118
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Dynamic analysis of a helicopter blade subjected to the aerodynamic loads based on Euler-Bernoulli beam theory

ORCID Icon
Pages 775-785 | Received 20 Dec 2020, Accepted 02 Apr 2021, Published online: 26 Apr 2021

References

  • Cai, C., and X. Weng. 2017. “Helicopter Blades Running Elevation Measurement Using Omnidirectional Vision.” Chinese Journal of Aeronautics 30: 1974–1984. doi:10.1016/j.cja.2017.09.008.
  • Cha, S. J., J. S. Song, H. H. Lee, S. Na, J.-H. Shim, and P. Marzocca. 2014. “Dynamic Response Control of Rotating Thin Walled Composite Blade Exposed to External Excitations.” Journal of Aerospace Engineering 27 (5): 04014025. doi:10.1061/(ASCE)AS.1943-5525.0000335.
  • Cheng, J., H. Xu, and A. Yan. 2006. “Frequency Analysis of a Rotating Cantilever Beam Using Assumed Mode Method with Coupling Effect.” Mechanics Based Design of Structures and Machines 34 (1): 25–47. doi:10.1080/15367730500501587.
  • The Engineering Toolbox. “U.S. Standard Atmosphere”. https://www.engineeringtoolbox.com/standard-atmosphere-d_604.html (2003, accessed 20 December 2020
  • Galati, F. A., D. Forrester, and S. Dey. 2008. “Application of the Generalised Likelihood Ratio Algorithm to the Detection of a Bearing Fault in a Helicopter Transmission.” Australian Journal of Mechanical Engineering 5 (2): 169–176. doi:10.1080/14484846.2008.11464545.
  • Ganguli, R., and V. Panchore. 2018. The Rotating Beam Problem in Helicopter Dynamics. 1st ed ed. Singapore: Springer.
  • Glaz, B., T. Goel, L. Liu, P. Friedmann, and R. Hafka. 2007. “Application of a Weighted Average Surrogate Approach to Helicopter Rotor Blade Vibration Reduction.” AIAA 1898: 1–25. doi:10.2514/6.2007-1898.
  • Gomes, G. F., J. A. S. Chaves, and F. A. D. Almeida. 2020. “An Inverse Damage Location Problem Applied to AS-350 Rotor Blades Using Bat Optimization Algorithm and Multiaxial Vibration Data.” Mechanical Systems and Signal Processing 145: 106932. doi:10.1016/j.ymssp.2020.106932.
  • Gorelov, A. V., and I. N. Sidorov. 2011. “A Lower Bound Estimate of the Critical Load for Helicopter Main Rotor Composite Blade according to the Limit Equilibrium Theory.” Analysis Results. Structural Mechanics and Strength of Flight Vehicles 54: 341–345. doi:10.3103/S1068799811040039.
  • Ilie, M. 2019. “A Fully-coupled CFD/CSD Computational Approach for Aeroelastic Studies of Helicopter Blade-vortex Interaction.” Applied Mathematics and Computation 347: 122–142. doi:10.1016/j.amc.2018.10.069.
  • Kodakkattu, S. K., M. L. Joly, and P. Nair. 2016. “Vibration Reduction of Helicopter with Trailing-edge Flaps at Various Flying Conditions.” Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 231: 770–784. doi: 10.1177/0954410016642460.
  • Kumar, K. V., M. Safiulla, and A. N. K. Ahmed. 2014. “An Approach for Reducing Cost of Carbon Fibre-reinforced Polymer Structures Using Primary Materials.” Australian Journal of Mechanical Engineering 12 (2): 217–222. doi:10.7158/M12-068.2014.12.2.
  • Laxman, V., C. Venkatesan, and Y. H. Byun. 2013. “Influence of Blade Geometric Parameters on Aeroelastic Response of a Helicopter Rotor System.” Journal of Aerospace Engineering 26 (3): 555–570. doi:10.1061/(ASCE)AS.1943-5525.0000168.
  • Lopez, F., S. Sfarra, A. Chulkov, C. I. Castanedo, H. Zhang, M. A. Omar, V. Vavilov, and X. P. V. Maldague. 2020. “Thermal Stresses Applied on Helicopter Blades Useful to Retrieve Defects by Means of Infrared Thermography and Speckle Patterns.” Thermal Science and Engineering Progress 18: 100511. doi:10.1016/j.tsep.2020.100511.
  • Lorga, L., H. Baruh, and I. Ursu. 2004. “Pseudo-active Control of Helicopter Blade Vibration Using Piezoelectric Actuators.” AIAA 1633: 1–16. doi:10.2514/6.2004-1633.
  • Lyu, W. L. 2020. “Method for Eliminating Aerodynamic Lift Vibration of Rigid Rotor Helicopters Based on the Novel Sine-trim Model.” Aerospace Science and Technology 98: 105655. doi:10.1016/j.ast.2019.105655.
  • Mahariq, I., M. Kavyanpoor, M. Ghalandari, M. A. Nazari, and D. T. Bui. 2020. “Identification of Nonlinear Model for Rotary High Aspect Ratio Flexible Blade Using Free Vibration Response.” Alexandria Engineering Journal 59 (4): 2131–2139. doi:10.1016/j.aej.2020.01.029.
  • Maksimovic, S., M. Kozic, S. S. Kozic, K. Maksimovic, I. Vasović, and M. Maksimovic. 2014. “Determination of Load Distributions on Main Helicopter Rotor Blades and Strength Analysis of Its Structural Components.” Journal of Aerospace Engineering 27 (6): 04014032. doi:10.1061/(ASCE)AS.1943-5525.0000301.
  • Mallick, R., R. Ganguli, and M. S. Bhat. 2013. “An Experimental and Numerical Study of Piezoceramic Actuator Hysteresis in Helicopter Active Vibration Control.” Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 228: 690–705. doi: 10.1177/0954410013478254.
  • Meng, D., P. Xia, K. Lang, E. C. Smith, and C. D. Rahn. 2020. “Neural Network Based Hysteresis Compensation of Piezoelectric Stack Actuator Driven Active Control of Helicopter Vibration.” Sensors and Actuators. A, Physical 302: 111809. doi:10.1016/j.sna.2019.111809.
  • Nour, A., M. T. Gherbi, and I. Tawfiq. 2017. “Analysis of the Bauschinger Effect on a Multilayer Helicopter Blade by XFEM Simulation.” Aerospace Science and Technology 69: 97–113. doi:10.1016/j.ast.2017.05.039.
  • Ozgumus, O. O., and M. O. Kaya. 2012. “Vibration Analysis of a Helicopter Blade with a Piezoelectric Actuated Trailing Edge Flap.” AIAA 1646: 1–19. doi:10.2514/6.2012-1646.
  • Pardo, A. C., I. Goulos, and V. Pachidis. 2016. “Modelling and Analysis of Coupled Flap-lag-torsion Vibration Characteristics Helicopter Rotor Blades.” Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 231: 1804–1823. doi: 10.1177/0954410016675891.
  • Sawalhi, N., and R. B. Randall. 2008. “Helicopter Gearbox Bearing Blind Fault Identification Using a Range of Analysis Techniques.” Australian Journal of Mechanical Engineering 5 (2): 157–168. doi:10.1080/14484846.2008.11464544.
  • Sayed, M., and M. Kamel. 2011. “Stability Study and Control of Helicopter Blade Flapping Vibrations.” Applied Mathematical Modelling 35 (6): 2820–2837. doi:10.1016/j.apm.2010.12.002.
  • Shahedi, S., and M. Mohammadimehr. 2020. “Vibration Analysis of Rotating Fully-bonded and Delaminated Sandwich Beam with CNTRC Face Sheets and AL-foam Flexible Core in Thermal and Moisture Environments.” Mechanics Based Design of Structures and Machines 48 (5): 584–614. doi:10.1080/15397734.2019.1646661.
  • Tamer, A., V. Muscarello, P. Masarati, and G. Quaranta. 2019. “Evaluation of Vibration Reduction Devices for Helicopter Ride Quality Improvement.” Aerospace Science and Technology 95: 105456. doi:10.1016/j.ast.2019.105456.
  • Tong, L., D. Yuting, H. Guanxin, and W. Linpeng. 2016. “Dynamic Response Analysis under Atmospheric Disturbances for Helicopters Based on Elastic Blades.” Chinese Journal of Aeronautics 28: 1–11. doi:10.1016/j.cja.2017.01.005.
  • Yang, H., J. Alotaibi, and R. Morales. 2020. “Advanced On-blade Control for Vibration Reduction of the EC-145 Rotor: Robust Principal Components Vs H∞.” AIAA 0945: 1–26. doi:10.2514/6.2020-0945.
  • Zhao, P., Q. Quan, S. Chen, T. Yang, D. Bai, D. Tang, and Z. Deng. 2019. “Geometry Shape Selection of NACA Airfoils for Mars Rotorcraft.” Acta Astronautica 157: 300–309. doi:10.1016/j.actaastro.2018.12.026.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.