An integrated module for predictive modelling and machinability appraisal during milling of modified graphene/epoxy nanocomposites

References

• Babu, N. S. M., N. R. Mathivanan, and K. V. Kumar. 2019. “Influence of Machining Parameters on the Response Variable during Drilling of the Hybrid Laminate.” Australian Journal of Mechanical Engineering 1–10. doi:10.1080/14484846.2019.1704492.
   Web of Science ®Google Scholar
• Bagada, C., H. Damor, V. Prajapati, and K. Abhishek. 2020. “Utility Function Approach Integrated with Fuzzy for Optimization in Milling Glass Fiber Reinforced Epoxy Composites.” Recent Advances in Mechanical Infrastructure, Lecture Notes in Intelligent Transportation and Infrastructure 184: 1643–1650.
   Google Scholar
• Bejaxhin, A. B. H., and G. Paulraj. 2019. “Experimental Investigation of Vibration Intensities of CNC Machining Centre by Microphone Signals with the Effect of TiN/epoxy Coated Tool Holder.” Journal of Mechanical Science and Technology 33 (3): 1321–1331. doi:10.1007/s12206-018-1232-3.
   Web of Science ®Google Scholar
• Bhattacharya, A., S. Das, P. Majumder, and A. Batish. 2009. “Estimating the Effect of Cutting Parameters on Surface Finish and Power Consumption during High Speed Machining of AISI 1045 Steel Using Taguchi Design and ANOVA.” Production Engineering 3 (1): 31–40. doi:10.1007/s11740-008-0132-2.
   Google Scholar
• Bhopale, N. N., R. S. Pawade, and S. S. Joshi. 2017. “Surface Quality Analysis in Ball End Milling of Inconel 718 Cantilevers by Response Surface Methodology.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231 (4): 628–640. doi:10.1177/0954405415600140.
   Web of Science ®Google Scholar
• Chakladar, N. D., and S. Chakraborty. 2008. “A Combined TOPSIS-AHP-method-based Approach for Non-traditional Machining Processes Selection.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 222 (12): 1613–1623. doi:10.1243/09544054JEM1238.
   Web of Science ®Google Scholar
• Chiu, S.-H., S.-Y. Gan, Y.-C. Tseng, K.-T. Chen, -C.-C. Chen, C.-H. Su, and S.-H. Pong. 2017. “Multi-objective Optimization of Process Parameters in an Area-forming Rapid Prototyping System Using the Taguchi Method and a Grey Relational Analysis.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231 (12): 2211–2222. doi:10.1177/0954405415623479.
   Web of Science ®Google Scholar
• Feng, Y., H. Chen, X. Dong, J. Qu, H. He, B. Xu, and Y. Zhang. 2016. “Polyvinyl Alcohol-Modified Pithecellobium Clypearia Benth Herbal Residue Fiber/Polypropylene Composites.” Polymers and Polymer Composites 16 (2): 101–113. doi:10.1002/pc.
   Google Scholar
• Geier, N., and T. Szalay. 2017. “Optimisation of Process Parameters for the Orbital and Conventional Drilling of Uni-directional Carbon Fibre-reinforced Polymers (UD-CFRP).” Measurement: Journal of the International Measurement Confederation 110: 319–334. doi:10.1016/j.measurement.2017.07.007.
   Web of Science ®Google Scholar
• Gemi, L., S. Morkavuk, U. Köklü, and D. S. Gemi. 2019. “An Experimental Study on the Effects of Various Drill Types on Drilling Performance of GFRP Composite Pipes and Damage Formation.” Composites Part B: Engineering 172: 186–194. doi:10.1016/j.compositesb.2019.05.023.
   Web of Science ®Google Scholar
• Gong, Y., and P. Li. 2019. “Analysis of Tool Wear Performance and Surface Quality in Post Milling of Additive Manufactured 316L Stainless Steel.” Journal of Mechanical Science and Technology 33 (5): 2387–2395. doi:10.1007/s12206-019-0237-x.
   Web of Science ®Google Scholar
• Gopal, P. M., and K. S. Prakash. 2017. “Minimization of Cutting Force, Temperature and Surface Roughness through GRA, TOPSIS and Taguchi Techniques in End Milling of Mg Hybrid MMC.” Measurement 116: 178–192. doi:10.1016/j.measurement.2017.11.011.
   Web of Science ®Google Scholar
• Haiyan, W., Q. Xuda, L. Hao, and R. Chengzu. 2013. “Analysis of Cutting Forces in Helical Milling of Carbon Fiber-reinforced Plastics.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 227 (1): 62–74. doi:10.1177/0954405412464328.
   Google Scholar
• Hanemann, T., and D. V. Szabó. 2010. “Polymer-nanoparticle Composites: From Synthesis to Modern Applications.” Materials 3 (6): 3468–3517. doi:10.3390/ma3063468.
   Web of Science ®Google Scholar
• Heidary, H., N. Z. Karimi, and G. Minak. 2018. “Investigation on Delamination and Flexural Properties in Drilling of Carbon Nanotube/polymer Composites.” Composite Structures 201(November 2017): 112–120. doi:10.1016/j.compstruct.2018.06.041.
   Web of Science ®Google Scholar
• Huang, H. 2016. “A Study of High-Speed Milling Characteristics of Nitinol A Study of High-Speed Milling Characteristics of Nitinol.” Materials and Manufacturing Processes 6914 (June): 159–175. doi:10.1081/AMP-120029849.
   Google Scholar
• Hwang, C.-L., and K. Yoon. 1981. “Multiple Objective Decision Making - Methods and Applications.” Lecture Notes in Economics and Mathematical Systems 186 (164): 58–191. doi:10.1007/978-3-642-45511-7.
   Google Scholar
• Jenarthanan, M. P., and R. Jeyapaul. 2018. “Optimisation of Machining Parameters on Milling of GFRP Composites by Desirability Function Analysis Using Taguchi Method.” International Journal of Engineering, Science and Technology 5 (4): 22. doi:10.4314/ijest.v5i4.3.
   Google Scholar
• Kalidass, S., and P. Palanisamy. 2014. “Experimental Investigation on the Effect of Tool Geometry and Cutting Conditions Using Tool Wear Prediction Model for End Milling Process.” Journal of Advanced Manufacturing Systems 13 (1): 41–54. doi:10.1142/S0219686714500036.
   Google Scholar
• Karpat, Y., and N. Polat. 2013. “Mechanistic Force Modeling for Milling of Carbon Fiber Reinforced Polymers with Double Helix Tools.” CIRP Annals - Manufacturing Technology 62 (1): 95–98. doi:10.1016/j.cirp.2013.03.105.
   Web of Science ®Google Scholar
• Kaushik, N., and S. Singhal. 2018. “Hybrid Combination of Taguchi-GRA-PCA for Optimization of Wear Behavior in AA6063/SiCp Matrix Composite.” Production and Manufacturing Research 6 (1): 171–189. doi:10.1080/21693277.2018.1479666.
   Web of Science ®Google Scholar
• Khashaba, U. A., and A. A. El-Keran. 2017. “Drilling Analysis of Thin Woven Glass-fiber Reinforced Epoxy‎ Composites.” Journal of Materials Processing Technology 249: 415–425. doi:10.1016/j.jmatprotec.2017.06.011.
   Web of Science ®Google Scholar
• Kim, H. R., and K. Y. Lee. 2008. “Using the Orthogonal Array with Grey Relational Analysis to Optimize the Laser Hybrid Welding of a 6061-T6 Al Alloy Sheet.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 222 (8): 981–987. doi:10.1243/09544054JEM1070.
   Web of Science ®Google Scholar
• Komanduri, R. 1997. “Machining of Fiber-reinforced Composites.” Machining Science and Technology 1 (1): 113–152. doi:10.1080/10940349708945641.
   Web of Science ®Google Scholar
• Kulkarni, G. S., G. S. Shivashankar, R. Suresh, and N. G. Siddeshkumar. 2019. “Optimization of Drilling Parameters of GFRP with Liquid Silicone Rubber and Fine Silica Powder by Taguchi Approach.” Silicon 35: 1–16. doi:10.1007/s12633-019-00260-z.
   Google Scholar
• Kumar, D., and K. K. Singh. 2019. “Investigation of Delamination and Surface Quality of Machined Holes in Drilling of Multiwalled Carbon Nanotube Doped Epoxy/carbon Fiber Reinforced Polymer Nanocomposite.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 233 (4): 647–663. doi:10.1177/1464420717692369.
   Web of Science ®Google Scholar
• Kumar, D. R., N. Jeyaprakash, C. Yang, and K. R. Ramkumar. 2020. “Investigation on Drilling Behavior of CFRP Composites Using Optimization Technique.” Arabian Journal for Science and Engineering 0123456789. doi:10.1007/s13369-020-04649-6.
   Web of Science ®Google Scholar
• Kumar, R., M. K. Pradhan, and R. Kumar (2014). “Modeling and Optimization of End Milling Parameters on Aluminum 6061 Alloy Using GRA Based Taguchi Method Coupled with PCA.” Proceedings of the 5th International Conference on Manufacturing Technology, Design and Research, IIT Guwahati, (Aimtdr), 10–15. 10.13140/2.1.4297.6324.
   Google Scholar
• Li, W., A. Dichiara, and J. Bai. 2013. “Carbon Nanotube-graphene Nanoplatelet Hybrids as High-performance Multifunctional Reinforcements in Epoxy Composites.” Composites Science and Technology 74: 221–227. doi:10.1016/j.compscitech.2012.11.015.
   Web of Science ®Google Scholar
• Lin, T. R. 2002. “Optimisation Technique for Face Milling Stainless Steel with Multiple Performance Characteristics.” International Journal of Advanced Manufacturing Technology 19 (5): 330–335. doi:10.1007/s001700200021.
   Web of Science ®Google Scholar
• Linbo, Z., W. Lijiang, and W. Xin. 2003. “Study on Vibration Drilling of Fiber Reinforced Plastics with Hybrid Variation Parameters Method.” Composites: Part A 34 (3): 237–244. doi:10.1016/S1359-835X(02)00207-5.
   Web of Science ®Google Scholar
• Mohammed, A., N. T. K. Al-Saadi, and R. Al-Mahaidi. 2018. “Assessing the Contribution of the CFRP Strip of Bearing the Applied Load Using Near-surface Mounted Strengthening Technique with Innovative High-strength Self-compacting Cementitious Adhesive (IHSSC-CA).” Polymers 10 (1): 1. doi:10.3390/polym10010066.
   Web of Science ®Google Scholar
• Myagkov, L. L., K. Mahkamov, N. D. Chainov, and I. Makhkamova (2014). “Advanced and Conventional Internal Combustion Engine Materials. Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance: Towards Zero Carbon Transportation” https://doi.org/10.1533/9780857097422.2.370
   Google Scholar
• Nguyen, T. T., M. Mia, X. P. Dang, C. H. Le, and M. S. Packianather. 2020. “Green Machining for the Dry Milling Process of Stainless Steel 304.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234 (5): 881–899. doi:10.1177/0954405419888126.
   Web of Science ®Google Scholar
• Ning, H., J. Li, and N. Hu. 2015. “Interlaminar Mechanical Properties of Carbon Fiber Reinforced Plastic Laminates Modified with Graphene Oxide Interleaf.” CARBON 91: 224–233. doi:10.1016/j.carbon.2015.04.054.
   Web of Science ®Google Scholar
• Nonobe, Y. 2017. “Development of the Fuel Cell Vehicle Mirai.” IEEJ Transactions on Electrical and Electronic Engineering 12 (1): 5–9. doi:10.1002/tee.22328.
   Web of Science ®Google Scholar
• Pagar, N. D., and S. H. Gawande. 2020. “Multi-response Design Optimisation of Convolution Stresses of Metal Bellows Using Integrated PCA-GRA Approach.” Australian Journal of Mechanical Engineering 1–21. doi:10.1080/14484846.2020.1725347.
   Web of Science ®Google Scholar
• Palanikumar, K. 2011. “Experimental Investigation and Optimisation in Drilling of GFRP Composites.” Measurement: Journal of the International Measurement Confederation 44 (10): 2138–2148. doi:10.1016/j.measurement.2011.07.023.
   Web of Science ®Google Scholar
• Panchagnula, K. K., and P. Kuppan. 2019. “Improvement in the Mechanical Properties of Neat GFRPs with Multi-walled CNTs.” Journal of Materials Research and Technology 8 (1): 366–376. doi:10.1016/j.jmrt.2018.02.009.
   Google Scholar
• Patel, K., A. Batish, and A. Bhattacharya. 2009. “Optimization of Surface Roughness in an End-milling Operation Using Nested Experimental Design.” Production Engineering 3 (4–5): 361–373. doi:10.1007/s11740-009-0177-x.
   Google Scholar
• Prasad, A. V. S. R., K. Ramji, M. Kolli, and G. V. Krishna. 2019. “Multi-Response Optimization of Machining Process Parameters for Wire Electrical Discharge Machining of Lead-Induced Ti-6Al-4V Alloy Using AHP-TOPSIS Method.” Journal of Advanced Manufacturing Systems 18 (2): 213–236. doi:10.1142/S0219686719500112.
   Web of Science ®Google Scholar
• Premnath, A., T. Alwarsamy, and K. Sugapriya. 2014. “A Comparative Analysis of Tool Wear Prediction Using Response Surface Methodology and Artificial Neural Networks.” Australian Journal of Mechanical Engineering 12 (1): 38–48. doi:10.7158/M12-075.2014.12.1.
   Google Scholar
• Rajesh Mathivanan, N., B. S. Mahesh, and H. Anup Shetty. 2016. “An Experimental Investigation on the Process Parameters Influencing Machining Forces during Milling of Carbon and Glass Fiber Laminates.” Measurement: Journal of the International Measurement Confederation 91: 39–45. doi:10.1016/j.measurement.2016.04.077.
   Web of Science ®Google Scholar
• Ramkumar, J., S. K. Malhotra, and R. Krishnamurthy. 2004. “Effect of Workpiece Vibration on Drilling of GFRP Laminates.” Journal of Materials Processing Technology 152 (3): 329–332. doi:10.1016/S0924-0136(03)00622-8.
   Web of Science ®Google Scholar
• Ray, D., A. B. Puri, and Nagahanumaiah. 2019. “Investigation on Cutting Forces and Surface Finish in Mechanical Micro Milling of Zr-Based Bulk Metallic Glass.” Journal of Advanced Manufacturing Systems 18 (1): 113–132. doi:10.1142/S0219686719500069.
   Web of Science ®Google Scholar
• Sehgal, A. K., and Meenu. 2018. “Grey Relational Analysis Coupled with Principal Component Analysis to Optimize the Machining Process of Ductile Iron.” Materials Today: Proceedings 5 (1): 1518–1529. doi:10.1016/j.matpr.2017.11.241.
   Google Scholar
• Singh, A., S. Datta, and S. S. Mahapatra. 2013. “Application of a Fuzzy Inference System for the Optimization of Material Removal Rate and Multiple Surface Roughness Characteristics in the Machining of GFRP Polyester Composites.” Decision Making in Manufacturing and Services 7 (1–2): 19. doi:10.7494/dmms.2013.7.1.19.
   Google Scholar
• Siwal, S. S., Q. Zhang, N. Devi, and V. K. Thakur. 2020. “Carbon-based Polymer Nanocomposite for High-performance Energy Storage Applications.” Polymers 12 (3): 1–31. doi:10.3390/polym12030505.
   Web of Science ®Google Scholar
• Sorrentino, L., S. Turchetta, and C. Bellini. 2017. “Analysis of Carbon Fibre Reinforced Polymers Milling by Diamond Electroplated Tool.” Diamond and Related Materials 76 (2016): 184–190. doi:10.1016/j.diamond.2017.05.005.
   Google Scholar
• Sourd, X., R. Zitoune, L. Crouzeix, M. Salem, and M. Charlas. 2020. “New Model for the Prediction of the Machining Depth during Milling of 3D Woven Composite Using Abrasive Waterjet Process.” Composite Structures 234: 111760. doi:10.1016/j.compstruct.2019.111760.
   Web of Science ®Google Scholar
• Srinivasan, L., K. Mohammad Chand, D. B. Kannan, T. Sathiya, and S. Biju. 2018. “Application of GRA and TOPSIS Optimization Techniques in GTA Welding of 15CDV6 Aerospace Material.” Transactions of the Indian Institute of Metals 71 (2): 373–382. doi:10.1007/s12666-017-1166-y.
   Web of Science ®Google Scholar
• Tsao, C. C. 2009. “Grey-Taguchi Method to Optimize the Milling Parameters of Aluminum Alloy.” International Journal of Advanced Manufacturing Technology 40 (1–2): 41–48. doi:10.1007/s00170-007-1314-3.
   Web of Science ®Google Scholar
• Voss, R., L. Seeholzer, F. Kuster, and K. Wegener. 2017. “Influence of Fibre Orientation, Tool Geometry and Process Parameters on Surface Quality in Milling of CFRP.” CIRP Journal of Manufacturing Science and Technology 18: 75–91. doi:10.1016/j.cirpj.2016.10.002.
   Web of Science ®Google Scholar
• Wang, G., W.-L. Li, F. Rao, Z.-R. He, and Z.-P. Yin. 2019. “Multi-parameter Optimization of Machining Impeller Surface Based on the On-machine Measuring Technique.” Chinese Journal of Aeronautics 32 (8): 2000–2008. doi:10.1016/j.cja.2018.09.005.
   Web of Science ®Google Scholar
• Wang, X., L. J. Wang, and J. P. Tao. 2004. “Investigation on Thrust in Vibration Drilling of Fiber-reinforced Plastics.” Journal of Materials Processing Technology 148 (2): 239–244. doi:10.1016/j.jmatprotec.2003.12.019.
   Web of Science ®Google Scholar
• Wu, C., Z. Chen, F. Wang, Y. Hu, E. Wang, Z. Rao, and X. Zhang. 2019. “Mechanical and Drilling Properties of Graphene Oxide Modified Urea-melamine-phenol Formaldehyde Composites Reinforced by Glass Fiber.” Composites Part B: Engineering 162(August 2018): 378–387. doi:10.1016/j.compositesb.2018.12.079.
   Web of Science ®Google Scholar
• Xu, J., C. Li, M. Chen, M. M. El, and J. P. Davim. 2019. “On the Analysis of Temperatures, Surface Morphologies and Tool Wear in Drilling CFRP/Ti6Al4V Stacks under Different Cutting Sequence Strategies.” Composite Structures 222: 111708. doi:10.1016/j.compstruct.2019.111708.
   Google Scholar
• Xu, J., and M. E. Mansori. 2016. “Experimental Study on Drilling Mechanisms and Strategies of Hybrid CFRP/Ti Stacks.” Composite Structures 157: 461–482. doi:10.1016/j.compstruct.2016.07.025. July.
   Web of Science ®Google Scholar
• Yadav, S., V. K. Pathak, and S. Gangwar. 2019. “A Novel Hybrid TOPSIS-PSI Approach for Material Selection in Marine Applications.” Sadhana - Academy Proceedings in Engineering Sciences 44 (3): 1–12. doi:10.1007/s12046-018-1020-x.
   Web of Science ®Google Scholar
• Zhang, R. L., B. Gao, W. T. Du, J. Zhang, H. Z. Cui, L. Liu, … F. H. Li. 2016. “Enhanced Mechanical Properties of Multiscale Carbon Fiber/epoxy Composites by Fiber Surface Treatment with Graphene Oxide/polyhedral Oligomeric Silsesquioxane.” Composites. Part A, Applied Science and Manufacturing 84: 455–463. doi:10.1016/j.compositesa.2016.02.021.
   Web of Science ®Google Scholar
• Zhao, Y.-H., Y.-F. Zhang, S.-L. Bai, and X.-W. Yuan. 2016. “Carbon Fibre/graphene Foam/polymer Composites with Enhanced Mechanical and Thermal Properties.” Composites Part B: Engineering 94: 102–108. doi:10.1016/j.compositesb.2016.03.056.
   Web of Science ®Google Scholar