References
- Acarer, M., B. Gulenc, and F. Findik. 2003. “Investigation of Explosive Welding Parameters and Their Effects on Microhardness and Shear Strength.” Materials & Design 24 (8): 659. doi:10.1016/S0261-3069(03)00066-9.
- ASTM E8M-09. 2009. Standard Test Methods for Tension Testing of Metallic Materials, Pennsylvania (United States). ASTM International. December.
- Azimi, A., S. Tutunchilar, G. Faraji, and M. K. Besharati. 2012. “Mechanical Properties and Microstructural Evolution during Multi-pass ECAR of Al 1100–O Alloy.” Materials & Design 42: 388. doi:10.1016/j.matdes.2012.06.035.
- Cheng, Y. Q., Z. H. Chen, and W. J. Xia. 2007. “Drawability of AZ31 Magnesium Alloy Sheet Produced by Equal Channel Angular Rolling at Room Temperature.” Materials Characterization 58 (7): 617. doi:10.1016/j.matchar.2006.07.007.
- Cheng, Y. Q., Z. H. Chen, W. J. Xia, and T. Zhou. 2007. “Effect of Channel Clearance on Crystal Orientation Development in AZ31 Magnesium Alloy Sheet Produced by Equal Channel Angular Rolling.” Journal of Materials Processing Technology 184 (1–3): 97. doi:10.1016/j.jmatprotec.2006.11.010.
- Chung, Y. H., J. W. Park, and K. H. Lee. 2007. Materials Science Forum: 539-543.
- Crossland, B. 1976. “Review of the Present State-of-the-art in Explosive welding.” Metals Technology 3 (1): 8. doi:10.1179/030716976803391845.
- Durgutlu, A., B. Gulenc, and F. Findik. 2005. “Examination of Copper/stainless Steel Joints Formed by Explosive Welding.” Materials & Design 26 (6): 497. doi:10.1016/j.matdes.2004.07.021.
- Ebrahimi, M., S. A. Nazari Tiji, and F. Djavanroodi. 2015. “Upper Bound Solution of Equal Channel Forward Extrusion Process as a New Severe Plastic Deformation Method.” Metallurgical Research & Technology 112 (6): 609. doi:10.1051/metal/2015044.
- Findik, F. 2011. “Recent Developments in Explosive Welding.” Materials & Design 32 (3): 1081–1093. doi:10.1016/j.matdes.2010.10.017.
- Habibi, A., and M. Ketabchi. 2012. “Enhanced Properties of Nano-grained Pure Copper by Equal Channel Angular Rolling and Post-annealing.” Materials & Design 34: 483. doi:10.1016/j.matdes.2011.07.029.
- Han, J.-H. 2010. “A Comparison of the Effects of Pre-ECAR and Post-ECAR Aging on Microstructure and Strengthening in 7050 Al Alloy Sheet.” Materials Transactions 51 (11): 2109. doi:10.2320/matertrans.M2010236.
- Hansen, N., X. Huang, and D. A. Hughes. 2001. “Microstructural Evolution and Hardening Parameters.” Materials Science and Engineering: A 317 (1–2): 3–11. doi:10.1016/S0921-5093(01)01191-1.
- Hassani, F. Z., and M. Ketabchi. 2011. “Nano Grained AZ31 Alloy Achieved by Equal Channel Angular Rolling Process.” Materials Science and Engineering: A 528 (21): 6426–6431. doi:10.1016/j.msea.2011.05.024.
- Honarpishe, G., and Dehghani. 2015. Journal of Modern Processes in Manufacturing and Production 3 (3): 13-26, Summer.
- Honarpishe, M., Dehghani, M. Dehghani, and E. Haghighat. 2015. “Investigation of Mechanical Properties of Al/Cu Strip Produced by Equal Channel Angular Rolling.” Procedia Materials Science 11: 1–5. doi:10.1016/j.mspro.2015.11.002.
- Honarpisheh, M., J. Niksokhan, and F. Nazari. 2016. “Investigation of the Effects of Cold Rolling on the Mechanical Properties of Explosively-welded Al/St/Al Multilayer Sheet.” Metallurgical Research & Technology 113 (1): 105. doi:10.1051/metal/2015049.
- Iwahashi, Y., Z. Horita, M. Nemoto, and T. G. Langdon. 1998. The process of grain refinementin equal-channel angular pressing ActaMater 46: 3317.
- Kim, W. J., S. J. Yoo, Z. H. Chen, and H. T. Jeong. 2009. “Grain Size and Texture Control of Mg–3Al–1Zn Alloy Sheet Using a Combination of Equal-channel Angular Rolling and High-speed-ratio Differential Speed-rolling Processes.” Scripta Materialia 60 (10): 897. doi:10.1016/j.scriptamat.2009.02.005.
- Kováčik, J., M. Balog, and Š. Emmer. 2014.Electrical conductivity and hardness of Cu-graphite composite after ECAP Kovove Mater 52: 71.
- Kvaˇckaj, T., A. Kovaˇcova, M. Kvacˇkaj, R. Kocˇisˇko, D. Stoyka, and V. Mihalikova. 2012.TEM studies of structure in OFHC copper processed by equal channel angular rolling Micron 43: 720. doi:10.1016/j.micron.2012.01.003
- Kvackaj, T., A. Kovacova, R. Kocisko, J. Bidulska, L. Lityńska–Dobrzyńska, P. Jenei, and J. Gubicza. 2017. “Microstructure Evolution and Mechanical Performance of Copper Processed by Equal Channel Angular Rolling.” Materials Characterization 134: 246–252. doi:10.1016/j.matchar.2017.10.030.
- Lian, J., B. Baudelet, and A. A. Nazarov. 1993. “Model for the Prediction of the Mechanical Behaviour of Nanocrystalline Materials.” Materials Science and Engineering: A 172 (1–2): 23–29. doi:10.1016/0921-5093(93)90422-B.
- Málek, P., and M. Cieslar. 2014.Microstructure and deformation behaviour of the ECAP Al-Mn-Sc-Zr alloy Kovove Mater 52 (6): 329.
- Mamalis, A. G., N. M. Vaxevanidis, A. Szalay, and J. Prohaszka. 1994. “Fabrication of Aluminium/copper Bimetallics by Explosive Cladding and Rolling.” Journal of Materials Processing Technology 44 (1–2): 99–117. doi:10.1016/0924-0136(94)90042-6.
- Nam, C. Y., J. H. Han, Y. H. Chung, and M. C. Shin. 2003. “Effect of Precipitates on Microstructural Evolution of 7050 Al Alloy Sheet during Equal Channel Angular Rolling.” Materials Science and Engineering: A 347 (1–2): 253. doi:10.1016/S0921-5093(02)00597-X.
- Perig, A. V., I. G. Zhbankov, I. A. Matveyev, and V. A. Palamarchuk. 2013.Shape Effect of Angular Die External Wall on Strain Unevenness during Equal Channel Angular Extrusion Materials and Manufacturing Processes 28 (8): 916–922.
- SAA, A.-M., and P. Farhadi Sartangi. 2009. “Experimental Investigation of Explosive Welding of cp-titanium/AISI 304 Stainless Steel.” Materials & Design 30: 459–468. doi:10.1016/j.matdes.2008.06.016.
- SAA, A.-M., A.-H. STS, and A. G. Atkins. 2008. “Bond Strength of Explosively Welded Specimens.” Materials & Design 29: 1334–1352. doi:10.1016/j.matdes.2007.06.010.
- Song, D., T. Zhou, J. Tu, L. Shi, B. Song, L. Hu, M. Yang, Q. Chen, and L. Lu. 2018. “Improved Stretch Formability of AZ31 Sheet via Texture Control by Introducing a Continuous Bending Channel into Equal Channel Angular Rolling.” Journal of Materials Processing Technology 259: 380–386. doi:10.1016/j.jmatprotec.2018.05.012.
- Zhu, M.-L., and F.-Z. Xuan. 2010a. “Effects of Temperature on Tensile and Impact Behavior of Dissimilar Welds of Rotor Steels.” Materials & Design 31 (7): 3346–3352. doi:10.1016/j.matdes.2010.01.055.
- Zhu, M.-L., and F.-Z. Xuan. 2010b. “Correlation between Microstructure, Hardness and Strength in HAZ of Dissimilar Welds of Rotor Steels.” Materials Science and Engineering: A 527 (16–17): 4035–4042. doi:10.1016/j.msea.2010.03.066.