Extraction of Cr from CCLW and its utilisation in the development of composite by friction stir process

References

• Bagheri, B., and M. Abbasi. 2020. “Development of AZ91/SiC Surface Composite by FSP: Effect of Vibration and Process Parameters on Microstructure and Mechanical Characteristics.” Advances in Manufacturing 8 (1): 82–96. doi:10.1007/s40436-019-00288-9.
   Web of Science ®Google Scholar
• Bodunrin, M. O., K. K. Alaneme, and L.H. Chown. 2015. “Aluminium Matrix Hybrid Composites: A Review Ofreinforcement Philosophies; Mechanical, Corrosionandtribological Characteristics.” Journal of Materials Research and Technology 69: 1–12.
   Google Scholar
• Bufalo, G., B. Molino, and L. Ambrosone. 2020. “Selection of Tanned-Leather Waste in Recovering Novel Raw Material for Manufacturing Rubber Artifacts: Towards a Zero-Waste Condition.” Applied Sciences 10 (15): 5374. doi:10.3390/app10155374.
   Google Scholar
• Dixit, S., A. Yadav, P.D. Dwivedi, and M. Das. 2015. “Toxic Hazards of Leather Industry and Technologies to Combat Threat: A Review.” Journal of Cleaner Production 87: 39–49. doi:10.1016/j.jclepro.2014.10.017.
   Web of Science ®Google Scholar
• Dwivedi, S.P. 2020. “Effect of Ball-milled MgO and Si3N4 Addition on the Physical, Mechanical and Thermal Behaviour of Aluminium Based Composite Developed by Hybrid Casting Technique.” International Journal of Cast Metals Research 2020 (33): 35–49. doi:10.1080/13640461.2020.1744370.
   Google Scholar
• Dwivedi, S.P., R. Agrawal, and S. Sharma. 2021. “Effect of Friction Stir Process Parameters on Mechanical Properties of Chrome Containing Leather Waste Reinforced Aluminium Based Composite.” International Journal of Precision Engineering and Manufacturing-Green Technology 8 (3): 935–943. doi:10.1007/s40684-021-00312-z.
   Web of Science ®Google Scholar
• Dwivedi, S.P., A. Dixit, and R. Bajaj. 2019. “Development of Bio-composite Material by Utilizing Chrome Containing Leather Waste with Al2O3 Ceramic Particles.” Materials Research Express 6: 105105. doi:10.1088/2053-1591/ab3f8e.
   Web of Science ®Google Scholar
• Dwivedi, S.P., and V. R. Mishra. 2019. “Physico-Chemical, Mechanical and Thermal Behaviour of Agro-waste RHA-Reinforced Green Emerging Composite Material.” Arabian Journal for Science and Engineering 44: 8129–8142. doi:10.1007/s13369-019-03784-z.
   Web of Science ®Google Scholar
• Dwivedi, S.P., R. Sahu, A.K. Srivastava, N.K. Maurya, A. Tyagi, and R.K. Maurya. 2020. “Machining and Thermal Behaviour of Thermal Power Plant Waste Reinforced Composite Material.” Materials Today: Proceedings 25: 674–678.
   Google Scholar
• Dwivedi, S.P., and A. Saxena. 2020. “Extraction of Collagen Powder from Chrome Containing Leather Waste and Its Composites with Alumina Employing Different Casting Techniques.” Materials Chemistry and Physics 253: 123274. doi:10.1016/j.matchemphys.2020.123274.
   Web of Science ®Google Scholar
• Dwivedi, S.P., P. Sharma, and A. Saxena. 2020. “Utilization of Waste Spent Alumina Catalyst and Agro-waste Rice Husk Ash as Reinforcement Materials with Scrap Aluminium Alloy Wheel Matrix.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 234 (6): 543–552. doi:10.1177/0954408920930634.
   Web of Science ®Google Scholar
• Dwivedi, S.P., S. Sharma, and R. K. Mishra. 2016. “Characterization of Waste Eggshells and CaCO3 Reinforced AA2014 Green Metal Matrix Composites: A Green Approach in the Synthesis of Composites.” International Journal of Precision Engineering and Manufacturing 17 (10): 1383–1393. doi:10.1007/s12541-016-0164-z.
   Web of Science ®Google Scholar
• Dwivedi, S.P., and A.K. Srivastava. 2020. “Utilization of Chrome Containing Leather Waste in Development of Aluminium Based Green Composite Material.” International Journal of Precision Engineering and Manufacturing-Green Technology 7 (3): 781–790. doi:10.1007/s40684-019-00179-1.
   Web of Science ®Google Scholar
• Dwivedi, S.P., A.K Srivastava, N.K. Maurya, and R. Sahu. 2020a. “Microstructure and Mechanical Behaviour of Al/SiC/Agro-Waste RHA Hybrid Metal Matrix Composite.” Revue des Composites et des MatériauxAvancés 30: 43–47. doi:10.18280/rcma.300107.
   Web of Science ®Google Scholar
• Dwivedi, S.P., A.K Srivastava, N.K. Maurya, and R. Sahu. 2020b. “Microstructure and Mechanical Behavior of Al/SiC/Agro-Waste RHA Hybrid Metal Matrix Composite.” Journal of Composite and Advanced Material 30: 43–47.
   Web of Science ®Google Scholar
• Fernandez, J.B., E.J. Macias, J. Muro, L.S. Caputi, D. Miriello, R. De Luca, A.S. Roca, and H.D.C. Fals. 2018. “Tribological Behavior of AA1050H24-graphene Nanocomposite Obtained by Friction Stir Processing.” Metals 8: 113. doi:10.3390/met8020113.
   Web of Science ®Google Scholar
• Golmohammadi, M., M. Atapour, and A. Ashrafi. 2015. “Fabrication and Wear Characterization of an A413/Ni Surface Metal Matrix Composite Fabricated via Friction Stir Processing.” Materials & Design 85: 471–482.
   Web of Science ®Google Scholar
• Gupta, M.K. 2019. “Analysis of Tribological Behavior of Al/Gr/MoS2 Surface Composite Fabricated by Friction Stir Process.” Carbon Letter. 1 0.1 007/s42823-019-00109–w.
   Web of Science ®Google Scholar
• Gupta, M.K., P.K. Rakesh, and I. Singh. 2016. “Application of Industrial Waste in Metal Matrix Composite.”.” Journal of Polymer Composites 4 (3): 2321–8525.
   Web of Science ®Google Scholar
• Hamdollahzadeh, A., M. Bahrami, M. FarahmandNikoo, A. Yusefi, M.K. Besharat iGivi, and N. Parvin. 2015. “Microstructure Evolutions and Mechanical Propertiesof nano-SiC-fortified AA7075 Friction Stir Weldment: The Role of Second Pass Processing.” Journal of Manufacturing Processes 344: 1–7.
   Google Scholar
• Heydarian, A., K. Dehghani, and T. Slamkish. 2014. “Optimizing Powder Distribution in Production of Surface Nano-composite via Friction Stir Processing.” Metallurgical and Materials Transactions B 45 (3): 821–826. doi:10.1007/s11663-014-0025-z.
   Web of Science ®Google Scholar
• Huang, G., W. Hou, J. Li, and Y. Shen. 2018. “Development of Surface Composite Based on Al-Cu System by Friction Stir Processing: Evaluation of Microstructure, Formation Mechanism and Wear Behavior.” Surface & Coatings Technology 344: 30–42. doi:10.1016/j.surfcoat.2018.03.005.
   Web of Science ®Google Scholar
• Hussain, G., R. Hashemi, H. Hashemi, and K.A. Al-ghamdi. 2016. “An Experimental Study on Multi-pass Friction Stir Processing of Al/TiN Composite: Some Microstructural, Mechanical, and Wear Characteristics.” The International Journal of Advanced Manufacturing Technology 84 (1–4): 533–546. doi:10.1007/s00170-015-7504-5.
   Web of Science ®Google Scholar
• Jerome, S., B.S. Govind, B.S.P. Kumaresh, and B. Ravisankar. 2012. “Influence of Microstructure and Experimental Parameters on Mechanical and Wear Properties of Al-TiC Surface Composite by FSP Route.” Journal of Minerals and Materials Characterization and Engineering 11 (5): 493–507.
   Google Scholar
• Kanga, Q., Y. Qin, Q. Lu, and F. Gao. 2020. “Waste Leather-derived (Cr, N)-co-doped Carbon Cloth Coupling with Mo2C Nanoparticles as a Self-supported Electrode for Highly Active Hydrogen Evolution Reaction Performances.” Journal of Power Sources 476: 228706. doi:10.1016/j.jpowsour.2020.228706.
   Web of Science ®Google Scholar
• Khodabakhshi, F., A.P. Gerlich, A. Simchi, and A.H. Kokabi. 2015. “Cryogenic Friction-stir Processing of Ultrafine-grained Al-Mg-TiO2 Nanocomposites.”.” Materials Science and Engineering: A 620: 471–482. doi:10.1016/j.msea.2014.10.048.
   Web of Science ®Google Scholar
• Krishnamoorthy, G., S. Sadulla, P.K. Sehgal, and A.B. Mandal. 2012. “Green Chemistry Approaches to Leather Tanning Process for Making Chrome-free Leather by Unnatural Amino Acids.” Journal of Hazardous Materials 215– 216: 173–182. doi:10.1016/j.jhazmat.2012.02.046.
   PubMed Web of Science ®Google Scholar
• Kumar, S., S.P. Dwivedi, and V.K. Dwivedi. 2020. “Synthesis and Characterization of Ball-milled Eggshell and Al2O3 Reinforced Hybrid Green Composite Material.” Journal of Metals, Materials and Minerals 30: 67–75.
   Web of Science ®Google Scholar
• Kurt, H.I., M. Oduncuoglu, and R. Asmatulu. 2016. “WearBehaviorofAluminumMatrix Hybrid Composites Fabricated through Friction Stir Welding Process.” Journal of Iron and Steel Research, International 23 (10): 1119–1126. doi:10.1016/S1006-706X(16)30165-0.
   Web of Science ®Google Scholar
• Maamoun, A.H., S.C. Veldhuis, and M. Elbestawi. 2019. “Friction Stir Processing of AlSi10Mg Parts Produced by Selective Laser Melting.”.” Journal of Materials Processing Technology 263: 308–320. doi:10.1016/j.jmatprotec.2018.08.030.
   Web of Science ®Google Scholar
• Mandal, A., M. K. Farhan, and T. P. Sastry. 2016. “Effect of Reinforced Al2O3 Nanoparticles on Collagen Nano-bio-composite from Chrome-containing Leather Waste for Biomedical Applications.” Clean Technologies and Environmental Policy 18 (3): 765–773. doi:10.1007/s10098-015-1045-3.
   Web of Science ®Google Scholar
• Manikandan, R., and T.V. Arjunan. 2019. “Microstructure and Mechanical Characteristics of CDA–B 4 C Hybrid Metal Matrix Composites.” Metals and Materials International 1–15. doi:10.1007/s12540-019-00518-6.
   Google Scholar
• Mehra, M., S. P. Dwivedi, N. Kumar, N. Thukral, and Y. Singh. 2019. “Extraction of Collagen from Leather Waste to Develop Aluminium Based Metal Matrix Composite.” Materials Today: Proceedings. doi:10.1016/j.matpr.2019.07.241.
   PubMedGoogle Scholar
• Oki, M. 2020. “A Review of Ceramic/bio-based Hybrid Reinforced Aluminium Matrix Composites.” Cogent Engineering 7 (1): 1727167. doi:10.1080/23311916.2020.1727167.
   Web of Science ®Google Scholar
• Oliveira, D.Q., M. Gonçalves, L.C. Oliveira, and L.R. Guilherme. 2008. “Removal of as (V) and Cr (VI) from Aqueous Solutions Using Solid Waste from Leather Industry.” Journal of Hazardous Materials 151 (1): 280–284. doi:10.1016/j.jhazmat.2007.11.001.
   PubMed Web of Science ®Google Scholar
• Ozgunny, H., S. Colak, M. M. Mutlu, and F. Akyuz. 2007. “Characterization of Leather Industry Wastes.” Polish Journal of Environment Studies 16 (6): 867–873.
   Web of Science ®Google Scholar
• Piccin, J.S., C. S. Gomes, L. A. Feris, and M. Gutterres. 2012. “Kinetics and Isotherms of Leather Dye Adsorption by Tannery Solid Waste.” Chemical Engineering Journal 183: 30–38. doi:10.1016/j.cej.2011.12.013.
   Web of Science ®Google Scholar
• Reddy, G.M., A.S. Rao, and K.S. Rao. 2013. “Friction Stir Surfacing Route: Effective Strategy for the Enhancement of Wear Resistance of Titanium Alloy.” Transactions of the Indian Institute of Metals 66: 231–238. doi:10.1007/s12666-013-0254-x.
   Web of Science ®Google Scholar
• Sathish, M., B. Madhan, K.J. Sreeram, J.R. Rao, and B.U. Nair. 2016. “Alternative Carrier Medium for Sustainable Leather Manufacturing – A Review and Perspective.” Journal of Cleaner Production 112: 49–58. doi:10.1016/j.jclepro.2015.06.118.
   Web of Science ®Google Scholar
• Senapati, A. K., V. S. Manas, A. Singh, S.,and Dash, and P.K. Sahoo. 2016. “A Comparative Investigation on Physical and Mechanical Properties of Mmc Reinforced with Waste Materials.” International Journal of Research in Engineering and Technology 5 (3): 172–178. doi:10.15623/ijret.2016.0503036.
   Google Scholar
• Singh, C.V., P. Pachauri, S.P. Dwivedi, S. Sharma, and R.M. Singari. 2019. “Formation of Functionally Graded Hybrid Composite Materials with Al2O3 and RHA Reinforcements Using Friction Stir Process.” Australian Journal of Mechanical Engineering: 1–14. doi:10.1080/14484846.2019.1679583.
   Web of Science ®Google Scholar
• Singh, J., and A. Chauhan. 2015. “Characterization of Hybrid Aluminum Matrix Composites for Advanced Applications – A Review.” Journal of Materials Research and Technology 70: 1–11.
   Google Scholar
• Velosa, J., R. Fangueir, N. Martins, M. Fernandes, and F. Soutinho. 2013. “Waste Fiber Reinforced Composite Materials: Production and Mechanical Properties.” Materials Science Forum 730-732: 665–670. 1 0.4028/w ww.scientific.net/MSF.730-732.665.
   Google Scholar
• Yang, K., W.Y. Li, P.L. Niu, X.W. Yang, and Y. X. Xu. 2018. “Cold Sprayed AA2024/Al2O3 Metal Matrix Composites Improved by Friction Stir Processing: Microstructure Characterization, Mechanical Performance and Strengthening Mechanisms.” Journal of Alloys and Compounds 736: 115–123. doi:10.1016/j.jallcom.2017.11.132.
   Web of Science ®Google Scholar
• Yang, R., Z.Y. Zhang, Y.T. Zhao, G. Chen, Y.H. Guo, M.P. Liu, and J. Zhang. 2015. “Effect of Multi-pass Friction Stir Processing on Microstructure and Mechanical Properties of Al3Ti/A356 Composites.” Materials Characterization 106: 62–69. doi:10.1016/j.matchar.2015.05.019.
   Web of Science ®Google Scholar
• Yuvaraj, N., S. Aravindan, and Vipin. 2015. “Fabrication of Al5083/B4C Surface Composite by Friction Stir Processing and Its Tribological Characterization.” Journal of Material Research and Technology 154: 1–12.
   Google Scholar