Advanced search
Publication Cover
Australian Journal of Electrical and Electronics Engineering Volume 16, 2019 - Issue 1
Submit an article Journal homepage
178
Views
0
CrossRef citations to date
0
Altmetric
Articles

Improved quadratic boost converter using switching coupled-inductor and voltage-doubler

Yiyang LiSchool of Electrical and Information Engineering, University of Sydney, Sydney, AustraliaCorrespondence[email protected]
View further author information
,
Swamidoss SathiakumarSchool of Electrical and Information Engineering, University of Sydney, Sydney, AustraliaView further author information
&
John Long SoonSchool of Electrical and Information Engineering, University of Sydney, Sydney, AustraliaView further author information
Pages 33-45 | Received 15 Nov 2018, Accepted 27 Feb 2019, Published online: 24 Mar 2019

References

  • Axelrod, B., Y. Berkovich, S. Tapuchi, and A. Ioinovici. 2008. “Steep Conversion Ration Cuk, Zeta, and Sepic Converters Based on a Switched Coupled-Inductor Cell.” Paper presented at Proc. IEEE PESC 2008, 3009–3014, Rhodes, Greece, June 15-19.
  • Changchien, S.-K., T.-J. Liang, J.-F. Chen, and L.-S. Yang. 2010. “Novel High Step-Up DC-DC Converter for Fuel Cell Energy Conversion System.” IEEE Transactions on Industrial Electronics 57 (6): 2007–2017. doi: 10.1109/TIE.2009.2026364.
  • Chen, S. M., M. L. Lao, Y. H. Hsieh, T. J. Liang, and K. H. Chen. 2015. “A Novel Switched-Coupled-Inductor DC-DC Step-Up Converter and Its Derivatives.” IEEE Transactions on Industry Applications 51 (1): 309–314. doi: 10.1109/TIA.2014.2332642.
  • Choi, J., J.-S. Kim, G. Lee, K.-D. Kim, and F.-S. Kang. 2015. “Cacaded Dc-To-Dc Converter Employing a Tapped-Inductor for High Voltage Boosting Ratio.” Paper presented at 2015 41st IECON, Yokohama, Japan, November 9–12.
  • Das, V., D. Maiti, N. Mondal, and S. K. Biswas. 2014. “Studies on Boost Topologies for High Boost Ratio.” Paper presented at 2014 International Conference on Control, Instrumentation, Energy and Communication, Calcutta, India, 31 January–2 February.
  • Gaubert, J.-P., and G. Chanedeau. 2009. “Evaluation of DC-DC Converters Topologies with Quadratic Conversion Ratios for Photovoltaic Power Systems.” Paper presented at 13th European Conference on Power Electronics and Applications, Barcelona, Spain, September 8–10.
  • Hariharan, S., and V. Naveen Kumar. 2010. “Design of a DC-DC Converter for a PV Array.” Paper presented at International Conference on Industrial Electronics, Control and Robotics, Orissa, India, December 27–29.
  • Leyva-Ramos, J., M. G. Ortiz-Lopez, L. H. Diaz-Saldierna, and J. A. Morales-Saldana. 2009. “Switching Regulator Using a Quadratic Boost Converter for Wide DC Conversion Ratios.” IET Power Electronics 2 (5): 605–613. doi: 10.1049/iet-pel.2008.0169.
  • Li, Y., and S. Sathiakumar. 2017a. “Improved Quadratic Boost Converter Based on the Voltage Lift Technique.” Paper presented at 2017 Asia Modelling Symposium, Kota Kinabalu, Malaysia, December 4–6.
  • Li, Y., and S. Sathiakumar. 2017b. “Quadratic DC-DC Boost Converter Using Coupled Inductors for High Step-Up Ratio.” Paper presented at 2017 Asia Modelling Symposium, Kota Kinabalu, Malaysia, December 4–6.
  • Minghui, Z., K. Xiaobo, S. Li, and W. Yahui. 2016. “Forecasting and Simulation Method Research for Solar Energy Resource.” Paper presented at 2016 IEEE PES Asia-Pacific Power and Energy Engineering Conference, Xi’an, China, October 25–28.
  • Sahoo, M., and K. Siva Kumar. 2014. “High Gain Step up DC-DC Converter for DC Micro-Grid Application.” Paper presented at 7th International Conference on Information and Automation for Sustainability, Colombo, Sri Lanka, December 22–24.
  • Wai, R. J., and R. Y. Duan. 2005. “High Step-Up Converter with Coupled-Inductor.” IEEE Transactions on Power Electronics 20 (5): 1025–1035. doi: 10.1109/TPEL.2005.854023.
  • Wu, T. S., Y. S. Lai, J. C. Hung, and Y. M. Chen. 2008. “Boost Converter with Coupled Inductors and Buck-Boost Type of Active Clamp.” IEEE Transactions on Industrial Electronics 55 (1): 154–162. doi: 10.1109/TIE.2007.903925.
  • Wu, T. S., and T. H. Yu. 1998. “Unified Approach to Developing Single-Stage Power Converters.” IEEE Transactions on Aerospace and Electronic Systems 34 (1):211–223. doi: 10.1109/7.640279

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.