References
- Hajibeygi M, Shabanian M. The effect of organo-modified silicate nanolayers on the oxygen and water vapor barrier properties of poly(lactic acid). J Chin Chem Soc. 2018;65:1340–1346. doi:10.1002/jccs.201800058.
- Koumoulos EP, Valentin M, Dragatogiannis DA, et al. Nanomechanical properties of plasma treated polylactic acid. Plast Rubber Compos. 2015;44:322–329. doi:10.1179/1743289815Y.0000000023.
- Triwulandari E, Ghozali M, Sondari D, et al. Effect of lignin on mechanical, biodegradability, morphology, and thermal properties of polypropylene/polylactic acid/lignin biocomposite. Plast Rubber Compos. 2019;48:82–92. doi:10.1080/14658011.2018.1562746.
- Li H, Cao Z, Wu D, et al. Crystallisation, mechanical properties and rheological behaviour of PLA composites reinforced by surface modified microcrystalline cellulose. Plast Rubber Compos. 2016;45:181–187. doi:10.1179/1743289815Y.0000000040.
- Ketabchi MR, Khalid M, Ratnam CT, et al. Investigating the effects of processing parameters on poly(lactic acid) properties – a central composite design approach. Plast Rubber Compos. 2019;48:95–102. doi:10.1080/14658011.2019.1570444.
- Peng Q, Cheng J, Lu S, et al. Electrospun hyperbranched polylactic acid-modified cellulose nanocrystals/polylactic acid for shape memory membranes with high mechanical properties. Polym Adv Technol. 2020;31:15–24. doi:10.1002/pat.4743.
- Nouri-Ahangarani F, Nekoomanesh M, Mirmohammadi SA, et al. Effects of FeCl3 doping on the performance of MgCl2/TiCl4/DNPB catalyst in 1-hexene polymerization. Polyolefins J. 2017;4:253–262. doi:10.22063/poj.2017.1467.
- Hanifpour A, Bahri-Laleh N, Nekoomanesh-Haghighi M, et al. Poly1-hexene: new impact modifier in HIPS technology. J Appl Polym Sci. 2016;133:8508. doi:10.1002/app.43882.
- Shirbakht S, Mirmohammadi SA, Didehban K, et al. Effects of monomer length on α-olefins polymerization using a conventional Ziegler–Natta catalyst. Adv Polym Tech. 2018;37:2588–2596. doi:10.1002/adv.21934.
- Nazari D, Bahri-Laleh N, Nekoomanesh-Haghighi M, et al. New high impact polystyrene: use of poly(1-hexene) and poly(1-hexene-co-hexadiene) as impact modifiers. Polym Adv Technol. 2018;29:1603–1612. doi:10.1002/pat.4265.
- Shirbakht S, Bahri-Laleh N, Mirmohammadi SA, et al. Evaluation of GS-loaded poly1-hexene as a new elastomeric drug release system. Int J Polym Anal Char. 2019:1–12. doi:10.1080/1023666X.2019.1663599.
- Kumar R. Blends of polylactic acid and arylated soy protein isolate with triacetine as plasticiser. Plast Rubber Compos. 2013;42:308–314. doi:10.1179/1743289813Y.0000000052.
- Lee JB, Lee YK, Choi GD, et al. Compatibilizing effects for improving mechanical properties of biodegradable poly (lactic acid) and polycarbonate blends. Polym Degrad Stabil. 2011;96:553–560. doi:10.1016/j.polymdegradstab.2010.12.019.
- Sadjadi S, Bahri-Laleh N, Nekoomanesh-Haghighi M, et al. Rationalizing chain microstructure in the polyα-olefins synthesized by cationic AlCl3/H2O catalytic system. Int J Polym Anal Char. 2019;24:556–570. doi:10.1080/1023666X.2019.1627027.
- Hanifpour A, Bahri-Laleh N, Mirmohammadi SA. Silica-grafted poly1-hexene: a new approach to prepare polyethylene/silica nanocomposites. Polym Composite. 2019;40:1053–1060. doi:10.1002/pc.24795.
- Bahri-Laleh N, Didehban K, Yarahmadi E, et al. Microwave absorption properties of polyaniline/carbonyl iron composites. Silicon. 2018;10:1337–1343. doi:10.1007/s12633-017-9609-y.
- Mirmohammadi SA, Nekoomanesh-Haghighi M, Mohammadian Gezaz S, et al. In-situ photocrosslinkable nanohybrid elastomer based on polybutadiene/polyhedral oligomeric silsesquioxane. Mater Sci Eng C. 2016;68:530–539. doi:10.1016/j.msec.2016.06.027.
- Mirmohammadi SA, Nekoomanesh-Haghighi M, Mohammadian Gezaz S, et al. Polybutadiene/polyhedral oligomeric silsesquioxane nanohybrid: investigation of various reactants in polyesterification reaction. Polym Int. 2016;65:516–525. doi:10.1002/pi.5085.
- Didehban K, Yarahmadi E, Nouri-Ahangarani F, et al. Radar absorption properties of Ni0.5Zn0.5Fe2O4/PANI/epoxy nanocomposites. J Chin Chem Soc. 2015;62:826–831. doi:10.1002/jccs.201500136.
- Mirmohammadi SA, Imani M, Uyama H, et al. The effects of solvent and initiator on anionic ring opening polymerization of ϵ-caprolactone: synthesis and characterization. Polym Int. 2014;63:479–485. doi:10.1002/pi.4531.
- Liu S, Li Y, Sun H, et al. Preparation and characterisation of a lamellar hydroxyapatite/polylactic acid composite. Plast Rubber Compos. 2019;48:66–73. doi:10.1080/14658011.2018.1548191.
- Mirmohammadi SA, Imani M, Uyama H, et al. Hybrid organic-inorganic nanocomposites based on poly(E-caprolactone)/polyhedral oligomeric silsesquioxane: synthesis and in vitro evaluations. Int J Polym Mater Polym Biomater. 2014;63:624–631. doi:10.1080/00914037.2013.854236.
- Mirmohammadi S, Imani M, Uyama H, et al. In situ photocrosslinkable nanohybrids based on poly(E-caprolactone fumarate)/polyhedral oligomeric silsesquioxane: synthesis and characterization. J Polym Res. 2013;20:1–13. doi:10.1007/s10965-013-0297-z.
- Hanifpour A, Bahri-Laleh N, Nekoomanesh-Haghighi M, et al. Synthesis and characterization of poly1-hexene/silica nanocomposites. Polym Test. 2017;61:27–34. doi:10.1016/j.polymertesting.2017.05.002.
- Li X, Ai X, Pan H, et al. The morphological, mechanical, rheological, and thermal properties of PLA/PBAT blown films with chain extender. Polym Adv Technol. 2018;29:1706–1717. doi:10.1002/pat.4274.
- Hedayati F, Moshiri-Gomchi N, Assaran-Ghomi M, et al. Preparation and properties of enhanced nanocomposites based on PLA/PC blends reinforced with silica nanoparticles. Polym Adv Technol. 2020;31:566–573. doi:10.1002/pat.4797.
- Phuong VT, Coltelli M-B, Cinelli P, et al. Compatibilization and property enhancement of poly(lactic acid)/polycarbonate blends through triacetin-mediated interchange reactions in the melt. Polymer. 2014;55:4498–4513. doi:10.1016/j.polymer.2014.06.070.
- Lin L, Deng C, Wang Y-z. Improving the impact property and heat-resistance of PLA/PC blends through coupling molecular chains at the interface. Polym Adv Technol. 2015;26:1247–1258. doi:10.1002/pat.3560.
- Jiang Y, Loos K. Enzymatic synthesis of biobased polyesters and polyamides. Polymers. 2016;8:243. doi: 10.3390/polym8070243
- Cole H, Brock GE. Self-adjustment of internal radiation field to compensate for linearly varying spacing in X-ray diffraction. Phys Rev. 1959;116:868–873. doi:10.1103/PhysRev.116.868.
- Shuhua W, Qiaoli X, Fen L, et al. Preparation and properties of cellulose-based carbon microsphere/poly(lactic acid) composites. J Compos Mater. 2014;48:1297–1302. doi:10.1177/0021998313485263.
- Song J, Zhang H. Influence of pearlescent pigments on mechanical properties and crystallization behavior of polylactic acid. Iran Polym J. 2018;27:105–114. doi:10.1007/s13726-017-0591-4.
- Topkanlo HA, Ahmadi Z, Taromi FA. An in-depth study on crystallization kinetics of PET/PLA blends. Iran Polym J. 2018;27:13–22. doi:10.1007/s13726-017-0582-5.
- Khajehpour-Tadavani S, Nejabat G-R and Mortazavi M-M. Crystallinity changes of HDPE films containing different amounts of an oxo-biodegradable additive due to UVC exposure. Polyolefins J. 2019. doi:10.22063/poj.2019.2468.1135.
- Zhang MC, Guo B-H, Xu J. A review on polymer crystallization theories. Crystals. 2017;7:1–37.
- Weeks JJ. Melting temperature and change of Lamellar thickness with time for bulk polyethylene. J Res Natl Bur Stand A Phys Chem. 1963;67A:441–451. doi:10.6028/jres.067A.046.
- Bahramzadeh A, Try AC. Molecular modification of slightly cross-linked HDPE: comparison of electron beam irradiation and peroxide treatments. Polym Adv Technol. 2016;27:1422–1429. doi:10.1002/pat.3810.
- Hassan F, Entezam M. Electron beam irradiation method to change polypropylene application: rheology and thermomechanical properties. Polyolefins J. 2019;6:53–61. doi:10.22063/poj.2018.2257.1118.