A sustainable ecofriendly additive manufacturing approach of repairing and coating on the substrate: cold spray

References

• Alkhimov, A.P., A.N. Papyrin, V.F. Kosarev, N.I. Nesterovich, and M.M. Shushpanov. 1994. “Gas-dynamic Spray Method for Applying a Coating.” US Patent 5,302,414. http://mi.mathnet.ru/dan49027
   Google Scholar
• Arabgol, Z., V.V. Maria, A. Hamid, F. Gärtner, and T. Klassen. 2017. “Influence of Thermal Properties and Temperature of Substrate on the Quality of Cold-sprayed Deposits.” Acta Materialia 127: 287–301. doi:10.1016/j.actamat.2017.01.040.
   Web of Science ®Google Scholar
• Assadi, H., F. Ga, T. Stoltenhoff, and H. Kreye. 2003. “Bonding Mechanism in Cold Gas Spraying.” Acta Materialia 51: 4379–4394. doi:10.1016/S1359-6454(03)00274-X.
   Web of Science ®Google Scholar
• Bae, G., Y. Xiong, S. Kumar, K. Kang, and C. Lee. 2008. “General Aspects of Interface Bonding in Kinetic Sprayed Coatings.” Acta Materialia 56: 4858–4868. doi:10.1016/j.actamat.2008.06.003.
   Web of Science ®Google Scholar
• Cavaliere, P., and A. Silvello. 2014. “Processing Parameters Affecting Cold Spray Coatings Performances.” International Journal of Advance Manufacturing Technology 71: 263–277. doi:10.1007/s00170-013-5465-0.
   Web of Science ®Google Scholar
• Faheem, A., F. Hasan, and Q. Murtaza. 2019. “Material Perspective and Deformation Pattern of Micro-sized Metal Particle Using Cold Gas Dynamic Spray.” In Advances in Computational Methods in Manufacturing, Lecture Notes on Multidisciplinary Industrial Engineering. Singapore: Springer. doi:10.1007/978-981-32-9072-3_34.
   Google Scholar
• Grujicic, M., J. R. Saylor, D. E. Beasley, W. S. Derosset, and D. Helfritch. 2003. “Computational Analysis of the Interfacial Bonding between Feed-powder Particles and the Substrate in the Cold-gas Dynamic-spray Process.” Applied Surface Science 219: 211–227. doi:10.1016/S0169-4332(03)00643-3.
   Web of Science ®Google Scholar
• Grujicic, M., L. Zhao, W.S. DeRosset, and D. Helfritch. 2004. “Adiabatic Shear Instability Based Mechanism for Particles/substrate Bonding in the Cold-gas Dynamic-spray Process.” Materials & Design 25: 681–688. doi:10.1016/j.matdes.2004.03.008.
   Web of Science ®Google Scholar
• Huang, G., H. Wang, X. Li, and L. Xing. 2017. “Study on the Growth of Holes in Cold Spraying via Numerical Simulation and Experimental Methods.” Coatings 7 (1). doi:10.3390/coatings7010002.
   Web of Science ®Google Scholar
• Jakupi, P., P.G. Keech, I. Barker, S. Ramamurthy, R.L. Jacklin, D.W. Shoesmith, and D.E. Moser. 2015. “Characterization of Commercially Cold Sprayed Copper Coatings and Determination of the Effects of Impacting Copper Powder Velocities.” Journal of Nuclear Materials 466: 1–15. doi:10.1016/j.jnucmat.2015.07.001.
   Web of Science ®Google Scholar
• Khodabakhshi, F., B. Marzbanrad, H. Jahed, and A.P. Gerlich. 2018. “Interfacial Bonding Mechanisms between Aluminum And Titanium during Cold Gas Spraying Followed by Friction-stir Modification.” Applied Surface Science 462: 739–752. doi:10.1016/j.apsusc.2018.08.156.
   Web of Science ®Google Scholar
• King, P.C., G. Bae, S. H. Zahiri, M. Jahedi, and C. Lee. 2010. “An Experimental and Finite Element Study of Cold Spray Copper Impact onto Two Aluminum Substrates.” Journal of Thermal Spray Technology 19: 620–634. doi:10.1007/s11666-009-9454-7.
   Web of Science ®Google Scholar
• Klassen, T., and H. Kreye. 2011. “On Parameter Selection in Cold Spraying.” Journal of Thermal Spray Technology 20: 1161–1176. doi:10.1007/s11666-011-9662-9.
   Web of Science ®Google Scholar
• Klinkov, S.V., and V. F. Kosarev. 2006. “Measurements of Cold Spray Deposition Efficiency.” Journal of Thermal Spray Technology 15: 364–371. doi:10.1361/105996306X124365.
   Web of Science ®Google Scholar
• Kumar, S., G. Bae, and C. Lee. 2016. “Influence of Substrate Roughness on Bonding Mechanism in Cold Spray.” Surface & Coating Technology 304: 592–605. doi:10.3390/met11122016.
   Web of Science ®Google Scholar
• Lek, J.Y., A. Bhowmik, A.W.-Y. Tan, W. Sun, X. Song, W. Zhai, P.J. Buenconsejo, et al. 2018. “Understanding the Microstructural Evolution of Cold Sprayed Ti-6Al-4V Coatings on Ti-6Al-4V Substrates.” Applied Surface Science 459: 492–504. doi:10.1016/j.apsusc.2018.07.175.
   Web of Science ®Google Scholar
• Li, C., and W. Li. 2003. “Deposition Characteristics of Titanium Coating in Cold Spraying.” Surface Coating Technology 167 (2): 278–283. doi:10.1016/S0257-8972(02)00919-2.
   Web of Science ®Google Scholar
• Li, W., H. Liao, C. Li, G. Li, C. Coddet, and X. Wang. 2006. “On High-velocity Impact of Micro-sized Metallic Particles in Cold Spraying.” Applied Surface Science 253: 2852–2862. doi:10.1016/j.apsusc.2006.05.126.
   Web of Science ®Google Scholar
• Li, W., S. Yin, X. Guo, H. Liao, X. Wang, and C. Coddet. 2012. “An Investigation on Temperature Distribution within the Substrate and Nozzle Wall in Cold Spraying by Numerical and Experimental Methods.” Journal of Thermal Spray Technology 21: 41–48. doi:10.1007/s11666-011-9685-2.
   Web of Science ®Google Scholar
• Lin, E., Q. Chen, O.C. Ozdemir, V.K. Champagne, and S. Müftü. 2019. “Effects of Interface Bonding on the Residual Stresses in Cold-Sprayed Al-6061: A Numerical Investigation.” Journal of Thermal Spray Technology 283: 472–483. doi:10.1007/s11666-019-00827-7.
   Google Scholar
• Ma, W., Y. Xie, C. Chen, H. Fukanuma, J. Wang, Z. Ren, and R. Huang. 2019. “Microstructural and Mechanical Properties of High-performance Inconel 718 Alloy by Cold Spraying.” Journal of Alloys and Compounds 792: 456–467. doi:10.1016/j.jallcom.2019.04.045.
   Web of Science ®Google Scholar
• Małachowska, A., M. Winnicki, M. Stachowicz, and M. Korzeniowski. 2018. “Metallisation of Polycarbonates Using a Low Pressure Cold Spray Method.” Surface Engineering 343: 251–258. doi:10.1080/02670844.2016.1277843.
   Google Scholar
• Meng, F., S. Yue, and J. Song. 2015. “Quantitative Prediction of Critical Velocity and Deposition Efficiency in Cold-spray: A Finite-element Study.” Scripta Materialia 107: 83–87. doi:10.1016/j.scriptamat.2015.05.026.
   Web of Science ®Google Scholar
• Moridi, A., M. Azadi, and G. H. Farrahi. 2014. “Surface & Coatings Technology Thermo-mechanical Stress Analysis of Thermal Barrier Coating System considering Thickness and Roughness Effects.” Surface and Coating Technology 243: 91–99. doi:10.1016/j.surfcoat.2012.02.019.
   Web of Science ®Google Scholar
• Murray, J.W., M.V. Zuccoli, and T. Hussain. 2018. “Heat Treatment of Cold-Sprayed C355 Al for Repair: Microstructure and Mechanical Properties.” Journal of Thermal Spray Technology 27: 159–168. doi:10.1007/s11666-017-0665-z.
   Web of Science ®Google Scholar
• Murtaza, Q., J. Stokes, and M. Ardhaoui. 2012. “Experimental Analysis of Spray Dryer Used in Hydroxyapatite Thermal Spray Powder.” Journal of Thermal Spray Technology 21: 963–974. doi:10.1007/s11666-012-9791-9.
   Web of Science ®Google Scholar
• Petrovskiy, P., A. Sova, M. Doubenskaia, and I. Smurov. 2019. “Influence of Hot Isostatic Pressing on Structure and Properties of Titanium Cold-spray Deposits.” International Journal of Advance Manufacturing Technology 102: 819–827. doi:10.1007/s00170-018-03233-5.
   Web of Science ®Google Scholar
• Sinica, A.M., E. Letters, and T. Beijing. 2011. “Numerical Investigation of the Rebounding and the Deposition Behavior of Particles during Cold Spraying.” Acta Metallurgica sinica 24 (1): 43–53. doi:10.11890/1006-7191-111-43.
   Web of Science ®Google Scholar
• Sirvent, P., M.A. Garrido, C.J. Múnez, P. Poza, and S. Vezzù. 2018. “Effect of Higher Deposition Temperatures on the Microstructure and Mechanical Properties of Al 2024 Cold Sprayed Coatings.” Surface and Coating Technology 337: 461–470. doi:10.1016/j.surfcoat.2018.01.055.
   Web of Science ®Google Scholar
• Song, J., J. Liu, Q. Chen, and K. Li. 2017. “Effect of the Shape Factor on the Cold-Spraying Dynamic Characteristics of Sprayed Particles.” Journal of Thermal Spray Technology 268: 1851–1858. doi:10.1007/s11666-017-0616-8.
   Google Scholar
• Sova, A., I. Smurov, M. Doubenskaia, and P. Petrovskiy. 2018b. “Deposition of Aluminum Powder by Cold Spray Micronozzle.” International Journal of Advance Manufacturing Technology 95: 3745–3752. doi:10.1007/s00170-017-1443-2.
   Web of Science ®Google Scholar
• Sova, A., M. Doubenskaia, P. Petrovskiy, and I. Smurov. 2018a. “Visualisation of Particle Jet in Cold Spray by Infrared Camera: Feasibility Tests.” International Journal of Advance Manufacturing Technology, no. 95: 3057–3063. doi:10.1007/s00170-017-1435-2.
   Google Scholar
• Srikanth, A., and V. Bolleddu. 2020. “A Review on Characteristics of Cold Sprayed Coatings.” Australian Journal of Mechanical Engineering. doi:10.1080/14484846.2020.1794504.
   Web of Science ®Google Scholar
• Suhas, P., N.L. Vaishak, and J. D. Quadros. 2017. “Dry Sliding Wear Behavior of AA 7075 Reinforced Short Coated Carbon Metal Matrix Composites.” Journal of Advance Manufacturing Technology 11: 115–126. https://jamt.utem.edu.my/jamt/article/view/1627
   Google Scholar
• Sun, C., X. Zhou, and C. Xie. 2019. “Effect of Processing Conditions on Al-based Amorphous/nanocrystalline Coating by Cold-spraying.” Surface and Coating Technology 362: 97–104. doi:10.1016/j.surfcoat.2019.01.096.
   Web of Science ®Google Scholar
• Yeom, H., T. Dabney, G. Johnson, B. Maier, M. Lenling, and K. Sridharan. 2019. “Improving Deposition Efficiency in Cold Spraying Chromium Coatings by Powder Annealing.” International Journal of Advance Manufacturing Technology 100: 1373–1382. doi:10.1007/s00170-018-2784-1.
   Web of Science ®Google Scholar
• Yin, S., X. Suo, H. Liao, Z. Guo, and X. Wang. 2014. “Significant Influence of Carrier Gas Temperature during the Cold Spray Process.” Surface Engineering 30 (6): 443–450. doi:10.1179/1743294414Y.0000000276.
   Web of Science ®Google Scholar
• Yin, S., X. Suo, Y. Xie, W. Li, and R. Lupoi. 2015. “Effect of Substrate Temperature on Interfacial Bonding for Cold Spray of Ni onto Cu.” Journal of Materials Science 50 (22): 7448–7457. doi:10.1007/s10853-015-9304-6.
   Web of Science ®Google Scholar
• Yin, S., X. Wang, X. Suo, H. Liao, Z. Guo, and W. Li. 2013. “Deposition Behavior of Thermally Softened Copper Particles in Cold Spraying.” Acta Materialia 61 (14): 5105–5118. doi:10.1016/j.actamat.2013.04.041.
   Web of Science ®Google Scholar
• Yu, M., M.Y. Ding, M.Y.H. Ma, and H.L. Liao. 2019. “Microstructure and Corrosion Behavior of Cold-Sprayed Aluminum Alloy/Inconel Composite Coatings.” Journal of Thermal Spray Technology 283: 460–471. doi:10.1007/s11666-018-0817-9.
   Google Scholar
• Yu, M., W. Li, F. F. Wang, X. K. Suo, and H. L Liao. 2013. “Effect of Particle and Substrate Pre-heating on Particle Deformation Behavior in Cold Spraying.” Surface& Coating Technology 220: 174–178. doi:10.1016/j.surfcoat.2012.04.081.
   Web of Science ®Google Scholar