Improvement of part strength prediction modelling by artificial neural networks for filament and pellet based additively manufactured parts

References

• Afonso, João Araújo, Jorge Lino Alves, Gabriela Caldas, Barbara Perry Gouveia, Leonardo Santana, and Jorge Belinha. 2021. “Influence of 3D Printing Process Parameters on the Mechanical Properties and Mass of PLA Parts and Predictive Models.” Rapid Prototyping Journal 27 (3): 487–495. doi:10.1108/RPJ-03-2020-0043. Emerald Publishing Limited.
   Web of Science ®Google Scholar
• Asokan, P., R. Ravi Kumar, R. Jeyapaul, and M. Santhi. 2008. “Development of Multi-Objective Optimization Models for Electrochemical Machining Process.” International Journal of Advanced Manufacturing Technology 39 (1–2): 55–63. doi:10.1007/s00170-007-1204-8.
   Web of Science ®Google Scholar
• Azadi Moghaddam, M, R Golmezergi, and F Kolahan. 2016. “Multi-Variable Measurements and Optimization of GMAW Parameters for API-X42 Steel Alloy Using a Hybrid BPNN–PSO Approach.” Measurement 92: 279–287. doi:10.1016/j.measurement.2016.05.049.
   Web of Science ®Google Scholar
• Chohan, Jasgurpreet S, Nitin Mittal, Raman Kumar, Sandeep Singh, Shubham Sharma, Jujhar Singh, Kalagadda V Rao, Mozammel Mia, Danil Y Pimenov, and Shashi P Dwivedi. 2020. “Mechanical Strength Enhancement of 3D Printed Acrylonitrile Butadiene Styrene Polymer Components Using Neural Network Optimization Algorithm.” Polymers 12 (10): 2250. doi:10.3390/polym12102250.
   PubMed Web of Science ®Google Scholar
• Conner, Brett P., Guha P. Manogharan, Ashley N. Martof, Lauren M. Rodomsky, Caitlyn M. Rodomsky, Dakesha C. Jordan, James W. Limperos et al. 2014 .“Making Sense of 3-D Printing: Creating a Map of Additive Manufacturing Products and Services.” Additive Manufacturing 1: 64–76. doi:10.1016/j.addma.2014.08.005.
   Web of Science ®Google Scholar
• Gupta, Ashutosh Kumar, and Mohammad Taufik . 2021. “Effect of Process Variables on Performances Measured in Filament and Pellet Based Extrusion Process.” International Conference on Sustainable materials, Manufacturing and Renewable Technologies. 23-24 April 2021, kerala, India. Materials Today: Proceedings, 47: 5177–5184. doi:10.1016/j.matpr.2021.05.508.
   Google Scholar
• ISO/ASTM. 2013. “Additive Manufacturing - General Principles Terminology (ASTM52900).” Rapid Manufacturing Association 10–12. doi:10.1520/F2792-12A.2.
   Google Scholar
• Jain, Prashant K, Pulak M Pandey, and P V M Rao. 2008. “Experimental Investigations for Improving Part Strength in Selective Laser Sintering.” Virtual and Physical Prototyping 3 (3): 177–188. doi:10.1080/17452750802065893. Taylor & Francis.
   Google Scholar
• Khosravani, Mohammad Reza, and Tamara Reinicke. 2021. “Fracture Behavior of Intact and Defected 3D-Printed Parts.” Procedia Structural Integrity 31: 105–110. doi:10.1016/j.prostr.2021.03.017.
   Google Scholar
• Kumar, Narendra, Prashant K Jain, Puneet Tandon, and Pulak Mohan Pandey. 2018a. “The Effect of Process Parameters on Tensile Behavior of 3D Printed Flexible Parts of Ethylene Vinyl Acetate (EVA).” Journal of Manufacturing Processes 35: 317–326. doi:10.1016/j.jmapro.2018.08.013.
   Web of Science ®Google Scholar
• Kumar, Narendra, Prashant K Jain, Puneet Tandon, and Pulak Mohan Pandey. 2018b. “Investigation on the Effects of Process Parameters in CNC Assisted Pellet Based Fused Layer Modeling Process.” Journal of Manufacturing Processes 35: 428–436. doi:10.1016/j.jmapro.2018.08.029.
   Web of Science ®Google Scholar
• Kumar, Narendra, Prashant K. Jain, Puneet Tandon, and Pulak M. Pandey. 2019. “Investigations on the Melt Flow Behaviour of Aluminium Filled ABS Polymer Composite for the Extrusion-Based Additive Manufacturing Process.” International Journal of Materials & Product Technology 59 (3): 194–211. doi:10.1504/IJMPT.2019.102931.
   Web of Science ®Google Scholar
• Lee, S H, W S Park, H S Cho, W Zhang, and M C Leu. 2001. “A Neural Network Approach to the Modelling and Analysis of Stereolithography Processes.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 215 (12): 1719–1733. doi:10.1177/095440540121501206. IMECHE.
   Web of Science ®Google Scholar
• Mahmood, Muhammad A, Anita I Visan, Carmen Ristoscu, and Ion N Mihailescu. 2021. “Artificial Neural Network Algorithms for 3D Printing.” Materials. doi:10.3390/ma14010163.
   PubMedGoogle Scholar
• Mohamed, Omar Ahmed, Syed Hasan Masood, and Jahar Lal Bhowmik. 2021. “Modeling, Analysis, and Optimization of Dimensional Accuracy of FDM-Fabricated Parts Using Definitive Screening Design and Deep Learning Feedforward Artificial Neural Network.” Advances in Manufacturing 9 (1): 115–129. doi:10.1007/s40436-020-00336-9.
   Web of Science ®Google Scholar
• Mohammad, Taufik, and Prashant K. Jain. 2016. “A Study of Build Edge Profile for Prediction of Surface Roughness in Fused Deposition Modeling.” Journal of Manufacturing Science and Engineering, Transactions of the ASME 138 (6): 1–11. doi:10.1115/1.4032193.
   Web of Science ®Google Scholar
• Mohammad, Taufik, and Prashant K. Jain. 2020. “Part Surface Quality Improvement Studies in Fused Deposition Modelling Process: A Review.” Australian Journal of Mechanical Engineering 1–25. doi:10.1080/14484846.2020.1723342. Taylor & Francis.
   Web of Science ®Google Scholar
• Mohan, N, P Senthil, S Vinodh, and N Jayanth. 2017. “A Review on Composite Materials and Process Parameters Optimisation for the Fused Deposition Modelling Process.” Virtual and Physical Prototyping 12 (1): 47–59. doi:10.1080/17452759.2016.1274490. Taylor & Francis.
   Web of Science ®Google Scholar
• Ngo, Tuan D, Alireza Kashani, Gabriele Imbalzano, Kate T Q Nguyen, and David Hui. 2018. “Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications and Challenges.” Composites Part B: Engineering 143: 172–196. doi:10.1016/j.compositesb.2018.02.012.
   Web of Science ®Google Scholar
• Panda, Samir Kumar, Saumyakant Padhee, Anoop Kumar SOOD, and S. S. Mahapatra. 2009. “Optimization of Fused Deposition Modelling (FDM) Process Parameters Using Bacterial Foraging Technique.” Intelligent Information Management 01 (2): 89–97. doi:10.4236/iim.2009.12014.
   Google Scholar
• Plaza, García, Pedro J Núñez López Eustaquio, Miguel Á Caminero Torija, and Jesús M Chacón Muñoz. 2019. “Analysis of PLA Geometric Properties Processed by FFF Additive Manufacturing: Effects of Process Parameters and Plate-Extruder Precision Motion.” Polymers. doi:10.3390/polym11101581.
   Google Scholar
• Rajpurohit, Shilpesh R, and Harshit K Dave. 2019. “Analysis of Tensile Strength of a Fused Filament Fabricated PLA Part Using an Open-Source 3D Printer.” The International Journal of Advanced Manufacturing Technology 101 (5): 1525–1536. doi:10.1007/s00170-018-3047-x.
   Web of Science ®Google Scholar
• Reddy, B. V., N. V. Reddy, and A. Ghosh. 2007. “Fused Deposition Modelling Using Direct Extrusion.” Virtual and Physical Prototyping 2 (1): 51–60. doi:10.1080/17452750701336486.
   Google Scholar
• Samykano, M, S K Selvamani, K Kadirgama, W K Ngui, G Kanagaraj, and K Sudhakar. 2019. “Mechanical Property of FDM Printed ABS: Influence of Printing Parameters.” The International Journal of Advanced Manufacturing Technology 102 (9): 2779–2796. doi:10.1007/s00170-019-03313-0.
   Web of Science ®Google Scholar
• Shamisi, Al, H. Maitha, H. Ali, and A. N. Hejase Hassan. 2011. “Using MATLAB to Develop Artificial Neural Network Models for Predicting Global Solar Radiation in Al Ain City – UAE.” Engineering Education and Research Using MATLAB. doi:10.5772/25213.
   Google Scholar
• Sood, Anoop K, Raj K Ohdar, and Siba S Mahapatra. 2012. “Experimental Investigation and Empirical Modelling of FDM Process for Compressive Strength Improvement.” Journal of Advanced Research 3 (1): 81–90. doi:10.1016/j.jare.2011.05.001.
   Google Scholar
• Srinivasan, R, T Pridhar, L S Ramprasath, N Sree Charan, and W Ruban. 2020. “Prediction of Tensile Strength in FDM Printed ABS Parts Using Response Surface Methodology (RSM).” 1st International Conference on Advanced Light-weight Materials and Structures, 6–7 March 2020, Hyderabad, India. Materials Today: Proceedings 27: 1827–1832. 10.1016/j.matpr.2020.03.788.
   Google Scholar
• Taufik, Mohammad, and Prashant K Jain. 2017. “Laser Assisted Finishing Process for Improved Surface Finish of Fused Deposition Modelled Parts.” Journal of Manufacturing Processes 30: 161–177. doi:10.1016/j.jmapro.2017.09.020.
   Web of Science ®Google Scholar
• Taufik, Mohammad, and Prashant K Jain. 2021 . “On the Achieving Uniform Finishing Allowance through Identifying Shape Deviation for Additive Manufacturing.” Australian Journal of Mechanical Engineering, 1–19. doi:10.1080/14484846.2021.1873067.
   Web of Science ®Google Scholar
• Tuntas, Remzi, and Burak Dikici. 2015. “An Investigation on the Aging Responses and Corrosion Behaviour of A356/SiC an Investigation on the Aging Responses and Corrosion Behaviour of A356/SiC Composites by Neural Network : The Effect of Cold Working Ratio.“ Journal of Composite Materials 50 (17): 23–35. doi:10.1177/0021998315602950.
   Web of Science ®Google Scholar
• Wang, Ruoli, and Elena M Gutierrez-Farewik. 2009 “The Effect of Excessive Subtalar Inversion/Eversion on the Dynamic Function of the Soleus and Gastrocnemius during the Stance Phase.” Proceedings of the ASME Summer Bioengineering Conference 2009, SBC2009. June 17–21, 2009, Lake Tahoe, California, USA. doi:10.1115/SBC2009-206242.
   Google Scholar
• Wang, Zhi, Li Jing, Wu Wenjie, Daijun Zhang, and Yu. Ning. 2021. “Multitemperature Parameter Optimization for Fused Deposition Modeling Based on Response Surface Methodology.” AIP Advances 11 (5): 55315. doi:10.1063/5.0049357. American Institute of Physics.
   Web of Science ®Google Scholar
• Wool R P, Yuan B and McGarel O J. 1989.“Welding of polymer interfaces“ Polym. Eng. Sci 29 (19): 1340–1367. doi:10.1002/pen.760291906.
   Web of Science ®Google Scholar
• Xinbo, Qi, Guofeng Chen, Li Yong, Xuan Cheng, and Li. Changpeng. 2019. “Applying Neural-Network-Based Machine Learning to Additive Manufacturing: Current Applications, Challenges, and Future Perspectives.” Engineering 5 (4): 721–729. doi:10.1016/j.eng.2019.04.012.
   Web of Science ®Google Scholar
• Zafari, Abedin, Mohammad Hossein Kianmehr, and Rahman Abdolahzadeh. 2013. “Modeling the Effect of Extrusion Parameters on Density of Biomass Pellet Using Artificial Neural Network.” International Journal of Recycling of Organic Waste in Agriculture 2 (1): 1–11. doi:10.1186/2251-7715-2-9.
   Google Scholar
• Zhang, Binbin, Prakhar Jaiswal, Rahul Rai, Paul Guerrier, and George Baggs. 2019. “Convolutional Neural Network-Based Inspection of Metal Additive Manufacturing Parts.” Rapid Prototyping Journal 25 (3): 530–540. doi:10.1108/RPJ-04-2018-0096. Emerald Publishing Limited.
   Web of Science ®Google Scholar