Effect of friction stir processing and heat treatment on the corrosion properties of AZ31 alloy

References

• Arab, M., and S. P. H. Marashi. 2019. “Effect of Graphene Nanoplatelets (Gnps) Content on Improvement of Mechanical and Tribological Properties of AZ31 Mg Matrix Nanocomposite.” Tribology International 1–10. doi:10.1016/j.triboint.2018.11.023.
   Web of Science ®Google Scholar
• Aung, N. N., and W. Zhou. 2010. “Effect of Grain Size and Twins on Corrosion Behaviour of AZ31B Magnesium Alloy.” Corrosion Science 52 (2): 589–594. doi:10.1016/j.corsci.2009.10.018.
   Web of Science ®Google Scholar
• Azizieh, M., A. H. Kokabi, and P. Abachi. 2011. “Effect of Rotational Speed and Probe Profile on Microstructure and Hardness of AZ31/Al2O3 Nanocomposites Fabricated by Friction Stir Processing.” Materials & Design 32 (4): 2034–2041. doi:10.1016/j.matdes.2010.11.055.
   Web of Science ®Google Scholar
• Babu, J., M. Anjaiah, and A. Mathew. 2018. “Experimental Studies on Friction Stir Processing of AZ31 Magnesium Alloy.” Materials Today: Proceedings 5 (2): 4515–4522. doi:10.1016/j.matpr.2017.12.021.
   Google Scholar
• Balakrishnan, M., I. Dinaharan, R. Palanivel, and R. Sivaprakasam. 2015. “Synthesize of AZ31/TiC Magnesium Matrix Composites Using Friction Stir Processing.” Journal of Magnesium and Alloys 3 (1): 76–78. doi:10.1016/j.jma.2014.12.007.
   Web of Science ®Google Scholar
• Chai, F., D. Zhang, and Y. Li. 2014. “Effect of Thermal History on Microstructures and Mechanical Properties of AZ31 Magnesium Alloy Prepared by Friction Stir Processing.” Materials (Basel). 7 (3): 1573–1589. doi:10.3390/ma7031573.
   PubMed Web of Science ®Google Scholar
• Darras, B. M., M. K. Khraisheh, F. K. Abu-Farha, and M. A. Omar. 2007. “Friction Stir Processing of Commercial AZ31 Magnesium Alloy.” Journal of Materials Processing Technology 191 (1–3): 77–81. doi:10.1016/j.jmatprotec.2007.03.045.
   Web of Science ®Google Scholar
• Dinaharan, I., S. C. Vettivel, M. Balakrishnan, and E. T. Akinlabi. 2019. “Influence of Processing Route on Microstructure and Wear Resistance of Fly Ash Reinforced AZ31 Magnesium Matrix Composites.” Journal of Magnesium and Alloys xxxx: 1–11.
   Google Scholar
• Hassani, B., R. Vallant, F. Karimzadeh, M. H. Enayati, S. Sabooni, and K. Pradeep. 2019. “Effect of Friction Stir Processing on Corrosion Behavior of Cast AZ91C Magnesium Alloy.” Surface Review and Letters 26 (6). doi:10.1142/S0218625X1850213X.
   Web of Science ®Google Scholar
• Kim, J. Y., J. W. Hwang, H. Y. Kim, S. M. Lee, W. S. Jung, and J. W. Byeon. 2017. “Fabrication of AZ31/CNT Surface Nano-Composite by Double-Pass Friction Stir Processing.” Archives of Metallurgy and Materials 62 (2): 1039–1042. doi:10.1515/amm-2017-0149.
   Web of Science ®Google Scholar
• Kumar, N., R. S. Mishra, N. B. Dahotre, R. E. Brennan, K. J. Doherty, and K. C. Cho. 2016. “Effect of Friction Stir Processing on Microstructure and Mechanical Properties of Laser-processed [Formula Presented] Alloy.” Materials & Design 110 (9): 663–675. doi:10.1016/j.matdes.2016.08.039.
   Google Scholar
• Marya, M., L. G. Hector, R. Verma, and W. Tong. 2006. “Microstructural Effects of AZ31 Magnesium Alloy on Its Tensile Deformation and Failure Behaviors.” Materials Science and Engineering A 418 (1–2): 341–356. doi:10.1016/j.msea.2005.12.003.
   Web of Science ®Google Scholar
• Naser, A. Z., and B. M. Darras. 2017. “Experimental Investigation of Mg/SiC Composite Fabrication via Friction Stir Processing.” The International Journal, Advanced Manufacturing Technology 91 (1–4): 781–790. doi:10.1007/s00170-016-9801-z.
   Web of Science ®Google Scholar
• Orozco-Caballero, A., O. A. Ruano, and F. Carreño. 2017. “Influence of Grain Coarsening on the Creep Parameters during the Superplastic Deformation of a Severely Friction Stir Processed Al-Zn-Mg-Cu Alloy.” Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 48 (9): 3980–3984. doi:10.1007/s11661-017-4198-3.
   Google Scholar
• Pérez-Prado, M. T., and O. A. Ruano. 2002. “Texture Evolution during Annealing of Magnesium AZ31 Alloy.” Scripta Materialia 46 (2): 149–155. doi:10.1016/S1359-6462(01)01212-X.
   Web of Science ®Google Scholar
• Prasad, Y. V. R. K., and K. P. Rao. 2009. “Effect of Homogenization on the Hot Deformation Behavior of Cast AZ31 Magnesium Alloy.” Materials & Design 30 (9): 3723–3730. doi:10.1016/j.matdes.2009.02.006.
   Web of Science ®Google Scholar
• Rathee, S., S. Maheshwari, and A. N. Siddiquee. 2018. “Issues and Strategies in Composite Fabrication via Friction Stir Processing: A Review.” Materials and Manufacturing Processes 33 (3): 239–261. doi:10.1080/10426914.2017.1303162.
   Web of Science ®Google Scholar
• Song, G. L., and Z. Q. Xu. 2010. “The Surface, Microstructure and Corrosion of Magnesium Alloy AZ31 Sheet.” Electrochimica acta 55 (13): 4148–4161. doi:10.1016/j.electacta.2010.02.068.
   Web of Science ®Google Scholar
• Vaira Vignesh, R., and R. Padmanaban. 2018, January. “Influence of Friction Stir Processing Parameters on the Wear Resistance of Aluminium Alloy AA5083.” Materials Today: Proceedings 5 (2): 7437–7446. doi:10.1016/j.matpr.2017.11.415.
   Google Scholar
• Vaira Vignesh, R., R. Padmanaban, and M. Govindaraju. 2020. “Synthesis and Characterization of Magnesium Alloy Surface Composite (AZ91D - SiO2) by Friction Stir Processing for Bioimplants.” Silicon 12 (5): 1085–1102. doi:10.1007/s12633-019-00194-6.
   Web of Science ®Google Scholar
• Vignesh, R. V., and R. Padmanaban. 2018, January. “Intergranular Corrosion Susceptibility of Friction Stir Processed Aluminium Alloy 5083.” Materials Today: Proceedings 5 (8): 16443–16452. doi:10.1016/j.matpr.2018.05.143.
   Google Scholar
• Wen, W., W. Kuaishe, G. Qiang, and W. Nan. 2012. “Effect of Friction Stir Processing on Microstructure and Mechanical Properties of Cast AZ31 Magnesium Alloy.” Rare Metal Materials and Engineering] 41 (9): 1522–1526. doi:10.1016/S1875-5372(13)60004-1.
   Web of Science ®Google Scholar
• Yu, H., H. Zhou, Y. Sun, L. Ren, Z. Wan, and L. Hu. 2018. “Microstructures and Mechanical Properties of Ultrafine-grained Ti/AZ31 Magnesium Matrix Composite Prepared by Powder Metallurgy.” Advanced Powder Technology 29 (12): 3241–3249. doi:10.1016/j.apt.2018.09.001.
   Web of Science ®Google Scholar
• Zang, Q. H., H. M. Chen, F. Y. Lan, J. Zhang, and Y. X. Jin. 2017. “Effect of Friction Stir Processing on Microstructure and Damping Capacity of AZ31 Alloy.” Journal of Central South University 24 (5): 1034–1039. doi:10.1007/s11771-017-3506-9.
   Web of Science ®Google Scholar
• Zhao, Z. Y., F. R. Cao, and R. G. Guan. 2011. “Effect of Heat Treatment on the Microstructures and Mechanical Properties in AZ31 Magnesium Alloy Processed by Continuous Rheo-Extrusion.” Advanced Materials Research 189–193: 4221–4226. doi:10.4028/scientific.net/AMR.189-193.4221.
   Google Scholar