References
- Becht, C. IV. 2002. “An Evaluation of EJMA Stress Calculations for Unreinforced Bellows, Journal of Pressure Vessel Technology.” Transactions of The ASME,124, 124-129.
- EJMA. 2008. Standards of Expansion Joint Manufacturers Association. 9th ed. New- York.
- Hao, Z. L., C. Y. Xi, Z. H. Huang, C. H. Zhang, and J.T Jun Ting Luo. 2018. “Hydraulic Bulging Process with Axial Feedings and Strain Field of U-shaped Metal Bellows.” Journal of Central South University 25 (11): 2712–2721. doi:10.1007/s11771-018-3948-8.
- Hong, Y. Y., H. M. Hsieh, and S. Y. Ho. 2007. “Determination of Locations for Static Transfer Switches Using Genetic Algorithms and Fuzzy Multi-objective Programming. International.” Journal of Electrical Power & Energy Systems 29 (6): 480–487. doi:10.1016/j.ijepes.2006.11.007.
- Kaushik, N., and S Singhal. 2018. “Hybrid Combination of Taguchi-GRA-PCA for Optimization of Wear Behavior in AA6063/SiCp Matrix Composite.” Production & Manufacturing Research 6 (1): 171–189. doi:10.1080/21693277.2018.1479666.
- Ko, B.G., G.J. Park, and W.I. Lee. 1995. “Mechanical Behavior of U –shaped Bellows and Shape Optimal Design Using Multiple Objective Optimization Method.” KSME Journal 9, 91-101.
- Li, Y. 1990. “Strength Analysis and Structural Optimization of U-shaped Bellows.” International Journal of Pressure Vessels and Piping 42 (1): 33–46. doi:10.1016/0308-0161(90)90053-K.
- Liu, J., H. Li, Y. Liu, L Li, and C. Sun. 2018. “Size Effect Related Hydroforming Characteristics of Thin-walled 316-L Bellows considering Pressure Change. The.” International Journal of Advanced Manufacturing Technology 98 (1–4): 505–522. doi:10.1007/s00170-018-2280-7.
- Mahajan, K.A., and R. Pawade. 2021.“Effect of Machining Parameters and Vibration on Polymethylmethacrylate Curved Surface in Single-point Diamond Turning.” Journal of Micromanufacturing 4(1), 74-83.
- Mehat, N. M., S. Kamaruddin, A.R. Othman, N.M. Mehat, and S Kamaruddin. 2014. “Hybrid Integration of Taguchi Parametric Design, Grey Relational Analysis, and Principal Component Analysis Optimization for Plastic Gear Production.” Chinese Journal of Engineering 351206 (1–11): 2014.
- Naveen Kumar, J. P., J. S. Kumar, R.K. SarathiJeyathilak, M. Venkatesh, A. S. Christopher, and K. C. Ganesh. 2017. “Effect of Design Parameters on the Static Mechanical Behaviour of Metal Bellows Using Design of Experiment and Finite Element Analysis.” International Journal on Interactive Design and Manufacturing (Ijidem) 11 (3): 535–545. doi:10.1007/s12008-016-0306-7.
- Nemeth, B., A. Molnar, S. Bozoki, K. Wijaya, A. Inotai, J. D Campbell, and Z Kalo. 2019. “Comparison of Weighting Methods Used in Multi-criteria Decision Analysis Frameworks in Healthcare with Focus on Low and Middle Income Countries.” Journal of Comparative Effectiveness Research 8 (4): 195–204. doi:10.2217/cer-2018-0102.
- Ni, C. C. 2012. “Grey Relational Grade Analysis between Vickers Hardness and Fatigue Crack Growth Data of 2024-T351 Aluminum Alloy.” Advanced Materials Research 476: 2435–2439. www.scientific.net/AMR.476-478.2435
- Pagar, N. D, and H. Gawande. 2020a. “Parametric Design Analysis of Meridional Deflection Stresses in Metal Expansion Bellows Using Gray Relational Grade.” J Braz. Soc. Mech. Sci. Eng 42 (256): 2020. doi:10.1007/s40430-020-02327-0.
- Pagar, N. D., and H. Gawande. 2020b. “Multi-response Design Optimisation of Convolution Stresses of Metal Bellows Using Integrated PCA-GRA Approach.” Australian Journal of Mechanical Engineering 1–21. (Published online). doi:10.1080/14484846.2020.1725347.
- Panda, A., A.K. Sahoo, and R. Rout. 2016. “Multi-attribute Decision Making Parametric Optimization and Modeling in Hard Turning Using Ceramic Insert through Grey Relational Analysis: A Case Study.” Decision Science Letters 5 (4): 581–592. doi:10.5267/j.dsl.2016.3.001.
- Pradhan, M. K. 2013. “Estimating the Effect of Process Parameters on MRR, TWR and Radial Overcut of EDMed AISI D2 Tool Steel by RSM and GRA Coupled with PCA.” International Journal of Advanced Manufacturing Technology 68 (1–4): 591–605. doi:10.1007/s00170-013-4780-9.
- Raissi, H. 2020a. “Stress Analysis in Adhesive Layers of a Five-layer Circular Sandwich Plate Subjected to Temperature Gradient Based on Layerwise Theory.” In Mechanics of Advanced Materials and Structures. (Published online, 2020)
- Raissi, H., M. Shishehsaz, and S Moradi. 2019. “Stress Distribution in a Five-layer Sandwich Plate with FG Face Sheets Using Layerwise Method.” Mechanics of Advanced Materials and Structures 26 (14): 1234–1244. doi:10.1080/15376494.2018.1432796.
- Raissi, H., M. Shishesaz, and S. Moradi. 2017. “Applications of Higher Order Shear Deformation Theories on Stress Distribution in a Five Layer Sandwich Plate.” Journal of Computational Applied Mechanics 48 (2): 233–252.
- Safari, M., J. Joudaki, and Y Ghadiri. 2019. “A Comprehensive Study of the Hydroforming Process of Metallic Bellows: Investigation and Multi-objective Optimization of the Process Parameters.” International Journal of Engineering 32 (11): 1681–1688.
- Shishehsaz, M., H. Raissi, and S Moradi. 2020. “Stress Distribution in a Five-layer Circular Sandwich Composite Plate Based on the Third and Hyperbolic Shear Deformation Theories.” Mechanics of Advanced Materials and Structures 27 (11): 927–940. doi:10.1080/15376494.2018.1502379.
- Sutono, S.B., H.A. Salwa, Z. Taha, and Subagyo. 2017. “Integration of Grey-based Taguchi Method and Principal Component Analysis for Multi-response Decision-making in Kansei Engineering.” European Journal of Industrial Engineering 11 (2): 205–228. doi:10.1504/EJIE.2017.083254.
- Sylajakumari, P. A., R. Ramkrishnasamy, and G Palaniappan. 2018. “Taguchi Grey Relational Analysis for Multi Response Optimization of Wear in Co-continuous Composite.” Materials 11 (1743): 1–17.
- Velasquez, M., and P. T. Hester. 2013. “An Analysis of Multi-criteria Decision Making Methods.” International Journal of Operations Research 10 (2): 56–66.
- Wu, H. 2002. “A Comparative Study of Using Grey Relational Analysis in Multiple Attribute Decision Making Problems.” Quality Engineering 15 (2): 209–217. doi:10.1081/QEN-120015853.