 549.1 163.
   Google Scholar
• Clarke, D., and S. Bold. 2001. “Materials Developments in Aeroengine Gas Turbines.” In Aerospace Materials, edited by B. Cantor, H. Assender, and P. Grant, 71–80. Bristol: Institute of Physics Publishing.
   Google Scholar
• Cortés, R., E. R. Barragán, V. H. López, R. Ambriz, and D. Jaramillo. 2017. “Mechanical Properties of Inconel 718 Welds Performed by Gas Tungsten Arc Welding.” The International Journal of Advanced Manufacturing Technology 94 (9–12): 3949–3961. doi:10.1007/s00170-017-1128-x.
   Web of Science ®Google Scholar
• Deshpande, Y. V., A. B. Andhare, and P. M. Padole 2018. “Experimental Results on the Performance of Cryogenic Treatment of Tool and Minimum Quantity Lubrication for Machinability Improvement in the Turning of Inconel 718.” Journal of the Brazilian Society of Mechanical Sciences and Engineering 40 (6). doi:10.1007/s40430-017-0920-8.
   Google Scholar
• Fu, S. H., J. X. Dong, M. C. Zhang, and X. S. Xie. 2009. “Alloy Design and Development of INCONEL718 Type Alloy.” Materials Science and Engineering A 499 (1–2): 215–220. doi:10.1016/j.msea.2007.11.115.
   Web of Science ®Google Scholar
• Gao, P., K. Zhang, B. Zhang, S. Jiang, and B. Zhang. 2011. “Microstructures and High Temperature Mechanical Properties of Electron Beam Welded Inconel 718 Superalloy Thick Plate.” Transactions of Nonferrous Metals Society of China 21 (2): s315–s322. doi:10.1016/S1003-6326(11)61598-7.
   Google Scholar
• Geddes, B., H. Leon, and X. Huang. 2010. Superalloys: Alloying and Performance. Materials Park, Ohio, US:.ASM International.
   Google Scholar
• Henderson, M. B., D. Arrell, R. Larsson, M. Heobel, and G. Marchant. 2004. “Nickel Based Superalloy Welding Practices for Industrial Gas Turbine Applications.” Science and Technology of Welding and Joining 9 (1): 13–21. doi:10.1179/136217104225017099.
   Web of Science ®Google Scholar
• Jia, Z., X. Wan, and D. Guo. 2019. “Study on Microstructure and Mechanical Properties of Inconel718 Components Fabricated by UHFP-GTAW Technology.” Materials Letters 261: 1–9. doi:10.1016/j.matlet.2019.127006.
   Web of Science ®Google Scholar
• Khan, T., and M. P. Bacos. 2001. “Blading Materials and Systems in Advanced Aeroengines.” In Aerospace Materials, edited by B. Cantor, H. Assender, and P. Grant, 81–88. Bristol: Institute of Physics Publishing.
   Google Scholar
• Kumar, H., G. N. Ahmad, and N. K. Singh. 2019. “Activated Flux TIG Welding of Inconel 718 Super Alloy in Presence of Tri-component Flux.” Materials and Manufacturing Processes 34 (2): 216–223. doi:10.1080/10426914.2018.1532581.
   Web of Science ®Google Scholar
• Kwon, S. I., S. H. Bae, J. H. Do, C. Y. Jo, and H. U. Hong. 2016. “Characterization of the Microstructures and the Cryogenic Mechanical Properties of Electron Beam Welded Inconel 718.” Metallurgical and Materials Transactions A 47: 777–787. doi:10.1007/s11661-015-3269-6.
   Google Scholar
• Leary, R. K., E. Merson, K. Birmingham, D. Harvey, and R. Brydson. 2010. “Microstructural and Microtextural Analysis of InterPulse GTCAW Welds in Cp-Ti and Ti–6Al–4V.” Materials Science and Engineering A 527: 7694–7705. doi:10.1016/j.msea.2010.08.036.
   Web of Science ®Google Scholar
• Manikandan, S. G. K., D. Sivakumar, M. Kamaraj, and K. P. Rao. 2012. “Laves Phase Control in Inconel 718 Weldments.„ Materials Science Forum 710: 614–619. d oi:10. 4028/www.scientific.net/MSF. 710. 614.
   Google Scholar
• Manikandan, S. G. K., D. Sivakumar, K. P. Rao, and M. Kamaraj. 2014. “Effect of Weld Cooling Rate on Laves Phase Formation in Inconel 718 Fusion Zone.” Journal of Materials Processing Technology 214: 358–364. doi:10.1016/j.jmatprotec.2013.09.006.
   Web of Science ®Google Scholar
• Mehrabian, R., B. H. Kear, and M. Cohen. 1978. Rapid Solidification Processing: Principles and Technologies. Part I, 398. Baton Rouge, LA: Claitor’s Publication Division.
   Google Scholar
• Mouritz, A. 2012. Introduction to Aerospace Materials. 1st ed. Cambridge, UK: Woodland Publishing.
   Google Scholar
• Odabasi, A., N. Unlu, G. Goller, and M. N. Eruslu. 2010. “A Study on Laser Beam Welding (LBW) Technique: Effect of Heat Input on the Microstructural Evolution of Superalloy Inconel 718.” Metallurgical and Materials Transactions A 41: 2357–2365. doi:10.1007/s11661-010-0319-y.
   Google Scholar
• Radhakrishna, C. H., and K. P. Rao. 1994. “Studies on Creep/stress Rupture Behaviour of Superalloy 718 Weldments Used in Gas Turbine Applications.” Materials at High Temperatures 12 (4): 323–327. doi:10.1080/09603409.1994.11752536.
   Web of Science ®Google Scholar
• Radhakrishna, C. H., and K. P. Rao. 1997. “The Formation and Control of Laves Phase in Superalloy 718 Welds.” Journal of Materials Science 32: 1977–1984. doi:10.1023/A:1018541915113.
   Web of Science ®Google Scholar
• Ram, G. D. J., A. V. Reddy, K. Prasad Rao, G. M. Reddy, and J. K. Sarin Sundar. 2005a. “Microstructure and Tensile Properties of Inconel 718 Pulsed Nd-YAG Laser Welds.” Journal of Materials Processing Technology 167 (1): 73–82. doi:10.1016/j.jmatprotec.2004.09.081.
   Web of Science ®Google Scholar
• Ram, G. D. J., A. V. Reddy, K. P. Rao, and G. M. Reddy. 2004. “Control of Laves Phase in Inconel 718 GTA Welds with Current Pulsing.” Science and Technology of Welding and Joining 9 (5): 390–398. doi:10.1179/136217104225021788.
   Web of Science ®Google Scholar
• Ram, G. D. J., A. V. Reddy, K. P. Rao, and G. M. Reddy. 2005b. “Microstructure and Mechanical Properties of Inconel 718 Electron Beam Welds.” Materials Science and Technology 21: 1132–1138. doi:10.1179/174328405X62260.
   Web of Science ®Google Scholar
• Rao, S. G., K. Saravanan, G. Harikrishnan, V. M. J. Sharma, P. Ramesh Narayan, K. Sreekumar, and P. Sinha. 2012. “Local Deformation Behaviour of Inconel 718 TIG Weldments at Room Temperature and 550°C.” Materials Science Forum 710: 439–444. d oi:10.4 028/www.scientific.net/MSF .710. 439.
   Google Scholar
• Reddy, G. M., C. V. S. Murthy, K. S. Rao, and K. P. Rao. 2009. “Improvement of Mechanical Properties of Inconel 718 Electron Beam Welds—Influence of Welding Techniques and Post Weld Heat Treatment.” The International Journal of Advanced Manufacturing Technology 43 (7–8): 671–680. doi:10.1007/s00170-008-1751-7.
   Web of Science ®Google Scholar
• Rezaei, M. A., and H. Naffakh-Moosavy. 2018. “The Effect of Pre-cold Treatment on Microstructure, Weldability and Mechanical Properties in Laser Welding of Superalloys.” Journal of Manufacturing Processes 34: 339–348. doi:10.1016/j.jmapro.2018.06.018.
   Web of Science ®Google Scholar
• Rodríguez, N. K., E. R. Barragán, I. V. Lijanova, R. Cortés, R. Ambriz, C. Méndez, and D. Jaramillo. 2017. “Heat Input Effect on the Mechanical Properties of Inconel 718 Gas Tungsten Arc Welds.” Proceedings of the 17th International Conference on New Trends in Fatigue and Fracture 255–262. doi:10.1007/978-3-319-70365-7_29.
   Google Scholar
• Rokhlins, S., and A. Guu. 1993. “A Study of Arc Force, Pool Depression and Weld Penetration during Gas Tungsten Arc Welding.” Welding Journal 72 (8): 381s–390s.
   Google Scholar
• Sivaprasad, K., and S. G. S. Raman. 2008. “Influence of Weld Cooling Rate, on Microstructure and Mechanical Properties of Alloy 718 Weldments.” Metallurgical and Materials Transactions A 39A: 2115–2127. doi:10.1007/s11661-008-9553-y.
   Web of Science ®Google Scholar
• Sivaprasad, K., S. G. S. Raman, P. Mastanaiah, and G. M. Reddy. 2006. “Influence of Magnetic Arc Oscillation and Current Pulsing on Microstructure and High Temperature Tensile Strength of Alloy 718 TIG Weldments.” Materials Science and Engineering A 428 (1–2): 327–331. doi:10.1016/j.msea.2006.05.046.
   Web of Science ®Google Scholar
• VBC Instrument Engineering, UK. 2001. “HMS InterPulse and Plasma Systems [Online].„ Accessed 15 August 2017. http://www.vbcie.com
   Google Scholar
• Vishwakarma, K. R., N. L. Richards, and M. C. Chaturvedi. 2008. “Microstructural Analysis of Fusion and Heat Affected Zones in Electron Beam Welded ALLVAC® 718PLUS™ Superalloy.” Materials Science and Engineering A 480: 517–528. doi:10.1016/j.msea.2007.08.002.
   Web of Science ®Google Scholar