Evaluation of WEDM performance characteristics and prediction of machining speed during taper square profiling on Hastelloy-X

References

• Abyar, H., A. Abdullah, and A. Akbarzadeh. 2018. “Analyzing wiredeflectionerrorsofWEDMprocessonsmallarcedcorners.” Journal of Materials Processing Technology 36: 216–223.
   Google Scholar
• Abyar, H., Abdullah, A., and Shafaroud, A.A. 2019. “Theoretical and experimental analysis of machining errors on small arced corners during WEDM finishing stages.” Journal Machining Science and Technology An International Journal 23(5): 734-757.
   Google Scholar
• Bisaria, H., and P. Shandilya. 2019. “Experimental Investigation on Wire Electric Discharge Machining (WEDM) of Nimonic C-263 Superalloy.”.” Materials and Manufacturing Processes34 34 (1): 83–92. doi:10.1080/10426914.2018.1532589.
   Web of Science ®Google Scholar
• Chandler H. 2006. “Heat Treater’s Guide Practices and Procedures for Nonferrous Alloys.” Third Printing, ASM International, Materials Park, OH 44073-0002 (Printed in the United States of America).
   Google Scholar
• Chaudhary, T., A.N. Siddiquee, and K. ChandaA. 2019. ““Effect of Wire Tension on Different Output Responses during Wire Electric Discharge Machining on AISI 304 Stainless Steel.” Defence Technology 15 (4): 541–544. doi:10.1016/j.dt.2018.11.003.
   Web of Science ®Google Scholar
• Chen, Z., Y. Zhang, G. Zhang, and W. Li. 2018. “Modeling and Reducing Workpiece Corner Error Due to Wire Deflection inWEDM Rough Corner-cutting.” Journal of Materials Processing Technology 36: 557–564.
   Google Scholar
• Electronica India Ltd, “Operating Manual for ELPLUS 15 Ecocut, 2011” Retrieved by email from company, access date : 25May 2011.
   Google Scholar
• Habib, S. 2017. ““Optimization of Machining Parameters and Wire Vibration in Wire Electrical Discharge Machining Process.” Mechanics of Advanced Materials and Modern Processes 3 (1): 1–9. doi:10.1186/s40759-017-0017-1.
   Google Scholar
• Habib, S., and A. Okada. 2016. ““Experimental Investigation on Wire Vibration during Fine Wire Electrical Discharge Machining Process.” The International Journal of Advanced Manufacturing Technology 84 (9–12): 2265–2276. doi:10.1007/s00170-015-7818-3.
   Web of Science ®Google Scholar
• Joy, R., I.V. Manoj, and S. Narendranath. 2020. ““Investigation of Cutting Speed, Recast Layer and Micro-hardness in Angular Machining Using Slant Type Taper Fixture by WEDM of Hastelloy X.” Materials Today: Proceedings 27: 1943–1946.
   Google Scholar
• Kara, F., K. Aslantas, and A. Çiçek. 2016. ““Prediction of Cutting Temperature in Orthogonal Machining of Aisi 316l Using Artificial Neural Network.” Applied Soft Computing 38: 64–74. doi:10.1016/j.asoc.2015.09.034.
   Web of Science ®Google Scholar
• Maher, I., A.A.D. Sarhan, H. Marashi, M.M. Barzani, and M. Hamdi. 2016. ““White Layer Thickness Prediction in wire-EDM Using Cu Zn-coated Wire Electrode – ANFIS Modelling.” Transactions of the IMF 94 (4): 204–210. doi:10.1080/00202967.2016.1180847.
   Web of Science ®Google Scholar
• Manikandan, N., K. Balasubramanian, D. Palanisamy, P.M. Gopal, D. Arulkirubakaran, and J.S. Binoj. 2019. ““Machinability Analysis and ANFIS Modelling on AdvancedMachining of Hybrid Metal Matrix Composites for Aerospace Applications.” Materials and Manufacturing Processes 34 (16): 1866–1881. doi:10.1080/10426914.2019.1689264.
   Google Scholar
• Manjaiah, M., and F. L. Rudolph. 2017. ““Study on Recast Layer Thickness and Residual Stress during WEDM of SMAs.” Emerging Materials Research 6 (1): 82–88. doi:10.1680/jemmr.16.00120.
   Web of Science ®Google Scholar
• Manoj, I.V., R. Joy, and S. Narendranath. 2020. ““Investigation on the Effect of Variation in Cutting Speeds and Angle of Cut during Slant Type Taper Cutting in WEDM of Hastelloy X.” Arabian Journal for Science and Engineering 45 (2): 641–651. doi:10.1007/s13369-019-04111-2.
   Web of Science ®Google Scholar
• Manoj, I.V., R. Joy, S. Narendranath, and D. Nedelcu. 2019. ““Investigation of Machining Parameters on Corner Accuracies for Slant Type Taper Triangle Shaped Profiles Using WEDM on Hastelloy X.” IOP Conference Series: Materials Science and Engineering 591: 1–11. doi:10.1088/1757-899X/591/1/012022).
   Google Scholar
• Manoj, I.V., and S. Narendranath. 2019. ““Variation and Artificial Neural Network Prediction of Profile Areas during Slant Type Taper Profiling of Triangle at Different Machining Parameters on Hastelloy X by Wire Electric Discharge Machining.” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 100: 1223–1242.
   Google Scholar
• Naresh, C., P.S.C. Bose, and C.S.P. Rao. 2020. “Artificial Neural Networks and Adaptive Neuro‑fuzzy Models for Predicting WEDM Machining Responses of Nitinol Alloy: Comparative Study.” SN Applied Sciences314, no. 2: 1–23.
   Web of Science ®Google Scholar
• Naresh Chakala, P., S. Chandrabose, and C.S.P. Rao. 2019. “Optimisation of WEDM Parameters on Nitinol Alloy Using RSM and Desirability Approach.” Australian Journal of Mechanical Engineering. doi:10.1080/14484846.2019.1681239.
   Web of Science ®Google Scholar
• Naveed, R., N.M. Mufti, K. Ishfaq, N. Ahmed, and S.A. Khan. 2019. “Complextaper Profile Machining of WC-Co Composite Using Wire Electric Discharge Process: Analysis of Geometrical Accuracy, Cutting Rate, and Surface Quality.” The International Journal of Advanced Manufacturing Technology105 105 (1–4): 411–423. doi:10.1007/s00170-019-04150-x.
   Web of Science ®Google Scholar
• Nayak, B.B., and S.S. Mahapatra. 2016. “Optimization of WEDM Process Parameters Using Deep Cryo-treated Inconel 718 as Work Material.” Engineering Science and Technology, an International Journal19 19 (1): 161–170. doi:10.1016/j.jestch.2015.06.009.
   Google Scholar
• Puri, A.B., and B. Bhattacharyya. 2003a. ““Modelling and Analysis of the Wire-tool Vibration in Wire-cut EDM.” Journal of Materials Processing Technology 141 (3): 295–301. doi:10.1016/S0924-0136(03)00280-2.
   Web of Science ®Google Scholar
• Puri, A.B., and B. Bhattacharyya. 2003b. ““Modelling and Analysis of the Wire-tool Vibration in Wire-cut EDM.” Journal of Materials Processing Technology 141 (3): 295–301.
   Web of Science ®Google Scholar
• Raj, S., Oliver Nesa, and S. Prabhu. 2017. “Modeling and Analysis of Titanium Alloyin Wire-cut EDM Using Grey Relation Coupled with Principle Component Analysis.” Australian Journalof Mechanical Engineering 15 (3): 198–209. doi:10.1080/14484846.2016.1251077.
   Web of Science ®Google Scholar
• Sanchez, J.A., J.L. Rodil, A. Herrero, L.N.L.D. Lacalle, and A. Lamikiz. 2007. ““On the Influence of Cutting Speed Limitation on the Accuracy of wire-EDM Corner-cutting.” Journal of Materials Processing Technology 182 (1–3): 574–579. doi:10.1016/j.jmatprotec.2006.09.030.
   Web of Science ®Google Scholar
• Sarkar, S., K. Ghosh, S. Mitra, and B. Bhattacharyya. 2010. ““An Integrated Approach to Optimization of WEDM Combining Single-Pass and Multipass Cutting Operation.” Materials and Manufacturing Processes 25 (8): 799–807. doi:10.1080/10426910903575848.
   Web of Science ®Google Scholar
• Selvakumar, G., K.B. Jiju, S. Sarkar, and S. Mitra. 2016. ““Enhancing Die Corner Accuracy through Trim Cut in WEDM.” The International Journal of Advanced Manufacturing Technology 83 (5–8): 791–803. doi:10.1007/s00170-015-7606-0.
   Web of Science ®Google Scholar
• Selvakumar, G., K.G.T. Kuttalingam, and S.R. Prakash. 2018. ““Investigation on Machining and Surface Characteristics of AA5083 for Cryogenic Applications by Adopting Trim Cut in WEDM.” Journal of the Brazilian Society of Mechanical Sciences and Engineering 40 (5): 1–8. doi:10.1007/s40430-018-1192-7.
   Web of Science ®Google Scholar
• Somvir, S.N., G. Dixit, and S. Kumar. 2018. “Performance Evaluation of the WEDM Process of Aeronautics Super Alloy.” Materials and Manufacturing Processes33 (16):1793-1808,[4] Kumar, S.,Adam Khan, M., andMuralidharan, B. 2019.“Processing of Titanium-based Human Implant Material Using Wire EDM.” Materials and Manufacturing Processes34, no. 6: 695–700.
   Google Scholar
• Suganthi, X.H., U. Natarajan, S. Sathiyamurthy, and K. Chidambaram. 2013. “Prediction of Quality Responses in micro-EDM Process Using an Adaptive Neuro-fuzzy Inference System (ANFIS) Model.” The International Journal of Advanced Manufacturing Technology 68 (1–4): 339–347. doi:10.1007/s00170-013-4731-5.
   Web of Science ®Google Scholar
• Vazini, A., and S.R.A. Afza. 2013. “Teimouri,R.Parametric Study along with Selection of Optimal Solutions in Dry Wirecut Machining of Cemented Tungsten Carbide (Wc-co).” Journal of Materials Processing Technology15, no. 4: 644–658.
   Google Scholar
• Werner, A. 2016. “Method for Enhanced Accuracy in Machining Curvilinear Profiles on Wire-cut Electrical Discharge Machines.” Precision Engineering 44: 75–80. doi:10.1016/j.precisioneng.2015.10.004.
   Web of Science ®Google Scholar
• Zhang, G., H. Li, Z. Zhang, W. Ming, N. Wang, and Y. Huang. 2016. ““Vibration Modeling and Analysis of Wire during the WEDM Process.” Journal Machining Science and TechnologyAn International Journal 20: 173–186.
   Web of Science ®Google Scholar