Influence of turning parameters on the machinability of Al6061/ZrB2 & ZrC hybrid in-situ Aluminium Matrix Composite

References

• Anandakrishnan, V., and A. Mahamani. 2011. “Investigations of Flank Wear, Cutting Force, and Surface Roughness in the Machining of Al-6061–TiB2 in Situ Metal Matrix Composites Produced by Flux-assisted Synthesis.” The International Journal of Advanced Manufacturing Technology 55 (4): 65–73. doi:10.1007/s00170-010-3042-3.
   Web of Science ®Google Scholar
• Bhushan, Rajesh Kumar. 2020. “Optimisation of Machining Parameters for Minimising Cutting Forces during Machining of Al Alloy SiC Particle Composites.” Australian Journal of Mechanical Engineering 1–15. doi:10.1080/14484846.2020.1714349.
   Web of Science ®Google Scholar
• Bhushan, Rajesh Kumar. 2021. “Minimising Tool Wear by Optimisation (ANOVA) of Cutting Parameters in Machining of 7075Al Alloy SiC Particle Composite.” Australian Journal of Mechanical Engineering 1–19. doi:10.1080/14484846.2021.1873068.
   Web of Science ®Google Scholar
• Devaraj, S., Ramakrishna Malkapuram, and B. Singaravel. 2021. “Performance Analysis of Micro Textured Cutting Insert Design Parameters on Machining of Al- MMC in Turning Process.” International Journal of Lightweight Materials and Manufacture 4 (2): 210–217. doi:10.1016/j.ijlmm.2020.11.003.
   Google Scholar
• Dinaharan, I., G. Ashok Kumar, S. J. Vijay, and N. Murugan. 2014. “Development of Al3Ti and Al3Zr Intermetallic Particulate Reinforced Aluminum Alloy AA6061 in Situ Composites Using Friction Stir Processing.” Materials & Design 63: 213–222. doi:10.1016/j.matdes.2014.06.008.
   Web of Science ®Google Scholar
• Dinaharan, I., N. Murugan, and Siva Parameswaran. 2011. “Influence of in Situ Formed ZrB2 Particles on Microstructure and Mechanical Properties of AA6061 Metal Matrix Composites.” Materials Science and Engineering A 528 (18): 5733–5740. doi:10.1016/j.msea.2011.04.033.
   Web of Science ®Google Scholar
• Elango, M., and K. Annamalai. 2020. “High Speed Machining and Optimisation of Al/SiC/Gr Hybrid Metal Matrix Composites Using ANOVA and Grey Relational Analysis.” Australian Journal of Mechanical Engineering. doi:10.1080/14484846.2020.1761587.
   Web of Science ®Google Scholar
• El-Gallab, M., and M. Sklad. 1998. “Machining of Al/SiC Particulate Metal Matrix Composites: Part II: Workpiece Surface Integrity.” Journal of Materials Processing Technology 83 (3): 277–285. doi:10.1016/S0924-0136(98)00072-7.
   Web of Science ®Google Scholar
• Gopalakannan, S., and T. Senthilvelan. 2013. “Application of Response Surface Method on Machining of Al–SiC Nano-composites.” Measurement 46 (8): 2705–2715. doi:10.1016/j.measurement.2013.04.036.
   Web of Science ®Google Scholar
• Gopalakrishnan, S., and N. Murugan. 2012. “Production and Wear Characterization of AA6061 Matrix Titanium Carbide Particulate Reinforced Composite by Enhanced Stir Casting Method.” Composites Part B 43 (2): 302–308. doi:10.1016/j.compositesb.2011.08.049.
   Web of Science ®Google Scholar
• Jeshurun, Lijay, K., J. David Raja Selvam, I. Dinaharan, and S. J. Vijay. 2016. “Microstructure and Mechanical Properties Characterization of AA6061/TiC Aluminum Matrix Composites Synthesized by in Situ Reaction of Silicon Carbide and Potassium Fluotitanate.” Transactions of Nonferrous Metals Society of China 26 (7): 1791–1800. doi:10.1016/S1003-6326(16)64255-3.
   Web of Science ®Google Scholar
• JIANG, R., X. CHEN Renwei, Wenhu Ge, Guodong SONG Wang, and G. Song. 2018. “Influence of TiB2 Particles on Machinability and Machining Parameter Optimization of TiB2/Al MMCs.” Chinese Journal of Aeronautics 31 (1): 187–196. doi:10.1016/j.cja.2017.03.012.
   Web of Science ®Google Scholar
• Kalaiselvan, K., N. Murugan, and Siva Parameswaran. 2011. “Production and Characterization of AA6061–B4C Stir Cast Composite.” Materials & Design 32 (7): 4004–4009. doi:10.1016/j.matdes.2011.03.018.
   Web of Science ®Google Scholar
• Kannan, S., H. A. Kishawy, and I. Deiab. 2009. “Cutting Forces and TEM Analysis of the Generated Surface during Machining Metal Matrix Composites.” Journal of Materials Processing Technology 209 (5): 2260–2269. doi:10.1016/j.jmatprotec.2008.05.025.
   Web of Science ®Google Scholar
• Karabulut, Şener. 2015. “Optimization of Surface Roughness and Cutting Force during AA7039/Al2O3 Metal Matrix Composites Milling Using Neural Networks and Taguchi Method.” Measurement 66: 139–149. doi:10.1016/j.measurement.2015.01.027.
   Web of Science ®Google Scholar
• Khorasani, Amir Mahyar, Ian Gibson, Egan H. Moshe Goldberg, Guy Littlefair Doeven, and G. Littlefair. 2016. “Investigation on the Effect of Cutting Fluid Pressure on Surface Quality Measurement in High Speed Thread Milling of Brass Alloy (C3600) and Aluminium Alloy (5083).” Measurement 82: 55–63. doi:10.1016/j.measurement.2015.12.016.
   Web of Science ®Google Scholar
• Mia, Mozammel, and Nikhil Ranjan Dhar. 2016. “Prediction of Surface Roughness in Hard Turning under High Pressure Coolant Using Artificial Neural Network.” Measurement 92: 464–474. doi:10.1016/j.measurement.2016.06.048.
   Web of Science ®Google Scholar
• Muralidharan, N., K. Chockalingam, I. Dinaharan, and K. Kalaiselvan. 2018. “Microstructure and Mechanical Behavior of AA2024 Aluminum Matrix Composites Reinforced with in Situ Synthesized ZrB2 Particles.” Journal of Alloys and Compounds 735: 2167–2174. doi:10.1016/j.jallcom.2017.11.371.
   Web of Science ®Google Scholar
• Onat, Adem. 2010. “Mechanical and Dry Sliding Wear Properties of Silicon Carbide Particulate Reinforced Aluminium–copper Alloy Matrix Composites Produced by Direct Squeeze Casting Method.” Journal of Alloys and Compounds 489 (1): 119–124. doi:10.1016/j.jallcom.2009.09.027.
   Web of Science ®Google Scholar
• Paulo, Davi J.m 2002. “Diamond Tool Performance in Machining Metal–matrix Composites.” Journal of Materials Processing Technology 128 (1–3): 100–105. doi:10.1016/S0924-0136(02)00431-4.
   Web of Science ®Google Scholar
• Paulo, Davim, J., and CA Conceicao Antonio. 2001. “Optimisation of Cutting Conditions in Machining of Aluminium Matrix Composites Using a Numerical and Experimental Model.” Journal of Materials Processing Technology 112 (1): 78–82. doi:10.1016/S0924-0136(01)00551-9.
   Web of Science ®Google Scholar
• Pugazhenthi, A., I. Dinaharan, G. Kanagaraj, and J.David Raja Selvam. 2018. “Predicting the Effect of Machining Parameters on Turning Characteristics of AA7075/TiB2 in Situ Aluminum Matrix Composites Using Empirical Relationships.” Journal of the Brazilian Society of Mechanical Sciences and Engineering 40 (12): 555. doi:10.1007/s40430-018-1480-2.
   Web of Science ®Google Scholar
• Raja, Selvam, J. David, and I. Dinaharan. 2017. “In Situ Formation of ZrB2 Particulates and Their Influence on Microstructure and Tensile Behavior of AA7075 Aluminum Matrix Composites.” Engineering Science and Technology, an International Journal 20 (1): 187–196. doi:10.1016/j.jestch.2016.09.006.
   Google Scholar
• Rajan, HB, Michael, S. Ramabalan, I. Dinaharan, and S. J. Vijay. 2013. “Synthesis and Characterization of in Situ Formed Titanium Diboride Particulate Reinforced AA7075 Aluminum Alloy Cast Composites.” Materials & Design 44: 438–445. doi:10.1016/j.matdes.2012.08.008.
   Web of Science ®Google Scholar
• Rajan, T. P. D., R. M. Pillai, and B. C. Pai. 1998. “Reinforcement Coatings and Interfaces in Aluminium Metal Matrix Composites.” Journal of Materials Science 33 (14): 3491–3503. doi:10.1023/A:1004674822751.
   Web of Science ®Google Scholar
• Rajesh Ruban, S., L.D Wins, J. David Raja Selvam, and S.Rai Rajakumar. 2019. “Experimental Investigation and Characterization of in Situ Synthesized Sub Micron ZrB2-ZrC Particles Reinforced Hybrid AA6061 Aluminium Composite.” Materials Research Express 6 (10): 1–10.
   Web of Science ®Google Scholar
• Ravindran, P., K. Manisekar, P. Rathika, and P. Narayanasamy. 2013. “Tribological Properties of Powder metallurgy–Processed Aluminium Self Lubricating Hybrid Composites with SiC Additions.” Materials & Design 45: 561–570. doi:10.1016/j.matdes.2012.09.015.
   Web of Science ®Google Scholar
• Sahoo, A. K., S. Pradhan, and A. K. Rout. 2013. “Development and Machinability Assessment in Turning Al/SiCp-metal Matrix Composite with Multilayer Coated Carbide Insert Using Taguchi and Statistical Techniques.” Archives of Civil and Mechanical Engineering 13 (1): 27–35. doi:10.1016/j.acme.2012.11.005.
   Web of Science ®Google Scholar
• Senthi, P., T. Selvaraj, and K. Sivaprasad. 2013. “Influence of Turning Parameters on the Machinability of Homogenized Al–Cu/TiB2 in Situ Metal Matrix Composites.” The International Journal, Advanced Manufacturing Technology 67: 1589–1596. doi:10.1007/s00170-012-4592-3.
   Web of Science ®Google Scholar
• Shoba, Chintada, Nallu Ramanaiah, and Damera Nageswara Rao. 2015. “Influence of Dislocation Density on the Residual Stresses Induced while Machining Al/SiC/RHA Hybrid Composites.” Journal of Materials Research and Technology 4 (3): 273–277. doi:10.1016/j.jmrt.2014.12.010.
   Google Scholar
• Sun, Wei, Chun-zheng Duan, and Wen-dian Yin. 2021. “Chip Formation Mechanism in Machining of Al/SiCp Composites Based on Analysis of Particle Damage.” Journal of Manufacturing Processes 64: 861–877. doi:10.1016/j.jmapro.2021.02.032.
   Web of Science ®Google Scholar
• Suresh, P., K. Marimuthu, S. Ranganathan, and T. Rajmohan. 2014. “Optimization of Machining Parameters in Turning of Al-SiC-Gr Hybrid Metal Matrix Composites Using Grey-fuzzy Algorithm.” Transactions of Nonferrous Metals Society of China 243 (9): 2805–2814. doi:10.1016/S1003-6326(14)63412-9.
   Google Scholar
• Tomac, N., and K. Tannessen, F. 1992. “Rasch, Machinability of Particulate Aluminium Matrix Composites.” Annals of the ClRP 41/1.
   Google Scholar
• Uday, Dabade, A., Suhas S. Joshi, R. Balasubramaniam, and V. V. Bhanuprasad. 2007. “Surface Finish and Integrity of Machined Surfaces on Al/SiCp Composites.” Journal of Materials Processing Technology 192: 166–174.
   Web of Science ®Google Scholar
• Yashiro, Takeshi, Takayuki Ogawa, and Hiroyuki Sasahara. 2013. “Temperature Measurement of Cutting Tool and Machined Surface Layer in Milling of CFRP.” International Journal of Machine Tools & Manufacture 70: 63–69. doi:10.1016/j.ijmachtools.2013.03.009.
   Web of Science ®Google Scholar
• Zarezadeh, Mehrizi, M., and R. Beygi. 2018. “Direct Synthesis of Ti3AlC2-Al2O3 Nanocomposite by Mechanical Alloying.” Journal of Alloys and Compounds 740: 118–123. doi:10.1016/j.jallcom.2018.01.039.
   Web of Science ®Google Scholar