Influence of tempering conditions on the microstructure and mechanical properties of nodular cast iron

References

• Aristizabal, R., R. Foley, and A. Druschitz. 2012. “Intercritically Austenitized Quenched and Tempered Ductile Iron.” International Journal of Metalcasting 6: 7–14. doi:10.1007/BF03355534.
   Web of Science ®Google Scholar
• Bharathi, B. Mohan, R. Vaira Vignesh, R. Padmanaban, and M. Govindaraju. 2020. “Effect of Friction Stir Processing and Heat Treatment on the Corrosion Properties of AZ31 Alloy.” Australian Journal of Mechanical Engineering. doi:10.1080/14484846.2020.1815999.
   Web of Science ®Google Scholar
• Boccardo, A.D., N. Catalán, D.J. Celentano, and E. Ramos-Moore. 2021. “A Thermo-metallurgical Model for Laser Surface Engineering Treatment of Nodular Cast Iron.” Metallurgical and Materials Transactions B 52: 854–870. doi:10.1007/s11663-021-02058-0.
   Web of Science ®Google Scholar
• Bradley, W. L., and M. N. Srinivasan. 1990. “Fracture and Fracture Toughness of Cast Irons.” International Materials Reviews 35 (1): 129–161. doi:10.1179/095066090790324028.
   Web of Science ®Google Scholar
• Chakrabarty, Indrajit. 2019. “Characteristic Properties and Development of Microstructures by Heat Treatment of Unalloyed and Low-Alloyed Cast Irons.” Reference Module in Materials Science and Materials Engineering. doi:10.1016/B978-0-12-803581-8.10091-8.
   Google Scholar
• Dewangan, Saurabh, Neha Mainwal, Manwi Khandelwal, and Prateek Sunil Jadhav. 2019. “Performance Analysis of Heat Treated AISI 1020 Steel Samples on the Basis of Various Destructive Mechanical Testing and Microstructural Behaviour.” Australian Journal of Mechanical Engineering 1–14. doi:10.1080/14484846.2019.1664212.
   Web of Science ®Google Scholar
• Dueñas, J.R., W. Hormaza, and G.M. Castro Güiza. 2019. “Abrasion Resistance and Toughness of a Ductile Iron Produced by Two Molding Processes with a Short Austempering.” Journal of Materials Research and Technology 8 (3): 2605–2612. doi:10.1016/j.jmrt.2019.02.014.
   Google Scholar
• Elsayed, Ayman H., M.M. Megahed, A.A. Sadek, and K.M. Abouelela. 2009. “Fracture Toughness Characterization of Austempered Ductile Iron Produced Using Both Conventional and Two-step Austempering Processes.” Materials and Design 30: 1866–1877. doi:10.1016/j.matdes.2008.09.013.
   Web of Science ®Google Scholar
• Erdogan, M., M. Cerah, and K. Kocatepe. 2006. “Influence of Intercritical Austenitising, Tempering Time and Martensite Volume Fraction on the Tensile Properties of Ferritic Ductile Iron with Dual Matrix Structure.” International Journal of Cast Metals Research 19 (4): 248–253. doi:10.1179/136404606225023498.
   Web of Science ®Google Scholar
• Fernandino, D.O., and R. Boeri. 2015. “Fracture of Pearlitic Ductile Cast Iron under Different Loading Conditions.” Fatigue & Fracture of Engineering Materials & Structures 38: 80–90. doi:10.1111/ffe.12220.
   Web of Science ®Google Scholar
• Gonzaga, R.A. 2013. “Influence of Ferrite and Pearlite Content on Mechanical Properties of Ductile Cast Irons.” Materials Science and Engineering A 567: 1–8. doi:10.1016/j.msea.2012.12.089.
   Web of Science ®Google Scholar
• Górny, M., and E. Tyrała. 2013. “Effect of Cooling Rate on Microstructure and Mechanical Properties of Thin-Walled Ductile Iron Castings.” Journal of Materials Engineering and Performance 22: 300–305. doi:10.1007/s11665-012-0233-0.
   Web of Science ®Google Scholar
• Hafiz, M. 2001. “Mechanical Properties of SG-iron with Different Matrix Structure.” Journal of Materials Science 36: 1293–1300. doi:10.1023/A:1004866817049.
   Web of Science ®Google Scholar
• Kocatepe, K., M. Cerah, and M. Erdogan. 2007. “The Tensile Fracture Behaviour of Intercritically Annealed and Quenched + Tempered Ferritic Ductile Iron with Dual Matrix Structure.” Journal of Materials & Design 28: 72–181. doi:10.1016/j.matdes.2005.04.012.
   Web of Science ®Google Scholar
• Krauss, George. 2015. STEELS Processing, Structure and Performance. 2nd ed. U.S.A: ASM.
   Google Scholar
• Kruthiventi, S., K.G. Basavakumar, S. Nambala, G. Subramanyacharyulu. 2014. “Influence of Heat Treatment on Microstructural and Mechanical Properties of Nodular Cast Iron.” Journal of the Institution of Engineers (India): Series D 95: 75–79. doi:10.1007/s40033-014-0036-6.
   Google Scholar
• Lacaze, J., A. Boudot, V. Gerval, D. Oquab, and H. Santos. 1997. “He Role of Manganese and Copper in the Eutectoid Transformation of Spheroidal Graphite Cast Iron.” Metallurgical and Materials Transactions A 28: 2015–2025. doi:10.1007/s11661-997-0158-7.
   Web of Science ®Google Scholar
• Li, Yongjian, Shiyun Dong, Peng He, Shixing Yan, Enzhong Li, Xiaoting Liu, and Binshi Xu. 2019. “Microstructure Characteristics and Mechanical Properties of New-type FeNiCr Laser Cladding Alloy Coating on Nodular Cast Iron.” Journal of Materials Processing Technology 269: 163–171. doi:10.1016/j.jmatprotec.2019.02.010.
   Web of Science ®Google Scholar
• Medyński, D., and A. Janus. 2018. “Effect of Heat Treatment Parameters on Abrasive Wear and Corrosion Resistance of Austenitic Nodular Cast Iron Ni-Mn-Cu.” Archives of Civil and Mechanical Engineering 18: 515–521. doi:10.1016/j.acme.2017.08.001.
   Web of Science ®Google Scholar
• Megahed, Hassan, Emad El-Kashif, Ahmed Y. Shash, and Mahmoud A. Essam. 2019. “Effect of Holding Time, Thickness and Heat Treatment on Microstructure and Mechanical Properties of Compacted Graphite Cast Iron.” Journal of Materials Research and Technology 8 (1): 1188–1196. doi:10.1016/j.jmrt.2018.07.021.
   Google Scholar
• Monchoux, J.P., C. Verdu, and R. Fougeres. 2000. “Effect of a Ferritization Heat Treatment on the Fracture Toughness of Ferritic Spheroidal Graphite Cast Iron.” Scripta Materialia 42: 1047–1052. doi:10.1016/S1359-6462(00)00336-5.
   Web of Science ®Google Scholar
• Monchoux, J.P., C. Verdu, G. Thollet, R. Fougers, and A. Reynaud. 2001. “Morphological Changes of Graphite Spheroids during Heat Treatment of Ductile Cast Irons.” Acta Materialia 49: 4355–4362. doi:10.1016/S1359-6454(01)00230-0.
   Web of Science ®Google Scholar
• Muhmond, H.M. 2020. “Diffusion Phenomena between Steel and Cast Iron in the Melt and during Solidification.” Transactions of the Indian Institute of Metals 73: 811–819. doi:10.1007/s12666-020-01899-8.
   Web of Science ®Google Scholar
• Murcia, S.C., M.A. Paniagua, and E.A. Ossa. 2013. “Development of As-cast Dual Matrix Structure (DMS) Ductile Iron.” Materials Science and Engineering A 566: 8–15. doi:10.1016/j.msea.2012.12.033.
   Web of Science ®Google Scholar
• Murkute, Pratik, Somayeh Pasebani, and O. Burkan Isgor. 2020. “Effects of Heat Treatment and Applied Stresses on the Corrosion Performance of Additively Manufactured Super Duplex Stainless Steel Clads.” Materialia 14: 100878. doi:10.1016/j.mtla.2020.100878.
   Google Scholar
• Okabayashi, K., M. Kawamoto, A. Ikenaga, and M. Tsujikawa. 1982. Trans Jpn Foundrymen’s Society, 37–41. Transactions of Foundrymen’s Society.
   Google Scholar
• Putatunda, Susil K. 2010. “Comparison of the Mechanical Properties of Austempered Ductile Cast Iron (ADI) Processed by Conventional and Step-Down Austempering Process.” Materials and Manufacturing Processes 25 (8): 749–757. doi:10.1080/10426910903367394.
   Web of Science ®Google Scholar
• Qing, Jingjing, Simon Lekakh, Mingzhi Xu, and Daniel Field. 2021. “Formation of Complex Nuclei in Graphite Nodules of Cast Iron.” Carbon 171: 276–288. doi:10.1016/j.carbon.2020.08.022.
   Web of Science ®Google Scholar
• Rao, P. Prasad, and S.K. Putatunda. 2003. “Investigations on the Fracture Toughness of Austempered Ductile Irons Austenitized at Different Temperatures.” Materials Science and Engineering A 349: 136–149. doi:10.1016/S0921-5093(02)00633-0.
   Web of Science ®Google Scholar
• Tadesse, A., and H. Fredriksson. 2018. “On the Solidification and Structure Formation during Casting of Large Inserts in Ferritic Nodular Cast Iron.” Metallurgical and Materials Transactions B 49: 1223–1235. doi:10.1007/s11663-018-1221-z.
   Web of Science ®Google Scholar
• Toktas, G., M. Tayanc, and A. Toktas. 2006. “Effect of Matrix Structure on the Impact Properties of an Alloyed Ductile Iron.” Materials Characterization 52: 290–299. doi:10.1016/j.matchar.2006.02.008.
   Google Scholar
• Walton, Charles F, and Timothy J Opar. 1981. Iron Castings Handbook. 1st ed. Iron Castings Society.
   Google Scholar
• Wang, Bingxu, Gary C. Barber, Chuanlin Tao, Xichen Sun, and Xu Ran. 2018. “Characteristics of Tempering Response of Austempered Ductile Iron.” Journal of Materials Research and Technology 7 (2): 198–202. doi:10.1016/j.jmrt.2017.08.011.
   Google Scholar
• Zhang, Kun, Wen Hao Kan, Yang Liu, Xiang Gao, Yuman Zhu, Samuel Chao Voon Lim, Huizhi Peng, and Aijun Huang. 2021. “Microstructure Control by Heat Treatment for Better Ductility and Toughness of Ti-6Al-4V Produced by Laser Powder Bed Fusion.” Australian Journal of Mechanical Engineering 1–12. doi:10.1080/14484846.2021.2004654.
   Web of Science ®Google Scholar
• Zimba, J., D. J. Simbi, T. Chandra, and E. Navara. 2004. “A Dilatometry Study of the Austenitization and Cooling Behavior of Ductile Iron Meant for the Production of Austempered Ductile Iron (ADI).” Materials and Manufacturing Processes 19 (5): 907–920. doi:10.1081/AMP-200030644.
   Web of Science ®Google Scholar