Experimental analysis and optimization of plasma spray parameters on microhardness and wear loss of Mo-Ni-Cr coated super duplex stainless steel

References

• Ahn, J., B. Hwang, and S. Lee. 2005. “Improvement of Wear Resistance of Plasma-sprayed Molybdenum Blend Coatings.” Journal of Thermal Spray Technology 14 (2): 251–257.
   Web of Science ®Google Scholar
• Atlas Steels. 2013. Stainless Steel Grade Datasheets. Melbourne, Australia: Atlas Steels Technical Department.
   Google Scholar
• Azarmi, F., T. W. Coyle, and J. Mostaghimi. 2008. “Optimization of Atmospheric Plasma Spray Process Parameters Using a Design of Experiment for Alloy 625 Coatings.” Journal of Thermal Spray Technology 17 (1): 144–155.
   Web of Science ®Google Scholar
• Babu, P. S., D. Sen, A. Jyothirmayi, L. R. Krishna, and D. S. Rao. 2018. “Influence of Microstructure on the Wear and Corrosion Behavior of Detonation Sprayed Cr2O3-Al2O3 and Plasma Sprayed Cr2O3 Coatings.” Ceramics International 44 (2): 2351–2357.
   Web of Science ®Google Scholar
• Bardi, U., C. Giolli, A. Scrivani, G. Rizzi, F. Borgioli, A. Fossati, K. Partes, T. Seefeld, D. Sporer, and A. Refke. 2008. “Development and Investigation on New Composite and Ceramic Coatings as Possible Abradable Seals.” Journal of Thermal Spray Technology 17 (5–6): 805–811.
   Web of Science ®Google Scholar
• Beardsley, M. B. 1997. “Thick Thermal Barrier Coatings for Diesel Engines.” Journal of Thermal Spray Technology 6 (2): 181–186.
   Web of Science ®Google Scholar
• Cellard, A., V. Garnier, G. Fantozzi, G. Baret, and P. Fort. 2009. “Wear Resistance of Chromium Oxide Nanostructured Coatings.” Ceramics International 35 (2): 913–916.
   Web of Science ®Google Scholar
• Chai, G., and P. Kangasa. 2016. “Super and Hyper Duplex Stainless Steels: Structures, Properties and Applications.” Procedia Structural Integrity 2: 1755–1762.
   Google Scholar
• Datta, S., D. K. Pratihar, and P. P. Bandyopadhyay. 2013. “Modeling of Plasma Spray Coating Process Using Statistical Regression Analysis.” The International Journal of Advanced Manufacturing Technology 65 (5–8): 967–980.
   Web of Science ®Google Scholar
• Davis, J. R., ed. 2004. Handbook of Thermal Spray Technology. Sections Introduction to Applications for Thermal Spray Processing and Selected Applications. Materials Park, OH: ASM International.
   Google Scholar
• Deng, W., S. Li, G. Hou, X. Liu, X. Zhao, Y. An, H. Zhou, and J. Chen. 2017. “Comparative Study on Wear Behavior of Plasma Sprayed Al2O3 Coatings Sliding against Different Counterparts.” Ceramics International 43 (9): 6976–6986.
   Web of Science ®Google Scholar
• Dobrzański, L. A., Z. Brytan, M. A. Grande, M. Rosso, and E. J. Pallavicini. 2005. “Properties of Vacuum Sintered Duplex Stainless Steels.” Journal of Materials Processing Technology 162: 286–292.
   Web of Science ®Google Scholar
• Fauchais, P. L., J. V. Heberlein, and M. I. Boulos. 2014. “Industrial Applications of Thermal Spraying Technology.” In Thermal Spray Fundamentals, 1401–1566. Boston, MA: Springer.
   Google Scholar
• Forghani, S. M., M. J. Ghazali, A. Muchtar, A. R. Daud, N. H. N. Yusoff, and C. H. Azhari. 2013. “Effects of Plasma Spray Parameters on TiO2-coated Mild Steel Using Design of Experiment (Doe) Approach.” Ceramics International 39 (3): 3121–3127.
   Web of Science ®Google Scholar
• Gérard, B. 2006. “Application of Thermal Spraying in the Automobile Industry.” Surface and Coatings Technology 201 (5): 2028–2031.
   Web of Science ®Google Scholar
• Hashemi, S. M., N. Parvin, and Z. Valefi. 2019. “Effect of Microstructure and Mechanical Properties on Wear Behavior of Plasma-sprayed Cr2O3-YSZ-SiC Coatings.” Ceramics International 45 (5): 5284–5296.
   Web of Science ®Google Scholar
• Hyun, P. J., and H. S. Kwon. 2008. “Development of High Mn–N Duplex Stainless Steel for Automobile Structural Components.” Corrosion Science 50 (2): 404–410.
   Web of Science ®Google Scholar
• İşcan, B., and H. Aydın. 2012. “Improving the Usability of Vegetable Oils as a Fuel in a Low Heat Rejection Diesel Engine.” Fuel Processing Technology 98: 59–64.
   Web of Science ®Google Scholar
• Islak, S. S., B. E. Ersöz, N. Orhan, J. Stokes, M. Saleem Hashmı, I. Somunkıran, and N. Tosun. 2013. “Effect on Microstructure of TiO2 Rate in Al2O3-TiO2 Composite Coating Produced Using Plasma Spray Method.” Optoelectronics and Advanced Materials – Rapid Communications 6 (9–10): 844–849.
   Web of Science ®Google Scholar
• Kawakita, J., S. Kuroda, T. Fukushima, and T. Kodama. 2005. “Improvement of Corrosion Resistance of High-velocity Oxyfuel-sprayed Stainless Steel Coatings by Addition of Molybdenum.” Journal of Thermal Spray Technology 14 (2): 224–230.
   Web of Science ®Google Scholar
• Kennedy, D. M., and M. S. J. Hashmi. 1998. “Methods of Wear Testing for Advanced Surface Coatings and Bulk Materials.” Journal of Materials Processing Technology 77 (1–3): 246–253.
   Web of Science ®Google Scholar
• Kola, P. V., S. Daniels, D. C. Cameron, and M. S. J. Hashmi. 1996. “Magnetron Sputtering of TiN Protective Coatings for Medical Applications.” Journal of Materials Processing Technology 56 (1–4): 422–430.
   Web of Science ®Google Scholar
• Langenberg, P., P. Kucharczyk, J. Pilhagen, N. Stranghöner, and E. Schedin. 2019. “Application of the Master Curve Concept on the Choice of Duplex Stainless Steel to Avoid Brittle Fracture.” ce/papers 3 (3–4): 913–918.
   Google Scholar
• Lima, M. M., C. Godoy, P. J. Modenesi, J. C. Avelar-Batista, A. Davison, and A. Matthews. 2004. “Coating Fracture Toughness Determined by Vickers Indentation: An Important Parameter in Cavitation Erosion Resistance of WC–Co Thermally Sprayed Coatings.” Surface and Coatings Technology 177: 489–496.
   Web of Science ®Google Scholar
• Marx, S., A. Paul, A. Köhler, and G. Hüttl. 2006. “Cold Spraying: Innovative Layers for New Applications.” Journal of Thermal Spray Technology 15 (2): 177–183.
   Web of Science ®Google Scholar
• Pakseresht, A. H., E. Ghasali, M. Nejati, K. Shirvanimoghaddam, A. H. Javadi, and R. Teimouri. 2015. “Development Empirical-intelligent Relationship between Plasma Spray Parameters and Coating Performance of Yttria-Stabilized Zirconia.” The International Journal of Advanced Manufacturing Technology 76 (5–8): 1031–1045.
   Web of Science ®Google Scholar
• Parlak, A., H. Yasar, and O. Eldogan. 2005. “The Effect of Thermal Barrier Coating on a Turbo-charged Diesel Engine Performance and Exergy Potential of the Exhaust Gas.” Energy Conversion and Management 46 (3): 489–499.
   Web of Science ®Google Scholar
• Prudenziati, M., G. Cirri, and B. P. Dal. 2006. “Novel High-temperature Reliable Heaters in Plasma Spray Technology.” Journal of Thermal Spray Technology 15 (3): 329–331.
   Web of Science ®Google Scholar
• Prudenziati, M., and M. L. Gualtieri. 2008. “Electrical Properties of Thermally Sprayed Ni-and Ni20Cr-based Resistors.” Journal of Thermal Spray Technology 17 (3): 385–394.
   Web of Science ®Google Scholar
• Rajesh, T. S., and R. V. Rao. 2018. “Experimental Investigation and Parameter Optimization of Al2O3-40% TiO2 Atmospheric Plasma Spray Coating on SS316 Steel Substrate.” Materials Today: Proceedings 5 (2): 5012–5020.
   Google Scholar
• Ramesh, M. R., S. Prakash, S. K. Nath, P. K. Sapra, and N. Krishnamurthy. 2011. “Evaluation of Thermocyclic Oxidation Behavior of HVOF-sprayed NiCrFeSiB Coatings on Boiler Tube Steels.” Journal of Thermal Spray Technology 20 (5): 992–1000.
   Web of Science ®Google Scholar
• Rieger, G., J. Wecker, W. Rodewald, W. Sattler, F. W. Bach, T. Duda, and W. Unterberg. 2000. “Nd–Fe–B Permanent Magnets (Thick Films) Produced by a Vacuum-plasma-spraying Process.” Journal of Applied Physics 87 (9): 5329–5331.
   Web of Science ®Google Scholar
• Sampath, S., and S. F. Wayne. 1994. “Microstructure and Properties of Plasma Sprayed Mo-Mo2C Composites.” Journal of Thermal Spray Technology 3 (3): 282–288.
   Google Scholar
• Santa, J. F., L. A. Espitia, J. A. Blanco, S. A. Romo, and A. Toro. 2009. “Slurry and Cavitation Erosion Resistance of Thermal Spray Coatings.” Wear 267 (1–4): 160–167.
   Web of Science ®Google Scholar
• Seong, B. G., S. Y. Hwang, M. C. Kim, and K. Y. Kim. 2001. “Reaction of WC–Co Coating with Molten Zinc in a Zinc Pot of a Continuous Galvanizing Line.” Surface and Coatings Technology 138 (1): 101–110.
   Web of Science ®Google Scholar
• Shields, J. A. 2013. Applications of Mo Metal and Its Alloys. 2nd ed. London, UK.
   Google Scholar
• Song, J. X., Y. F. Han, S. S. Li, and C. B. Xiao. 2005. “Repair of NiCrAlYSi Overlay Coating on Ni3Al Base Alloy IC6.” Intermetallics 13 (3–4): 351–355.
   Web of Science ®Google Scholar
• Sporer, D., M. Dorfman, L. Xie, A. Refke, I. Giovannetti, and M. Giannozzi. 2007. “Processing and Properties of Advanced Ceramic Abradable Coatings.” In Thermal Spray 2007: Global Coating Solutions, edited by M. R. Marple, M. M. Hyland, Y.-C. Lau, C.-J. Li, R. S. Lima, and G. Montavon, 495–500. Materials Park, OH: ASM International.
   Google Scholar
• Tyagi, A., R. S. Walia, Q. Murtaza, S. M. Pandey, P. K. Tyagi, and B. Bajaj. 2019. “A Critical Review of Diamond like Carbon Coating for Wear Resistance Applications.” International Journal of Refractory Metals and Hard Materials 78: 107–122.
   Web of Science ®Google Scholar
• Vetter, J., G. Barbezat, J. Crummenauer, and J. Avissar. 2005. “Surface Treatment Selections for Automotive Applications.” Surface and Coatings Technology 200 (5–6): 1962–1968.
   Web of Science ®Google Scholar
• Wang, B. 1996. “Erosion-corrosion of Thermal Sprayed Coatings in FBC Boilers.” Wear 199 (1): 24–32.
   Web of Science ®Google Scholar
• Wayne, S. F., S. Sampath, and V. Anand. 1994. “Wear Mechanisms in Thermally-sprayed Mo-based Coatings.” Tribology Transactions 37 (3): 636–640.
   Web of Science ®Google Scholar
• Wu, J., X. Wei, N. P. Padture, P. G. Klemens, M. Gell, E. García, P. Miranzo, and M. I. Osendi. 2002. “Low‐thermal‐conductivity Rare‐earth Zirconates for Potential Thermal‐barrier‐coating Applications.” Journal of the American Ceramic Society 85 (12): 3031–3035.
   Web of Science ®Google Scholar
• Yang, G. J., C. J. Li, S. J. Zhang, and C. X. Li. 2008. “High-temperature Erosion of HVOF Sprayed Cr 3 C 2-NiCr Coating and Mild Steel for Boiler Tubes.” Journal of Thermal Spray Technology 17 (5–6): 782–787.
   Web of Science ®Google Scholar
• Yang, Y., N. Oh, Y. Liu, W. Chen, S. Oh, M. Appleford, S. Kim, et al. 2006. “Enhancing Osseointegration Using Surface-modified Titanium Implants.” JOM 58 (7): 71–76.
   Web of Science ®Google Scholar
• Zeghni, A. E., and M. S. J. Hashmi. 2004. “The Effect of Coating and Nitriding on the Wear Behaviour of Tool Steels.” Journal of Materials Processing Technology 155: 1918–1922.
   Web of Science ®Google Scholar