Effect of fibre arrangements on tensile properties of 3D printed continuous fibre-reinforced thermoplastic composites

References

• Kabir SMF, Mathur K, Seyam AFM. A critical review on 3D printed continuous fiber-reinforced composites: history, mechanism, materials and properties. Compos Struct. 2019;232:111476.
   Web of Science ®Google Scholar
• Tuo X, Yu Y, Zhao Y, et al. Validation study on the theory of composites by using three-dimensional printing technology. J Reinf Plast Compos. 2018;37(15):1004–1010.
   Web of Science ®Google Scholar
• Parandoush P, Lin D. A review on additive manufacturing of polymer-fiber composites. Compos Struct. 2017;182(12):36–53.
   Google Scholar
• Yu TM, Gao HB, Wang BM, et al. Research progress of molding process of carbon fiber reinforced thermoplastic composites. Eng Plast Appl. 2018;46(4):139–144.
   Google Scholar
• Ngo T, Kashani A, Imbalzano G, et al. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Compos B Eng. 2018;143:172–196.
   Web of Science ®Google Scholar
• Daminabo SC, Goel S, Grammatikos SA, et al. FDM-based Additive manufacturing (3D printing): techniques for polymer material systems. Mater Today. 2020;16:100248.
   Web of Science ®Google Scholar
• Tekinalp HL, Kunc V, Velez-Garcia GM, et al. Highly oriented carbon fiber–polymer composites via additive manufacturing. Compos Sci Technol. 2014;105(12):144–150.
   Google Scholar
• Yang C, Tian X, Liu T, et al. 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance. Rapid Prototyp J. 2017;23(1):209–215.
   Web of Science ®Google Scholar
• Omer R, Mali HS, Singh SK. Tensile performance of additively manufactured short carbon fibre-PLA composites: neural networking and GA for prediction and optimisation. Plast, Rubber Compos. 2020;49(6):271–280.
   Web of Science ®Google Scholar
• Parmiggiani A, Prato M, Pizzorni M. Effect of the fiber orientation on the tensile and flexural behavior of continuous carbon fiber composites made via fused filament fabrication. Int J Adv Manuf Technol. 2021;114(7-8):2085–2101.
   Web of Science ®Google Scholar
• Klift F, Koga Y, Todoroki A, et al. 3D printing of continuous carbon fibre reinforced thermo-plastic (CFRTP) tensile test specimens. Open J Compos Mater. 2016;6(1):18–27.
   Google Scholar
• Dickson AN, Barry JN, Mcdonnell KA, et al. Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing. Addit Manuf. 2017;16:146–152.
   Web of Science ®Google Scholar
• Justo J, Tavara L, Garcia-Guzman L, et al. Characterization of 3D printed long fibre reinforced composites. Compos Struct. 2018;185(FEB.):537–548.
   Google Scholar
• Iragi M, Pascual-González C, Esnaola A, et al. Ply and interlaminar behaviours of 3D printed continuous carbon fibre-reinforced thermoplastic laminates; effects of processing conditions and microstructure. Addit Manuf. 2019;30(C):100884–100884.
   Google Scholar
• Pascual-González C, Iragi M, Fernández A, et al. An approach to analyse the factors behind the micromechanical response of 3D-printed composites. Compos B Eng. 2020;186:107820.
   Web of Science ®Google Scholar
• Pascual-González C, San Martín P, Lizarralde I, et al. Post-processing effects on microstructure, interlaminar and thermal properties of 3D printed continuous carbon fibre composites. Compos B Eng. 2021;210(3):108652.
   Google Scholar
• Azarov AV, Antonov FK, Golubev MV, et al. Composite 3D printing for the small size unmanned aerial vehicle structure. Compos B Eng. 2019;169(JUL.15):157–163.
   Google Scholar
• Markforged INC. Methods for fiber reinforced addictive manufacturing: US, WO2014197732A2. 2014-12-11.
   Google Scholar
• Newcomb BA. Processing, structure, and properties of carbon fibers. Compos Part A Appl Sci Manuf. 2016;91(91):262–282.
   Google Scholar
• Kabir SMF, Mathur K, Seyam A-FM. The road to improved fiber-reinforced 3D printing technology. Technologies. 2020;8(4):51.
   Web of Science ®Google Scholar
• Chacón JM, Caminero MA, García-Plaza E, et al. Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optimal selection. Mater Des. 2017;124:143–157.
   Web of Science ®Google Scholar
• Kotlinski J. Mechanical properties of commercial rapid prototyping materials. Rapid Prototyp J. 2014;20(6):499–510.
   Web of Science ®Google Scholar
• Lanzotti A, Grasso M, Staiano G, et al. The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3D printer. Rapid Prototyp J. 2015;21:604–617.
   Web of Science ®Google Scholar
• Uvarov NF. Estimation of composites conductivity using a general mixing rule. Solid State Ion. 2000;136(1-2):1267–1272.
   Google Scholar
• Rozanov KN, Koledintseva MY, Drewniak JL, et al. A mixing rule for predicting frequency dependence of material parameters in magnetic composites. J Magn Magn Mater. 2012;324(6):1063–1066.
   Web of Science ®Google Scholar
• MarkForged. Mechanical properties. Available from: https://markforged.com/materials/data-sheet/.
   Google Scholar
• Peng Y, Wu Y, Wang K, et al. Synergistic reinforcement of polyamide-based composites by combination of short and continuous carbon fibers via fused filament fabrication. Compos Struct. 2019;207:232–239.
   Web of Science ®Google Scholar
• Soete J, Badoux B, Swolfs Y, et al. Defect detection in 3D printed carbon fibre composites using X-ray Computed tomography. 9th Conference on Industrial Computed Tomography (ICT); 2019; Padova, Italy. p. 1–8.
   Google Scholar
• Parandoush P, Tucker L, Zhou C, et al. Laser assisted additive manufacturing of continuous fiber reinforced thermoplastic composites. Mater Des. 2017;131:186–195.
   Web of Science ®Google Scholar