References
- AASHTO TP 79-13. 2013. Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT). Washington, DC: American Association of State Highway and Transportation Officials.
- Al-Qadi, I. L., H. Gouru, and R. E. Weyers. 1994. “Asphalt Portland Cement Concrete Composite: Laboratory Evaluation.” Journal of Transportation Engineering 120: 94–108. doi:https://doi.org/10.1061/(ASCE)0733-947X(1994)120:1(94).
- Anderton, G. L. 2000. “Engineering Properties of Resin Modified Pavement (RMP) for Mechanistic Design.”s Final Report ERDC/GLTR-00-2. Vicksburg, MS: U.S. Army Engineer Research and Development Center.
- ASTM D1559-89. (Withdrawn 1998). 2012. Test Method for Resistance of Plastic Flow of Bituminous Mixtures Using Marshall Apparatus. USA: ASTM International.
- ASTM D6931-12. 2012. Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures. USA: ASTM International.
- ASTMC39/C39M-15. 2015. Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens. USA: ASTM International.
- Awoyera, P. O., A. Adesina, and R. Gobinath. 2019. “Role of Recycling Fine Materials as Filler for Improving Performance of Concrete-a Review.” Australian Journal of Civil Engineering 17 (2): 85–95. doi:https://doi.org/10.1080/14488353.2019.1626692.
- Bharath, G., Manoj Shukla, M. N. Nagabushana, Satish Chandra, and Amit Shaw. „Laboratory and field evaluation of cement grouted bituminous mixes.„ Road Materials and Pavement Design 21, no. 6 (2019): 1694–1712. doi:https://doi.org/10.1080/14680629.2019.1567375
- Bocci, E., A. Graziani, and F. Canestrari. 2015. “Mechanical 3D Characterization of Epoxy Asphalt Concrete for Pavement Layers of Orthotropic Steel Decks.” Construction and Building Materials 79: 145–152. doi:https://doi.org/10.1016/j.conbuildmat.2014.12.120.
- Chen, L., Z. Qian, and H. Hu. 2013. “Epoxy Asphalt Concrete Protective Course Used on Steel Railway Bridge.” Construction and Building Materials 41: 125–130. doi:https://doi.org/10.1016/j.conbuildmat.2012.12.002.
- Cihackova, P., P. Hyzl, D. Stehlik, O. Dasek, O. Šernas, and A. Vaitkus. 2015. “Performance Characteristics of the Open-graded Asphalt Concrete Filled with a Special Cement Grout.” The Baltic Journal of Road and Bridge Engineering 10 (4): 316–324. doi:https://doi.org/10.3846/bjrbe.2015.40.
- Ding, Q., Z. Sun, F. Shen, and S. Huang. 2010. “The Performance Analysis of Semi-flexible Pavement by the Volume Parameter of Matrix Asphalt Mixture.” Advanced Materials Research 168-170: 351–356. doi:https://doi.org/10.4028/www.scientific.net/AMR.168-170.351.
- Gawedzinski, M. J. (2008). Evaluation of semi-flexible (Resin modified) pavement (report no I2008-1). USA: Illinois Department of Transportation, Bureau of materials and physical Research, Springfield.
- Gupta, L., and G. Suresh. July 2017. “Determination of Indirect Tensile Strength of Bituminous Concrete Mix Prepared Using Stone Dust and Cement as Filler Materials. In International Congress and Exhibition.” In Sustainable Civil Infrastructures: Innovative Infrastructure Geotechnology, 249–261. Cham: Springer. doi:https://doi.org/10.1007/978-3-319-61633-9_16.
- Gupta L., Suresh G. (2018) Determination of Indirect Tensile Strength of Bituminous Concrete Mix Prepared Using Stone Dust and Cement as Filler Materials. In: Struble L., Tebaldi G. (eds) Materials for Sustainable Infrastructure. GeoMEast 2017. Sustainable Civil Infrastructures. Springer, Cham. https://doi.org/https://doi.org/10.1007/978-3-319-61633-9_16.
- Hassan, K. E., A. Setyawan, and S. E. Zoorob 2002. “Effect of Cementitious Grouts on the Properties of Semi-flexible Bituminous Pavements, Performance of Bituminous and Hydraulic Materials in Pavements.” Proceedings of the Fourth European Symposium on performance of bituminous and Hydraulic materials in pavements. Nottingham, UK: Bitmat 4.
- Hosking, J. R. 1992. “Road Aggregates and Skidding.” TRRL State-of-the-Art Review 4. HMSO.
- Hou, S., T. Xu, and K. Huang. 2015. “Investigation into Engineering Properties and Strength Mechanism of Grouted Macadam Composite Materials.” International Journal of Pavement Engineering. Advance online publication. doi:https://doi.org/10.1080/10298436.2015.1024467.
- Husain, N. M., M. R. Karim, H. B. Mahmud, and S. Koting. 2014. “Effects of Aggregate Gradation on the Physical Properties of Semi Flexible Pavement.” Advances in Materials Science and Engineering 2014: 1–8. doi:https://doi.org/10.1155/2014/529305.
- Indukuri, C. S. R., R. Nerella, and S. R. C. Madduru. 2020. “Workability, Microstructure, Strength Properties and Durability Properties of Graphene Oxide Reinforced Cement Paste.” Australian Journal of Civil Engineering 18 (1): 73–81. doi:https://doi.org/10.1080/14488353.2020.1721952.
- IRC:115. Structural Evaluation and Strengthening of Flexible Pavements by Falling Weight Deflectometer Technique. New Delhi: Indian Roads Congress.
- IRC:37. 2018. Tentative Guidelines for the Design of Flexible Pavements. New Delhi: Indian Roads Congress.
- Khan, I. 2010. “Mix Design for Cement Grouted Bituminous Macadam.” Unpublished M. Tech thesis, Kanpur, India: IIT Kanpur.
- Kim, M., P. Phaltane, L. Mohammad, and M. Elseifi. 2018. “Temperature Segregation and Its Impact on the Quality and Performance of Asphalt Pavements.” Frontiers of Structural and Civil Engineering 12 (4): 536–547. doi:https://doi.org/10.1007/s11709-017-0451-5.
- Ling, T., Z. Zhao, C. Xiong, Y. Dong, Y. Liu, and Q. Dong. 2009. “The Application of Semi-flexible Pavement on Heavy Traffic Roads.” International Journal of Pavement Research and Technology 2 (5): 211–217.
- Mallikarjuna Rao, G., and T. D. Gunneswara Rao. 2018. “A Quantitative Method of Approach in Designing the Mix Proportions of Fly Ash and GGBS-based Geopolymer Concrete.” Australian Journal of Civil Engineering 16 (1): 53–63. doi:https://doi.org/10.1080/14488353.2018.1450716.
- Ministry of Road Transport & Highways (MoRTH). 2013. Specifications for Road and Bridge Works. Fifth Revision ed.
- Mohammed, A., N. T. K. Al-Saadi, and J. Sanjayan. 2018. “Inclusion of Graphene Oxide in Cementitious Composites: State-of-the-art Review.” Australian Journal of Civil Engineering 16 (2): 81–95. doi:https://doi.org/10.1080/14488353.2018.1450699.
- MORTH (2013) “Specifications for Road and Bridges Works”, 5th revision. Ministry of Road Transport and Highways MORTH, Indian Roads Congress, New Delhi, India
- MS-2. 2015. Asphalt Institute, Mix Design Manual Series No. 2 (MS-2). 7th ed. Lexington, Kentucky: Asphalt Institute.
- Mukherjee, D., and U. C. Sahoo. 2019. “Laboratory Characterization of a Cement Grouted Bituminous Macadam Made with Portland Slag Cement.” International Journal of Pavement Research and Technology 12 (6): 574–580. doi:https://doi.org/10.1007/s42947-019-0068-2.
- Murthi, P., P. Awoyera, P. Selvaraj, D. Dharsana, and R. Gobinath. 2018. “Using Silica Mineral Waste as Aggregate in a Green High Strength Concrete: Workability, Strength, Failure Mode, and Morphology Assessment.” Australian Journal of Civil Engineering 16 (2): 122–128. doi:https://doi.org/10.1080/14488353.2018.1472539.
- Nayaka, R. R., U. J. Alengaram, M. Z. Jumaat, S. B. Yusoff, and R. Ganasan. 2019. “Performance Evaluation of Masonry Grout Containing High Volume of Palm Oil Industry By-products.” Journal of Cleaner Production 220: 1202–1214. doi:https://doi.org/10.1016/j.jclepro.2019.02.134.
- Nejad, F. M., E. Aflaki, and M. Mohammadi. 2010. “Fatigue Behavior of SMA and HMA Mixtures.” Construction and Building Materials 24 (7): 1158–1165. doi:https://doi.org/10.1016/j.conbuildmat.2009.12.025.
- Oliveira, J., N. H. Thom, and S. Zoorob, 2006. “Fracture and Fatigue Strength of Grouted Macadams.” Paper presented at the Proceedings of the 10th International Conference on Asphalt Pavements. Quebec.
- Pei, J., J. Cai, D. Zou, J. Zhang, R. Li, X. Chen, and L. Jin. 2016. “Design and Performance Validation of High-performance Cement Paste as a Grouting Material for Semi-flexible Pavement.” Construction and Building Materials 126: 206–217. doi:https://doi.org/10.1016/j.conbuildmat.2016.09.036.
- Qiu, Y., and K. Lum. 2006. “Design and Performance of Stone Mastic Asphalt.” Journal of Transportation Engineering 132 (12): 956–963. doi:https://doi.org/10.1061/(ASCE)0733-947X(2006)132:12(956).
- Raju, G. M., D. S. R. Reddy, and K. S. Reddy, 2014. “Performance Evaluation of Cement Grouted Bituminous Mixes.” Paper presented at the 12th ISAP Conference on Asphalt pavements. Raleigh, NC.
- Setyawan, A. 2005. “Design and Properties of Hot Mixture Porous Asphalt for Semi-flexible Pavement Applications.” Journal of Media. Teknik. Sipil 5 (2): 41–45.
- Setyawan, A. 2013. “Assessing the Compressive Strength Properties of Semi-flexible Pavements.” Procedia Engineering 54: 863–874. doi:https://doi.org/10.1016/j.proeng.2013.03.079.
- Shaoke, A., C. Ai, D. Ren, A. Rahman, and Y. Qiu. 2018. “Laboratory and Field Evaluation of a Novel Cement Grout Asphalt Composite.” Journal of Materials in Civil Engineering 30 (8): 04018179. doi:https://doi.org/10.1061/(ASCE)MT.1943-5533.0002376.
- Sidiq, A., S. Setunge, R. J. Gravina, and F. Giustozzi. 2020. “Self-repairing Cement Mortars with Microcapsules: A Microstructural Evaluation Approach.” Construction and Building Materials 232: 117239. doi:https://doi.org/10.1016/j.conbuildmat.2019.117239.
- Solanki, P., and M. Zaman. 2017. “Design of Semi-rigid Type of Flexible Pavements.” International Journal of Pavement Research and Technology 10 (2): 99–111. doi:https://doi.org/10.1016/j.ijprt.2016.10.004.
- Vavrik, W. R., W. J. Pine, G. A. Huber, S. H. Carpenter, and R. Bailey. 2001. “The Bailey Method of Gradation Evaluation: The Influence of Aggregate Gradation and Packing Characteristics on Voids in the Mineral Aggregate.” Journal of Association. Asphalt Pavement Technology 70: 132–175.
- Xie, T., P. Visintin, X. Zhao, and R. Gravina. 2020. “Mix Design and Mechanical Properties of Geopolymer and Alkali Activated Concrete: Review of the State-of-the-art and the Development of a New Unified Approach.” Construction and Building Materials 256: 119380. doi:https://doi.org/10.1016/j.conbuildmat.2020.119380.
- Yang, B., and X. Weng. 2015. “The Influence on the Durability of Semiflexible Airport Pavement Materials to Cyclic Wheel Load Test.” Construction and Building Materials 98: 171–175. doi:https://doi.org/10.1016/j.conbuildmat.2015.08.092.
- Yin, H., Y. Zhang, Y. Sun, W. Xu, D. Yu, H. Xie, and R. Cheng. 2015. “Performance of Hot Mix Epoxy Asphalt Binder and Its Concrete.” Materials and Structures 48 (11): 3825–3835. doi:https://doi.org/10.1617/s11527-014-0442-0.
- Zhang, H., L. Meng, and G. Zhang. 2017. “Comparative Study on Mechanical Performance of Asphalt–cement Mortar and Emulsified Asphalt–cement Mortar.” Road Materials and Pavement Design 18 (5): 1239–1250. doi:https://doi.org/10.1080/14680629.2016.1202857.
- Zhang, H., S. Liang, Y. Ma, and X. Fu. 2016a. “Study on the Mechanical Performance and Application of the Composite Cement–asphalt Mixture.” International Journal of Pavement Engineering 1–9. doi:https://doi.org/10.1080/10298436.2016.1255530.
- Zhang, J., J. Cai, J. Pei, R. Li, and X. Chen. 2016b. “Formulation and Performance Comparison of Grouting Materials for Semi-flexible Pavement.” Construction and Building Materials 115: 582–592. doi:https://doi.org/10.1016/j.conbuildmat.2016.04.062.