Characterization of drilling damage in glass laminate composites using lock-in thermography nondestructive evaluation method: a feasibility study

References

• Al-Athel, K. S., A. S. Alomari, A. F. M. Arif, F. A. Alsulaiman, and M. H. Malik. 2019. “Damage Characterization Using Thermography of Composite Plates Subjected to Low Velocity Impact Loads.” Journal of Material Sciences & Engineering 8 (4): 1–16.
   Google Scholar
• Babu, J., T. Sunny, N. A. Paul, K. P. Mohan, J. Philip, and J. P. Davim. 2016. “Assessment of Delamination in Composite Materials: A Review.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 230 (11): 1990–2003. doi:10.1177/0954405415619343.
   Web of Science ®Google Scholar
• Chatterjee, K., and S. Tuli. 2012. “Image Enhancement in Transient Lock-In Thermography Through Time Series Reconstruction and Spatial Slope Correction.” IEEE Transactions on Instrumentation and Measurement 61 (4): 1079–1089. doi:10.1109/TIM.2011.2174095.
   Web of Science ®Google Scholar
• Chen, X., R. Janeliukstis, and A. Sarhadi. 2022. “Thermographic Data Analytics-Based Damage Characterization in a Large-Scale Composite Structure Under Cyclic Loading.” Composite structures 290 (March): 115525. doi:10.1016/j.compstruct.2022.115525.
   Google Scholar
• Delanthabettu, S., M. Menaka, B. Venkatraman, and B. Raj. 2015. “Defect Depth Quantification Using Lock-In Thermography.” Quantitative Infrared Thermography Journal 12 (1): 37–52. doi:10.1080/17686733.2015.1013663.
   Web of Science ®Google Scholar
• De Rosa, I. M., C. Santulli, F. Sarasini, and M. Valente. 2009. “Post-Impact Damage Characterization of Hybrid Configurations of Jute/Glass Polyester Laminates Using Acoustic Emission and IR Thermography.” Composites Science and Technology 69 (7–8): 1142–1150. doi:10.1016/j.compscitech.2009.02.011.
   Web of Science ®Google Scholar
• Durão, L. M. P., J. M. R. S. Tavares, V. H. C. de Albuquerque, and D. J. S. Gonçalves. 2013. “Damage Evaluation of Drilled Carbon/Epoxy Laminates Based on Area Assessment Methods.” Composite structures 96: 576–583. doi:10.1016/j.compstruct.2012.08.003.
   Web of Science ®Google Scholar
• Ekanayake, S., S. Gurram, and R. H. Schmitt. 2018. “Depth Determination of Defects in CFRP-Structures Using Lock-In Thermography.” Composites Part B: Engineering 147 (April): 128–134. doi:10.1016/j.compositesb.2018.04.032.
   Google Scholar
• Fu, R., Z. Jia, F. Wang, Y. Jin, D. Sun, L. Yang, and De Cheng. 2018. “Drill-Exit Temperature Characteristics in Drilling of UD and MD CFRP Composites Based on Infrared Thermography.” International Journal of Machine Tools & Manufacture 135 (August): 24–37. doi:10.1016/j.ijmachtools.2018.08.002.
   Google Scholar
• Grammatikos, S. A., E. Z. Kordatos, T. E. Matikas, and A. S. Paipetis. 2018. “On the Fatigue Response of a Bonded Repaired Aerospace Composite Using Thermography.” Composite structures 188: 461–469. doi:10.1016/j.compstruct.2018.01.035.
   Web of Science ®Google Scholar
• Jinlong, G., L. Junyan, W. Fei, and W. Yang. 2015. “Inverse Heat Transfer Approach for Nondestructive Estimation the Size and Depth of Subsurface Defects of CFRP Composite Using Lock-In Thermography.” Infrared Physics and Technology 71: 439–447. doi:10.1016/j.infrared.2015.06.005.
   Web of Science ®Google Scholar
• John, K. M., and S. Thirumalai Kumaran. 2020. “Backup Support Technique Towards Damage-Free Drilling of Composite Materials: A Review.” International Journal of Lightweight Materials and Manufacture 3 (4): 357–364. doi:10.1016/j.ijlmm.2020.06.001.
   Google Scholar
• Lopez-Arraiza, A., I. Amenabar, A. Agirregomezkorta, M. Sarrionandia, and J. Aurrekoetxea. 2012. “Experimental Analysis of Drilling Damage in Carbon-Fiber Reinforced Thermoplastic Laminates Manufactured by Resin Transfer Molding.” Journal of Composite Materials 46 (6): 717–725. doi:10.1177/0021998311414218.
   Web of Science ®Google Scholar
• Ólafsson, G., R. C. Tighe, S. W. Boyd, and J. M. Dulieu-Barton. 2022. “Lock-In Thermography Using Miniature Infra-Red Cameras and Integrated Actuators for Defect Identification in Composite Materials.” Optics and Laser Technology 147 (June 2021). doi:10.1016/j.optlastec.2021.107629.
   PubMedGoogle Scholar
• Otsu, N. 1979. “A Threshold Selection Method from Gray-Level Histograms.” IEEE Transactions on Systems, Man, and Cybernetics 9 (1): 62–66.
   Web of Science ®Google Scholar
• Palumbo, D. 2019. “On the Thickness Quantification of Composite Materials by Using Lock-In Thermography.” Materials (Basel) 12 (7): 1185. doi:10.3390/ma12071185.
   PubMed Web of Science ®Google Scholar
• San Juan, M., O. Martín, F. J. Santos, P. De Tiedra, and A. Sánchez. 2012. “Approach to the Study of Workpiece Damage in Drilling of Carbon Fiber Composites by Using Thermography Ir.” Advanced Materials Research 498: 43–48. https://www.scientific.net/AMR.498.43
   Google Scholar
• Sharath, D., M. Menaka, and B. Venkatraman. 2021. “Image Definition and Defect Sizing in Lock-In Thermography: An Experimental Investigation.” Experimental Techniques 46 (5): 811–822. doi:10.1007/s40799-021-00506-9.
   Web of Science ®Google Scholar
• Silva, D., J. Pamies Teixeira, and C. M. Machado. 2014. “Methodology Analysis for Evaluation of Drilling-Induced Damage in Composites.” The International Journal, Advanced Manufacturing Technology 71 (9–12): 1919–1928. doi:10.1007/s00170-014-5616-y.
   Web of Science ®Google Scholar
• Tolouei-Rad, M., and M. Aamir. 2021. ”Analysis of the Performance of Drilling Operations for Improving Productivity.” In Drilling Technology, edited by M. Tolouei-Rad, 5–20. Rijeka: IntechOpen.
   Google Scholar
• Tolouei-Rad, M., and M. Aamir. 2021. ”Introductory Chapter: Drilling Technology.” In Drilling Technology, edited by M. Tolouei-Rad, 1–4. Rijeka: IntechOpen.
   Google Scholar
• Tsao, C. C., and H. Hocheng. 2005. “Computerized Tomography and C-Scan for Measuring Delamination in the Drilling of Composite Materials Using Various Drills.” International Journal of Machine Tools & Manufacture 45 (11): 1282–1287. doi:10.1016/j.ijmachtools.2005.01.009.
   Web of Science ®Google Scholar
• Wróbel, G., S. Pawlak, and G. Muzia. 2011. “Thermal Diffusivity Measurements of Selected Fiber Reinforced Polymer Composites Using Heat Pulse Method.” Archives of Materials Science and Engineering 48 (1): 25–32.
   Google Scholar
• Xie, H., H. Fang, X. Li, L. Wan, P. Wu, and Y. Yu. 2021. “Low-Velocity Impact Damage Detection and Characterization in Composite Sandwich Panels Using Infrared Thermography.” Composite structures 269 (December 2020): 114008. doi:10.1016/j.compstruct.2021.114008.
   Google Scholar