Cure kinetics of a composite friction material with phenolic resin/rubber compounds as organic binder

References

• Gerlici J, Lack T. Rail vehicles brake components test bench utilisation. Appl Mech Mater. 2013;486:379–386. doi:10.4028/www.scientific.net/AMM.486.379.
   Google Scholar
• Smales H. Friction materials—black art or science? Proc Inst Mech Eng Part J Automob Eng. 1995;209(3):151–157. doi:10.1243/PIME_PROC_1995_209_200_02.
   Web of Science ®Google Scholar
• Bijwe J. Composites as friction materials: recent developments in non-asbestos fiber reinforced friction materials? A review. Polym Compos. 1997;18(3):378–396. doi:10.1002/pc.10289.
   Web of Science ®Google Scholar
• Wasilewski P. Full-scale dynamometer test of composite railway brake shoes – study on the effect of the reinforcing fibre type. Acta Mech Autom. 2018;12(3):204–208.
   Web of Science ®Google Scholar
• Nawangsari P, Jamasri J; Rochardjo HSB. Effect of phenolic resin on density, porosity, hardness, thermal stability, and friction Performance as a binder in non-asbestos organic brake pad. IOP Conf Ser Mater Sci Eng. 2019;547:012012. doi:10.1088/1757-899X/547/1/012012.
   Google Scholar
• Yang H, Luo R, Han S, et al. Effect of the ratio of graphite/pitch coke on the mechanical and tribological properties of copper–carbon composites. Wear. 2010;268(11–12):1337–1341. doi:10.1016/j.wear.2010.02.007.
   Web of Science ®Google Scholar
• Saffar A, Shojaei A. Effect of rubber component on the performance of brake friction materials. Wear. 2012 (274-275): 286–297. doi:10.1016/j.wear.2011.09.012.
   Web of Science ®Google Scholar
• Cardona F, Kin-Tak AL, Fedrigo J. Novel phenolic resins with improved mechanical and toughness properties. J Appl Polym Sci. 2012;123(4):2131–2139. doi:10.1002/app.34719.
   Web of Science ®Google Scholar
• Takeichi T, Kawauchi T, Agag T. High performance polybenzoxazines as a novel type of phenolic resin. Polym J 2008;40(12):1121–1131. doi:10.1295/polymj.PJ2008072.
   Web of Science ®Google Scholar
• Cox R. Chapter 9 Phenolic resins. In: Engineered tribological composites. Book News Inc. Portland: SAE; 2012. p. 183–199.
   Google Scholar
• Arrillaga A, Zaldua AM, Atxurra RM, et al. Techniques used for determining cure kinetics of rubber compounds. Eur Polym J. 2007;43(11):4783–4799. doi:10.1016/j.eurpolymj.2007.08.024.
   Web of Science ®Google Scholar
• Liu Y, Liu S-W, Li Z-Q, et al. Curing kinetics of allyl phenolic resin. Dongbei Daxue Xuebao J Northeast.Univ. 2012;33:551–554.
   Google Scholar
• Sun J, Zhu XF, Wang XB, et al. Curing kinetics of phenol formaldehyde resin modified with sodium silicate. Appl Mech Mater. 2012;184–185:1471–1479. https://doi.org/10.4028/www.scientific.net/AMM.184-185.1471.
   Google Scholar
• Curing kinetics of phenol-formaldehyde resins. Thermal Analysis Application No. UC 193. Application published in METTLER TOLEDO Thermal alnalysis UserCom 19.
   Google Scholar
• Bijwe J, Nidhi, Majumdar N, Satapathy BK. Influence of modified phenolic resins on the fade and recovery behavior of friction materials. Wear. 2005;259(7–12):1068–1078. doi:10.1016/j.wear.2005.01.011.
   Google Scholar
• Nidhi, Bijwe J, Mazumdar N. Influence of amount and modification of resin on fade and recovery behavior of non-asbestos organic (NAO) friction materials. Tribol Lett. 2006;23(3):215–222. doi:10.1007/s11249-006-9055-2.
   Web of Science ®Google Scholar
• Cox R. Chapter 3 Sliding wear. In: Engineered tribological composites. Book News Inc. Portland: SAE; 2012. p. 33–59.
   Google Scholar
• Weintraub MH, Bernard JP. Chemical and functional responses to brake lining cure variations. SAE Trans. 1968;77:1466–1473.
   Google Scholar
• Budiono HS, Surojo E, Muhayat N, et al. Effect of post curing method on flexural strength of composite friction brake. MATEC Web Conf. 2018;159:02008. doi:10.1051/matecconf/201815902008.
   Google Scholar
• Chen ZN, Ding QJ, Zhao CS. Studies on cure kinetics of epoxy friction material for ultrasonic motor. J Nanjing Univ. 2010;46(1):41–46.
   Google Scholar
• Shojaei A, Abbasi F. Cure kinetics of a polymer-based composite friction material. J Appl Polym Sci. 2006;100(1):9–17. doi:10.1002/app.22465.
   Web of Science ®Google Scholar
• Claxton WE, Liska JW. Calculation of state of cure in rubber under variable time-temperature conditions. Rubber Age. 1964;95(2):237.
   Google Scholar
• Calado VMA, Advani SG. Thermoset resin cure kinetics and rheology. In: Davé RS, Loos AC, editors. Processing of composites. Cincinati/Munich: Carl Hanser Verlag GmbH & Co. KG; 2000. p. 32–107.
   Google Scholar
• Abliz D, Artys T, Ziegmann G. Influence of model parameter estimation methods and regression algorithms on curing kinetics and rheological modelling. J Appl Polym Sci. 2017;134(30):45137. doi:10.1002/app.45137.
   Web of Science ®Google Scholar
• ASTM E2070-13. Standard test method for kinetic parameters by differential scanning calorimetry using isothermal methods. West Conshohocken (PA): ASTM International. 2013. www.astm.org (last accessed January 2021).
   Google Scholar
• Kamal MR, Sourour S. Kinetics and thermal characterization of thermoset cure. Polym Eng Sci. 1973;13(1):59–64. doi:10.1002/pen.760130110.
   Web of Science ®Google Scholar
• Isayev AI, Deng JS. Nonisothermal vulcanization of rubber compounds. Rubber Chem Technol. 1988;61(2):340–361. doi:10.5254/1.3536192.
   Web of Science ®Google Scholar
• Hills DA. Heat transfer and vulcanization of rubber. London: Applied Science Publishers; 1970.
   Google Scholar
• Kruželák, J.; Sýkora, R.; Hudec, I. Sulphur and peroxide vulcanisation of rubber compounds – overview. Chem Pap. 2016, 70 (12):1533–1555.
   Web of Science ®Google Scholar
• Deng JS, Isayev AI. Injection molding of rubber compounds: experimentation and simulation. Rubber Chem Technol. 1991;64(2):296–324. doi:10.5254/1.3538560.
   Web of Science ®Google Scholar