Effect of mounting bracket structure and material on automotive air conditioning compressor

References

• Allam, E. 2009. “Noise Characteristics Determination of Vehicle Air-Condition Compressor.” SAE Technical Papers.
   Google Scholar
• Amin, A. 2016. “Latest Practical Notes and Recent Lessons Learned on Reciprocating Compressors.” Australian Journal of Mechanical Engineering 14 (2): 138–150. doi:10.1080/14484846.2015.1093681.
   Web of Science ®Google Scholar
• Barbosa, R. F., T. S. Sampaio, and E. C. Rodrigues. 2008. “Topologic Optimization Applied to an Auxiliary Organs Bracket of an Automotive Engine.” SAE Technical Paper.
   Google Scholar
• Bhat, P. H. 2013. “Dynamic Analysis of Compressor Mounting Bracket of Automobile Air Condition System.” Thapar University.
   Google Scholar
• Bhat, P. H., S. S. Sarawade, and S. H. Gawande. 2018. “Dynamic Analysis of Compressor Mounting Bracket in Automobiles.” International Review of Mechanical Engineering 12 (1): 55–59.
   Google Scholar
• Chang, J. W., and Y. S. Lee. 2008. “Topology Optimization of Compressor Bracket.” Journal of Mechanical Science & Technology 22 (9): 1668–1676. doi:10.1007/s12206-008-0428-3.
   Web of Science ®Google Scholar
• Cheng, Z., and Y. Lu. 2018. “Diagnosis and Analysis of Abnormal Noise in the Pure Electric Vehicle’s Air Condition Compressor at Idle.” Journal of Low Frequency Noise Vibration and Active Control 37 (4): 711–724. doi:10.1177/1461348418765950.
   Web of Science ®Google Scholar
• Cho, D. S., and S. Mun. 2008. “Determination of the Sound Power Levels Emitted by Various Vehicles Using a Novel Testing Method.” Applied Acoustics 69 (3): 185–195. doi:10.1016/j.apacoust.2006.08.012.
   Web of Science ®Google Scholar
• Cho, J. R., and S. J. Moon. 2005. “A Numerical Analysis of the Interaction between the Piston Oil Film and the Component Deformation in A Reciprocating Compressor.” Tribology International 38 (5): 459–468. doi:10.1016/j.triboint.2004.10.002.
   Web of Science ®Google Scholar
• GB/T 18697. 2002. “Acoustics — Measurement of Noise inside Motor Vehicles.”
   Google Scholar
• Han, H. S., W. B. Jeong, and M. S. Kim. 2011. “Frequency Characteristics of the Noise of R600a Refrigerant Flowing in a Pipe with Intermittent Flow Pattern.” International Journal of Refrigeration 34 (6): 1497–1506. doi:10.1016/j.ijrefrig.2011.04.004.
   Web of Science ®Google Scholar
• He, G. L., K. Ding, W. H. Li, and Y. Z. Li. 2017. “Frequency Response Model and Mechanism for Wind Turbine Planetary Gear Train Vibration Analysis.” IET Renewable Power Generation 11 (4): 425–432.
   Web of Science ®Google Scholar
• Huang, B. X., J. Ye, S. S. Xiong, B. T. Mao, Y. H. Wang, B. S. Guo, Y. B. Sun, and Y. F. Zhang. 2015. “Automotive Air Conditioning Compressor Noise Source Identification Method.” Applied Mechanics and Materials 741: 397–400. d o i:1 0.4028/w w w.scientific.net/AMM.741.397.
   Google Scholar
• ISO 5128. 1980. “Acoustics — Measurement of Noise inside Motor Vehicles.”
   Google Scholar
• ISO/IEC GUIDE 98-3-2008. “Uncertainty of Measurement —part 3: Guide to the Expression of Uncertainty in Measurement.”
   Google Scholar
• Jeon, T. R., J. S. Koo, and K. W. Rim. 2008. “Robust Design of Air Compressor Bracket by Using MSM Fatigue Analysis.” Advanced Technology and New Trend for Vehicle Body Structure Engineering II 19:23-26.
   Google Scholar
• Jung, J., J. Hyun, S. Goo, and S. Wang. 2015. “An Efficient Design Sensitivity Analysis Using Element Energies for Topology Optimization of a Frequency Response Problem.” Computer Methods in Applied Mechanics and Engineering 296: 196–210. doi:10.1016/j.cma.2015.06.019.
   Web of Science ®Google Scholar
• Kalsi, S., D. Singh, and J. S. Saini. 2018. “Optimization of Compressor Mounting Bracket of a Passenger Car.” Journal of the Institution of Engineers (India): Series C 100 (4): 675–691. doi:10.1007/s40032-018-0453-7.
   Google Scholar
• Kidd, B. J. G. 2000. “Topology Optimization Used to Achieve Frequency Targets of an Engine Bracket.” In The 2nd Altair Technology Conference,Towcester Racecourse,UK.
   Google Scholar
• Kim, Y. S., H. Y. Kim, S. Y. Hwang, and Y. M. Kim. 2016. “A Study on Development of Pre-heat Treated Steel Head Bolt for Swashplate Type Compressor of Car Air-conditioner.” Transactions of the Korean Society of Automotive Engineers 24 (5): 588–595. doi:10.7467/KSAE.2016.24.5.588.
   Google Scholar
• Kim, Y. T., Y. B. Lee, M. J. Jho, and S. J. Suh. 2004. “A Theoretical Model for the Evaluation of Measurement Uncertainty of A Sound Level Meter Calibration by Comparison Method in an Anechoic Room.” Applied Acoustics 65 (10): 967–984.
   Web of Science ®Google Scholar
• Kong, K. S. 2013. “Improve Stiffness of a Compressor Bracket Due to Tightening Bolt Failure.” In 2013 Malaysia Altair Technology Conference，Kuala Lumpur,Malaysia.
   Google Scholar
• Koo, J. S., J. S. Choi, and T. R. Jeon. 2005. “Vibration Fatigue Analysis of Automotive Bracket.” In JASE Annual Congress,Yokohama, Japan.
   Google Scholar
• Lee, D., J. Chang, and C. Kim. 2003. “Optimal Shape Design of an Air-Conditioner Compressor-Mounting Bracket in a Passenger Car.” SAE Technical Paper.
   Google Scholar
• Martini, J., and S. Cucuz. 2002. “Sound Power Determination of Automotive A/C-Compressors.” SAE Technical Paper 2002-01-1232.
   Google Scholar
• Miyagawa, K., and H. Kayukawa. 1997. “Development of the Swash Plate Type Continuously Variable Displacement Compressor (7SB16).” Jsae Review 18 (2): 193–193(1).
   Google Scholar
• Norton, M. P., and F. C. Nelson. 1989. “Fundamentals of Noise and Vibration Analysis for Engineers.” Journal of the Acoustical Society of America 88 (4): 2044. doi:10.1121/1.400194.
   Google Scholar
• NTP. 2014. “China Automotive Air-conditioning Compressor Industry Report, 2014-2017.” Research in China.
   Google Scholar
• Oka, H., Y. Tabuchi, and H. Yazawa. 2002. “Development of Plastic Pulley for Automotive Air Conditioner Compressor.” SAE Technical Paper.
   Google Scholar
• Park, C. S., S. H. Kim, G. G. Park, and J. K. Seok. 2012. “Active Mechanical Vibration Control of Rotary Compressors for Air-conditioning Systems.” Journal of Power Electronics 12: 1003–1010. doi:10.6113/JPE.2012.12.6.1003.
   Web of Science ®Google Scholar
• Rainer, M. P. 2007. “Significant Weight Reduction by Using Topology Optimization in Volkswagen Design Development.” In European Hyperworks Technology Conference. Berlin, Germany.
   Google Scholar
• Shi, W. K., Q. H. Zu, Z. Y. Chen, Y. Mao, B. Y. He, J. Y. Fu, and X. Y. Li. 2016. “Noise Diagnosis of in Idle Automotive Air Conditioning Compressor and Topology Optimization.” Journal of Jilin University (Engineering and Technology Edition) 46 (3): 725–731.
   Google Scholar
• Wang, X. T., G. Y. Zhao, and C. Y. Tang. 2010. “Notice of Retraction Analysis of Frequency Response and Fatigue of Car Body by Random Loading.” IEEE International Conference on Computer Science and Information Technology 2: 530–534.
   Google Scholar
• Wu, J., J. Lin, Z. Zhang, Z. Chen, J. Xie, and J. Lu. 2016. “Experimental Investigation on Cold Startup Characteristics of a Rotary Compressor in the R290 Air-conditioning System under Cooling Condition.” International Journal of Refrigeration 65: 209–217. doi:10.1016/j.ijrefrig.2015.11.009.
   Web of Science ®Google Scholar
• Yoshitaka, T., I. Naotaka, T. Kenichi, and S. Hirofumi. 2005. “A Study on the Relationship between Subjective Unpleasantness and Body Surface Vibrations Induced by High-level Low-frequency Pure Tones.” Industrial Health 43 (3): 580–587. doi:10.2486/indhealth.43.580.
   PubMed Web of Science ®Google Scholar
• Yu, M., L. L. Zhang, Y. Li, X. G. Yan, and J. Du. 2012. “Study on Vibration Modes and Acoustic Radiation Modes for Air Conditioning Compressor.” Applied Mechanics & Materials 141: 64–68. d o i:1 0.4028/w w w.scientific.net/AMM.141.64.
   Google Scholar
• Zhang, C. B., and C. Q. Xue. 2006. “Analysis of Engine Vibration and Its Measurement Method.” Electro-Mechanical Engineering 1: 1–3.
   Google Scholar
• Zhao, R., W. Li, and W. Zhuge. 2020. “Unsteady Characteristic and Flow Mechanism of a Scroll Compressor with Novel Discharge Port for Electric Vehicle Air Conditioning.” International Journal of Refrigeration 118: 403–414. doi:10.1016/j.ijrefrig.2020.06.022.
   Google Scholar