195
Views
1
CrossRef citations to date
0
Altmetric
Research Article

Effect of zirconium oxide particulate composites with Al-Si on the microstructural and mechanical properties of hot pressed, spray forming and stir casting methods

, , , &
Pages 756-774 | Received 13 Dec 2020, Accepted 02 Apr 2021, Published online: 17 Jun 2021

References

  • Abdizadeh, H., and M. A. Baghchesara. 2013. “Investigation on Mechanical Properties and Fracture Behavior of A356 Aluminum Alloy Based ZrO2 Particle Reinforced Metal-matrix Composites.” Ceramics International 39 (2) (March): 2045–2050. doi:10.1016/j.ceramint.2012.08.057.
  • Bayoumi, M. A., and M. Surey, “Casting of SiC Reinforced Metal Matrix Composites,” Proc. Int. Symp. (S. G. Fishman and A. K. Dhingra, eds.), Mater. Park. OH ASM Int. Publ., pp. 167–172, 1988.
  • Bharath, V., M. Nagaral, V. Auradi, and S. A. Kori. 2014. “Preparation of 6061Al-Al 2 O 3 MMC’s by Stir Casting and Evaluation of Mechanical and Wear Properties.” Procedia Materials Science 6: 1658–1667. doi:10.1016/j.mspro.2014.07.151. January.
  • Daoud, A., and M. Abo-Elkhar. 2002. “Influence of Al2O3 or ZrO2 Particulate Addition on the Microstructure Aspects of AlNi and AlSi Alloys.” Journal of Materials Processing Technology 120 (1–3) (January): 296–302. doi:10.1016/S0924-0136(01)01067-6.
  • Daoud, A., M. T. Abou-Elkhair, and P. Rohatgi. 2004. “Wear and Friction Behavior of near Eutectic Al-Si+ZrO2 or WC Particle Composites.” Composites Science and Technology 64 (7–8) (June): 1029–1040. doi:10.1016/j.compscitech.2003.09.020.
  • Elmadagli, M., T. Perry, and A. T. Alpas. 2007. “A Parametric Study of the Relationship between Microstructure and Wear Resistance of Al-Si Alloys.” Wear 262 (1–2) (January): 79–92. doi:10.1016/j.wear.2006.03.043.
  • Goudar, D. M., K. Raju, V. C. Srivastava, and G. B. Rudrakshi. 2013. “Effect of Secondary Processing on the Microstructure and Wear Behavior of Spray Formed Al-30Mg2Si-2Cu Alloy.” Materials & Design 47: 489–496. doi:10.1016/j.matdes.2012.11.010. May.
  • Govindan, K., and G. Jinu. 2015. “EXPERIMENTAL INVESTIGATION ON MECHANICAL AND WEAR BEHAVIOUR OF ALUMINIUM LM6/Zro2 COMPOSITES FABRICATED BY STIR CASTING METHOD.” J. Balk. Tribol. Assoc 21 (Jan): 539–556.
  • Grant, P. S., B. Cantor, S. Rogers, and L. Katgerman. 1991. “A Computer Model for Droplet and Particle Trajectories and Thermal Profiles in Spray Forming.” Cast Metals 3 (4): 227–293. doi:10.1080/09534962.1990.11819044.
  • Guan, L. N., L. Geng, H. W. Zhang, and L. J. Huang. 2011. “Effects of Stirring Parameters on Microstructure and Tensile Properties of (Abow+sicp)/6061al Composites Fabricated by Semi-solid Stirring Technique.” Transactions of Nonferrous Metals Society of China 21 (SUPPL. 2) (August): s274–s279. doi:10.1016/S1003-6326(11)61590-2.
  • Guiglionda, G., and W. J. Poole. 2002. “The Role of Damage on the Deformation and Fracture of Al-Si Eutectic Alloys.” Mater. Sci. Eng. A 336 (1–2) (October): 159–169. doi:10.1016/S0921-5093(01)01971-2.
  • Hashim, J., L. Looney, and M. S. J. Hashmi. 1999. “Metal Matrix Composites: Production by the Stir Casting Method.” Journal of Materials Processing Technology 92–93: 1–7. doi:10.1016/S0924-0136(99)00118-1. August.
  • Irfan, M., U. Haq, and A. Anand. 2018. “Microhardness Studies on Stir Cast AA7075-Si3N4 Based Composites.” Materials Today: Proceedings 5 (9) (January): 19916–19922. doi:10.1016/j.matpr.2018.06.357.
  • James, S. J., M. Ganesan, P. Santhamoorthy, and P. Kuppan. 2018. “Development of Hybrid Aluminium Metal Matrix Composite and Study of Property.” Materials Today: Proceedings 5 (5) (January): 13048–13054. doi:10.1016/j.matpr.2018.02.291.
  • Jiang, W., Z. Fan, Y. Dai, and C. Li. 2014. “Effects of Rare Earth Elements Addition on Microstructures, Tensile Structures, Tensile Properties and Fractography of A357 Alloy.” Materials Science and Engineering: A 597: 237–244. doi:10.1016/j.msea.2014.01.009.
  • Jung, H. K., P. K. Seo, and C. G. Kang. 2001. “Microstructural Characteristics and Mechanical Properties of Hypo-eutectic and Hyper-eutectic Al-Si Alloys in the Semi-solid Forming Process.” Journal of Materials Processing Technology 113 (1–3) (June): 568–573. doi:10.1016/S0924-0136(01)00708-7.
  • Kattamis, T. Z., and L. A. Cornie. 1997. “Casting of SIC Reinforced Metal Matrix Composites.” In ibid, 47–51.
  • Kern, F., P. Palmero, F. G. Marro, and A. Mestra. 2015. “Processing of Alumina–zirconia Composites by Surface Modification Route with Enhanced Hardness and Wear Resistance.” Ceramics International 41 (1): 889–898. doi:10.1016/j.ceramint.2014.09.006.
  • Kok, M. 2005. “Production and Mechanical Properties of Al2O3 Particle-reinforced 2024 Aluminium Alloy Composites.” Journal of Materials Processing Technology 161 (3) (April): 381–387. doi:10.1016/j.jmatprotec.2004.07.068.
  • Kolsgaard, A., and S. Brusethaug. 1994. “Fluidity of Aluminium Alloy AlSi7Mg–SiC Particulate Composite Melts.” Materials Science and Technology 10 (6): 545–551. doi:10.1179/mst.1994.10.6.545.
  • Kumaraswamy, H. S., V. Bharat, and T. Krishna Rao. 2018. “Influence of Mechanical &tribological BehaviourOf Al 2024 MMC Fabricated by Stir Casting Technique-A Review.” Materials Today: Proceedings 5 (5) (January): 11962–11970. doi:10.1016/j.matpr.2018.02.170.
  • Kurahatti, R., A. O. Surendranathan, S. Srivastava, and N. Singh. 2011. “Role of Nickel Filler on Friction and Dry Sliding Wear Behavior of Bismaleimide Nanocomposite.” International Journal of Earth Sciences and Engineering 4 (6): 1145–1150.
  • Lai, S. W., and D. D. L. Chung. 1994. “Fabrication of Particulate Aluminium-matrix Composites by Liquid Metal Infiltration.” Journal of Materials Science 29 (12) (January): 3128–3150. doi:10.1007/BF00356655.
  • Li, X., Y. Gao, J. Xing, Y. Wang, and L. Fang. 2004. “Wear Reduction Mechanism of Graphite and MoS2 in Epoxy Composites.” Wear 257 (3–4): 279–283. doi:10.1016/j.wear.2003.12.012.
  • Lloyd, D. J. 1989. “The Solidification Microstructure of Particulate Reinforced aluminium/SiC Composites.” Composites Science and Technology 35 (2) (January): 159–179. doi:10.1016/0266-3538(89)90093-6.
  • Lloyd, D. J. 1994. “Particle Reinforced Aluminium and Magnesium Matrix Composites.” International Materials Reviews 39 (1): 1–23. doi:10.1179/imr.1994.39.1.1.
  • Luo, A. 1995. “Processing, Microstructure, and Mechanical Behavior of Cast Magnesium Metal Matrix Composites.” Metall. Mater. Trans. A 26 (9) (September): 2445–2455. doi:10.1007/BF02671259.
  • Madhusudhan, M., G. J. Naveen, and K. Mahesha. 2017. “Mechanical Characterization of AA7068-ZrO2 Reinforced Metal Matrix Composites.” Materials Today: Proceedings 4 (2) (January): 3122–3130. doi:10.1016/j.matpr.2017.02.196.
  • Mazahery, A., and M. O. Shabani. 2012. “Characterization of Cast A356 Alloy Reinforced with Nano SiC Composites.” Transactions of Nonferrous Metals Society of China 22 (2) (February): 275–280. doi:10.1016/S1003-6326(11)61171-0.
  • Ozben, T., E. Kilickap, and O. Çakir. 2008. “Investigation of Mechanical and Machinability Properties of SiC Particle Reinforced Al-MMC.” Journal of Materials Processing Technology 198 (1–3) (March): 220–225. doi:10.1016/j.jmatprotec.2007.06.082.
  • Pantelis, D. I., P. N. Karakizis, N. M. Daniolos, C. A. Charitidis, E. P. Koumoulos, and D. A. Dragatogiannis. 2016. “Microstructural Study and Mechanical Properties of Dissimilar Friction Stir Welded AA5083-H111 and AA6082-T6 Reinforced with SiC Nanoparticles.” Materials and Manufacturing Processes 31 (3) (February): 264–274. doi:10.1080/10426914.2015.1019095.
  • Raju, K., A. P. Harsha, and S. N. Ojha. 2011. “Evolution of Microstructure and Its Effect on Wear and Mechanical Properties of Spray Cast Al-12Si Alloy.” Material Science and Engineering A 528 (25–26): 7723–7728. doi:10.1016/j.msea.2011.06.078.
  • Rohatgi, P., “Solidification of Metal Matrix Composites,” in TMS Solidification Committee and TMS-ASM Composites Committee at Indianapolis, 1990, pp. x–219, Accessed: 29 October 2020. [Online]. Available: https://www.worldcat.org/title/solidification-of-metal-matrix-composites-proceedings-of-a-conference-jointly-sponsored-by-tms-solidification-committee-and-tms-asm-composites-committee-at-indianapolis-1989/oclc/22863108
  • Saenpong, P., S. Talangkun, T. Laonapakul, and A. Boonma. 2018. “Microstructures and Hardness of A356-SiC Composites Produced by the Mechanical Stir Casting.” Materials Today: Proceedings 5 (3) (January): 9489–9496. doi:10.1016/j.matpr.2017.10.129.
  • Sekar, K., G. Jayachandra, and S. Aravindan. 2018. “Mechanical and Welding Properties of A6082-SiC-ZrO2 Hybrid Composite Fabricated by Stir and Squeeze Casting.” Materials Today: Proceedings 5 (9) (January): 20268–20277. doi:10.1016/j.matpr.2018.06.398.
  • Shetty, R., R. B. Pai, and S. S. Rao. “Tribological Studies on Discontinuously Reinforced Aluminum Composites Based on the Orthogonal Arrays.” ARPN J. Eng. Appl. Sci 1 (3): 84–92. January 2008 Accessed: 29 October 2020 [Online]. Available:https://eprints.manipal.edu/140846/
  • Singh, J., and A. Chauhan. 2017. “Fabrication Characteristics and Tensile Strength of Novel Al2024/SiC/red Mud Composites Processed via Stir Casting Route.” Transactions of Nonferrous Metals Society of China 27 (12) (December): 2573–2586. doi:10.1016/S1003-6326(17)60285-1.
  • Smitha, V. S., S. S. Syamili, P. Peer Mohamed, N. N. Balagopal, and U. S. Hareesh. 2018. “ORMOSIL–ZrO2 Hybrid Nanocomposites and Coatings on Aluminium Alloys for Corrosion Resistance; a Sol–gel Approach.” New Journal of Chemistry 42 (12): 10337–10347. doi:10.1039/C7NJ05174C.
  • Song, H. J., and Z. Z. Zhang. 2006. “Investigation of the Tribological Properties of Polyfluo Wax/polyurethane Composite Coating Filled with nano-ZrO2.” Material Science and Engineering A 426 (1–2): 59–65. doi:10.1016/j.msea.2006.03.104.
  • Wan, L., Y. Huang, W. Guo, S. Lv, and J. Feng. 2014. “Mechanical Properties and Microstructure of 6082-T6 Aluminum Alloy Joints by Self-support Friction Stir Welding.” Journal of Materials Science & Technology 30 (12) (December): 1243–1250. doi:10.1016/j.jmst.2014.04.009.
  • Wang, K., W. Li, J. Du, P. Tang, and J. Chen. 2016. “Preparation, Thermal Analysis and Mechanical Properties of In-situ Al2O3/SiO2(p)/Al Composites Fabricated by Using Zircon Tailing Sand.” Materials & Design 99: 303–313. doi:10.1016/j.matdes.2016.03.064. June.
  • Willis, T. C. 1988. “Spray Deposition Process for Metal Matrix Composites Manufacture.” J. Met. Mater 4: 485–488.
  • Zelner, M., H. Minti, R. Reisfeld, H. Cohen, and R. Tenne. 1997. “Preparation and Characterization of CdS Films Synthesized in Situ in Zirconia Sol-Gel Matrix.” Chemistry of Materials 9 (11): 2541–2543. doi:10.1021/cm970245j.
  • Zhou, W., and Z. M. Xu. 1997. “Casting of SiC Reinforced Metal Matrix Composites.” Journal of Materials Processing Technology 63 (1–3) (January): 358–363. doi:10.1016/S0924-0136(96)02647-7.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.