References
- Ahmad, F., F. Abbassi, M. k. Park, and J.-W. Jung. 2018. “Finite Element Analysis for the Evaluation of the Low-velocity Impact Response of a Composite Plate.” Advanced Composite Materials 28(3): 271-285.
- Ansari, M. M., A. Chakrabarti, and M. A. Iqbal. 2016. “Effects of Impactor and Other Geometric Parameters on Impact Behavior of FRP Laminated Composite Plate.” Modelling, Measurement and Control A 89 (1): 25–44.
- Cai, Z., Z. Li, J. Dong, and Z. Mao. 2016. “A Study on Protective Performance of Bullet-proof Helmet under Impact Loading.”Journal of Vibroengineering 18(4). DOI: 10.21595/jve.2015.16497
- Chen, Y., J. Zhang, B. Xu, Q. Chao, and G. Liu. 2019. “Multi-objective Optimization of Micron-scale Surface Textures for the Cylinder/valve Plate Interface in Axial Piston Pumps.” Tribology International 138: 316–329. doi:10.1016/j.triboint.2019.06.002.
- Forquin, P., L. Sallier, and C. Pontiroli. 2015. “A Numerical Study on the Influence of Free Water Content on the Ballistic Performances of Plain Concrete Targets.” Mechanics of Materials 89: 176–189. doi:10.1016/j.mechmat.2015.02.016.
- Forquin, P., L. Tran, P.-F. Louvigné, L. Rota, and F. Hild. 2003. “Effect of Aluminum Reinforcement on the Dynamic Fragmentation of SiC Ceramics.” International Journal of Impact Engineering 28 (10): 1061–1076. doi:10.1016/S0734-743X(03)00034-4.
- Forquin, P., and J.-L. Zinszner. 2017. “A Pulse-shaping Technique to Investigate the Behaviour of Brittle Materials Subjected to Plate-impact Tests.” Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 375 (2085): 20160333. doi:10.1098/rsta.2016.0333.
- Ibrahim, M. N., and M. A. I. Zakaria. 2020. “Dynamic Response of Al2024 T3 Aluminium Plate Subjected to Oblique Impact of 9mm Bullet Using Single Processor.” Research Progress in Mechanical and Manufacturing Engineering 1.1: 78–84.
- Orlowitz, E., AndersBrandt, and A. Brandt. 2017. “Comparison of Experimental and Operational Modal Analysis on a Laboratory Test Plate.” Measurement 102: 121–130. doi:10.1016/j.measurement.2017.02.001.
- Shayan, S., M. R. Barati, and M. Y. Tooski. 2021. “High Velocity Impact Response and Damage Mechanism of an Aluminium/Glass-Carbon Fiber/Epoxy Composite Plate Reinforced with Graphene Nano-plates.” Fibers and Polymers 22 (2): 480–488. doi:10.1007/s12221-021-0105-z.
- Sherif, M., H. Othman, H. Marzouk, and H. Aoude. 2020. “Design Guidelines and Optimization of Ultra-high-performance Fibre-reinforced Concrete Blast Protection Wall Panels.” International Journal of Protective Structures 11 (4): 494–514. doi:10.1177/2041419620912751.
- Tronskar, J., M. Mannan, and M. Lai. 2002. “Measurement of Fracture Initiation Toughness and Crack Resistance in Instrumented Charpy Impact Testing.” Engineering Fracture Mechanics 69 (3): 321–338. doi:10.1016/S0013-7944(01)00077-7.
- Wang, Y., H. Lin, Y. Zhao, X. Li, P. Guo, and Y. Liu. 2020. “Analysis of Fracturing Characteristics of Unconfined Rock Plate under Edge-on Impact Loading.” European Journal of Environmental and Civil Engineering 24 (14): 2453–2468. doi:10.1080/19648189.2018.1509021.