Research status and prospect of wear and aging on hydraulic rubber sealing materials

References

• Zhao YF. High performance rubber sealing materials and their applications in aerospace industry. Aerosp Mater Technol. 2013;43(01):1–10.
   Google Scholar
• Wang CY, Qian HQ, Wu YX. Study on the development of perfluoropolyether surfactant and its application in fluororubber polymerization. Organo-Fluorine Ind. 2019;01:1–3 + 22.
   Google Scholar
• Zhao YY. Overview of application and development of hydraulic sealing technology. Lubr Eng. 2004;04:132–134.
   Google Scholar
• Liu G, Zhang YM, Tang M, et al. Study on the medium resistance and aging resistance of fluorocarbon elastomer rubber. Hydraul Pneum Seals. 2017;37(05):34–36 + 42.
   Google Scholar
• Chen JZ, Wang JH, Zhang X, et al. Compatibility，mechanical properties and thermal-oxidative aging properties of hydrogenated nitrile rubber/fluorine rubber composites. China Synth Rubber Ind. 2018;41(04):261–265.
   Google Scholar
• Wang SH, Ding XJ, Zhao YF. Aging properties of fluoroelastomer in medium environment. Aerosp Mater Technol. 2018;48(04):56–59.
   Google Scholar
• Shen MX, Zheng JP, Meng XK, et al. Fretting characteristics of fluorine rubber O-ring for reciprocating shaft seal. J Mech Eng. 2015;51(15):39–45.
   Google Scholar
• Qin WY. Failure analysis and treatment of sealing materials for 2PH plant. Chem Eng Equip. 2017;06:174–175.
   Google Scholar
• Huang X, Guo F, Ye SJ, et al. Research status and development trend of rubber and plastic sealing technology. Lubr Eng. 2020;45(06):1–6 + 21.
   Google Scholar
• Nikas GK. Eighty years of research on hydraulic reciprocating seals: review of tribological studies and related topics since the 1930s. J Eng Tribol. 2010;224(1):1–23.
   Google Scholar
• Cai RL. Fluid sealing technology–principles and engineering applications. Beijing(BJ): Chemical Industry Press; 2013.
   Google Scholar
• Ouyang XP, Xue ZQ, Peng C, et al. Performance analysis on VL seal in aircraft cylinder. J Zhejiang Univ (Eng Sci). 2015;49(9):1755–1761.
   Google Scholar
• Nikas GK. Profile optimization of hydraulic, polymeric, sliding seals by minimizing an objective function of leakage, friction and abrasive wear. Lubricants. 2020;8(4):40–66.
   Web of Science ®Google Scholar
• Sun JJ. Research on mechanism of a typical dynamic seal for hydraulic actuators [master's thesis]. Harbin(HL): Harbin Ins Technol. 2014.
   Google Scholar
• Olsen RB. Dynamic seals for advanced hydraulic systems. Dyn Seals Adv Hydraulic Sys. 1981;1(1):1–307.
   Google Scholar
• Xue ZQ. Analysis on the reciprocating seal mechanism of the aircraft hydraulic cylinder. Hangzhou(ZJ): Zhejiang University; 2016.
   Google Scholar
• Denny DF. The influence of load and surface roughness on the friction of rubber-like materials. Proc Phys Soc. 1953;66(9):721–727.
   Google Scholar
• Denny DF. Time effects in the static friction of lubricated rubber. Wear. 1959;2(4):264–272.
   Google Scholar
• Field GJ, Nau BS. A theoretical study of the elastohydrodynamic lubrication of reciprocating rubber seals. ASLE Trans. 1974;18(1):48–54.
   Google Scholar
• Ruskell LEC. A rapidly converging theoretical solution to the elastohydrodynamic problem of rectangular rubber seals. J Mech Eng Sci. 1980;22(1):9–16.
   Web of Science ®Google Scholar
• Salant RF, Maser N, Yang B. Numerical model of a reciprocating hydraulic rod seal. ASME J Tribol. 2007;129(1):91–97.
   Web of Science ®Google Scholar
• Yang B, Salant RF. Elastohydrodynamic lubrication simulation of O-ring and U-cup hydraulic seals. Proceedings of the institution of mechanical engineers. Part J: J Eng Tribol. 2011;225(7):603–610.
   Google Scholar
• Reese S, Govindjee S. Theoretical and numerical aspects in the thermos-viscoelastic material behavior of rubber-like polymers. Mech Time-Depend Mater. 1997;1(4):357–396.
   Google Scholar
• Horgan CO, Saccomandi G. Finite thermoelasticity with limiting chain extensibility. J Mech Phys Solids. 2003;51(6):1127–1146.
   Web of Science ®Google Scholar
• Wang WR, Sun ZH, Yan XQ, et al. Analysis of vane hydraulic damp static seal mechanism and performance influencing factors. Appl Mech Mater. 2012;152-154:1774–1778.
   Google Scholar
• Tan J, Yang WM, Ding YM, et al. Finite element analysis of the sealing performance of O-ring seal structure. Lubr Eng. 2006;181(9):65–69.
   Google Scholar
• Zhang YW, Shi J, Wang SP, et al. Sealing mechanism and failure analysis of actuator reciprocating seal. Proceedings of 11th Conference on Industrial Electronics and Applications. 2016. p. 2190–2195.
   Google Scholar
• Wu Q. An investigation on some issues of sealing abrasive wear and life prediction of certain type aircraft actuator. Harbin(HL): Harbin Institute of Technology; 2013.
   Google Scholar
• Ouyang XP, Liu YL, Xue ZQ, et al. Analysis of material fault of O-ring seal in aircraft cylinder. J Zhejiang Univ(Eng Sci). 2017;51(7):1361–1367.
   Google Scholar
• Field GJ, Nau BS. An experimental study of reciprocating rubber seals. Proceedings of the IMech E Symposium on Elastohydrodynamic Lubrication, UK. 1972. p. 29–36.
   Google Scholar
• Field GJ, Nau BS. Film thickness and friction measurements during reciprocating of a rectangular section rubber seal ring. Proceedings of the 6th International Conference on Fluid sealing. 1973. p. 45–56.
   Google Scholar
• Nikas GK. Elastohydrodynamics and mechanics of rectangular elastomeric seals for reciprocating piston rods. ASME J Tribol. 2003;125(1):60–69.
   Web of Science ®Google Scholar
• Stolarski TA, Tucker M. Frictional performance of an O-ring type seal at the commencement of linear motion. Tribol Lett. 1996;2(4):405–416.
   Web of Science ®Google Scholar
• Rana AS, Sayles RS, Nikas GK, et al. An experimental technique for investigating the sealing principles of reciprocating elastomeric seals for use in linear hydraulic actuator assemblies. Proceedings of the 2nd World Tribology Congress, Austria. 2001.p. 1–4.
   Google Scholar
• Rana AS, Sayles RS. An experimental study on the friction behaviour of aircraft hydraulic actuator elastomeric reciprocating seals. Tribol Interface Eng. 2005;48(05):507–515.
   Google Scholar
• Yoshimura K, Suzuki N, Mizuta H. Oil film formation of reciprocating seals observed by interferometry. Tribology Online. 2014;9(3):106–112.
   Google Scholar
• Heipl O, Murrenhoff H. Friction of hydraulic rod seals at high velocities. Tribol Int. 2015;85:66–73.
   Web of Science ®Google Scholar
• Zhao XX, Zhang SS, Wen PF, et al. Condition monitoring of reciprocating seal based on FBG sensors. Smart Mater Struct. 2016;25(7):1–10.
   Web of Science ®Google Scholar
• Shi PH, Leng JF, Zhao W, et al. Study on structural parameters and sealing performance of hydraulic bracket column combined bulk seal. Lubr Eng. 2021;46(01):80–85+93.
   Google Scholar
• Cai ZG. Leakage of common hydraulic seals and its solutions. Brick and Tile World. 2015;01:49–58.
   Google Scholar
• Hua P, Ling FJ, Zhu ZH. Compatibility of rubber and lubricating oil. Synthetic Lubricants. 2011;38(1):7–9.
   Google Scholar
• Huang X, Cai Q. The influence of hydraulic oil on the performance of sealing. Hydraul Pneum Seals. 2004;5:14–16.
   Google Scholar
• Ruan SJ, Fei YW, Wu N, et al. Analysis of compatibility of oil and sealing materials. Lubricating Oil. 2017;32(5):23–27.
   Google Scholar
• Qamar S Z, Akhtar M, Pervez T, et al. Mechanical and structural behavior of a swelling elastomer under compressive loading. Mater Des. 2013;45:487–496.
   Web of Science ®Google Scholar
• Mohammadreza M, Elisabet K, Braham P. Tribological behaviour of an elastomer aged in different oils. Tribol Int. 2008;41(9–10):860–866.
   Web of Science ®Google Scholar
• Thavamani P, Khastgir D, Bhowmick AK. Microscopic studies on the mechanisms of wear of NR, SBR and HBNR vulcanizates under different conditions. J Mater Sci. 1993;28(23):6318–6322.
   Web of Science ®Google Scholar
• Thavamani P, Bhowmick AK. Wear of tank track pad rubber vulcanizates by various rocks. Rubber Chem Technol. 1992;65(1):31–45.
   Web of Science ®Google Scholar
• Chandrasekarn M, Batchelor AW. In situ observation of sliding wear tests of butyl rubber in the presence of lubricants in an X-ray microfocus instrument. Wear. 1997;211:35–43.
   Web of Science ®Google Scholar
• Westbrook PA, French RN. Elastomer swelling in mixed associative solvents. Polym Eng Sci. 2007;47(10):1554–1568.
   Web of Science ®Google Scholar
• Zhao JW. Discussing of the non-uniform wear on hydraulic cylinder piston rings. Fluid Power Transm Control. 2010;5:51–52.
   Google Scholar
• Yang D. Structure of hydraulic snubbers of important equipment and pipe in Tianwan NPP and their maintenance. China Nucl Power. 2014;7(01):54–58.
   Google Scholar
• Xie HH, Yang JC. Feasibility study on large-loaded hydraulic snubber seal life extension used in primary equipment supports of nuclear power plants. Nucl Power Eng. 2017;38(01):85–87.
   Google Scholar
• Zhang H, Qin HY. Analysis and optimization of oil leakage of hydraulic damper. Helicopter Tech. 2017;04:49–52.
   Google Scholar
• Lu RG, Li TS, Liu XJ. Advances in study on friction-wear of rubbers. Polym Mater Sci Eng. 2002;05:12–15.
   Google Scholar
• Gawliński M. Friction and wear of elastomer seals. Archiv Civil Mech Eng. 2007;7(4):57–67.
   Web of Science ®Google Scholar
• Fan LX. Aging phenomenon and aging mechanism of rubber. Chem Eng Design Commun. 2018;44(08):54–66.
   Google Scholar
• Zhao JH, Yang R, Iervolino R, et al. The effect of thermo-oxidation on the continuous stress relaxation behavior of nitrile rubber. Polym Degrad Stab. 2015;115(5):32–37.
   Google Scholar
• Liu J, Li XB, Xu LK, et al. Investigation of aging behavior and mechanism of nitrile-butadiene rubber (NBR) in the accelerated thermal aging environment. Polym Test. 2016;54:59–66.
   Web of Science ®Google Scholar
• Thuong NT, Yamamoto Y, Nghia PT, et al. Analysis of damage in commercial natural rubber through NMR spectroscopy. Polym Degrad Stab. 2016;123(1):155–161.
   Google Scholar
• Li CJ, Ding YQ, Yang Z, et al. Compressive stress-thermo oxidative ageing behaviour and mechanism of EPDM rubber gaskets for sealing resilience assessment. Polym Test. 2020;84:106366.
   Web of Science ®Google Scholar
• Yan YY, Chai MJ. Sealing failure and fretting fatigue behavior of fittings induced by pipeline vibration. Int J Fatigue. 2020;136:105602–105602.
   Web of Science ®Google Scholar
• Tangudom P, Thongsang S, Sombatsompop N. Cure and mechanical properties and abrasive wear behavior of natural rubber, styrene–butadiene rubber and their blends reinforced with silica hybrid fillers. Mater Des. 2014;53(1):856–864.
   Google Scholar
• Xu ZB, Peng JF, Liu JH, et al. Study on fretting wear and tribo-chemical behavior of LZ50 axle steel in torsional fretting fatigue. Wear. 2019;426–427:704–711.
   Web of Science ®Google Scholar
• Zhou ZR, Nakazawa K, Zhu MH, et al. Progress in fretting maps. Tribol Int. 2006;39(10):1068–1073.
   Web of Science ®Google Scholar
• Guo YB, Zhang Z, Wang DG, et al. Fretting wear behavior of rubber against concrete for submarine pipeline laying clamping. Wear. 2019;432-433:102925.
   Web of Science ®Google Scholar
• Shen MX, Peng XD, Meng XK, et al. Fretting wear behavior of acrylonitrile-butadiene rubber (NBR) for mechanical seal applications. Tribol Int. 2016;93:419–428.
   Web of Science ®Google Scholar
• Baek DK, Khonsari MM. Friction and wear of a rubber coating in fretting. Wear. 2005;258(5-6):898–905.
   Web of Science ®Google Scholar
• Baek DK, Khonsari MM. Fretting behavior of a rubber coating: friction characteristics of rubber debris. Wear. 2006;261(10):1114–1120.
   Web of Science ®Google Scholar
• Ke LL, Zhang TF, Su J, et al. Fretting wear behavior of three kinds of rubbers under sphere-on-flat contact. Materials (Basel). 2021;14:2153.
   PubMed Web of Science ®Google Scholar
• Suh NP. The delamination theory of wear. Wear. 1973;25(1):11–124.
   Web of Science ®Google Scholar
• Wang C, Hausberger A, Berer M, et al. An investigation of fretting behavior of thermoplastic polyurethane for mechanical seal application. Polym Test. 2018;72:271–284.
   Web of Science ®Google Scholar
• Pal K, Rajasekar R, Dong JK, et al. Effect of fillers on natural rubber/high styrene rubber blends with nano silica: morphology and wear. Mater Des. 2010;31(2):677–686.
   Web of Science ®Google Scholar
• Muhr AH, Roberts AD. Rubber abrasion and wear. Wear. 1992;158(1-2):213–228.
   Web of Science ®Google Scholar
• Harsha AP, Tewari US. Two-body and three-body abrasive wear behaviour of polyaryletherketone composites. Polym Test. 2003;22(4):403–418.
   Web of Science ®Google Scholar
• Shen MX, Li B, Rong KJ, et al. Effect of abrasive size on tribological behavior of rubber sealing pair under water-lubricated conditions. Tribology. 2020;40(02):252–259.
   Google Scholar
• Song SY, Wang SJ, Nie R, et al. Swelling mechanism and its effect on abrasive wear behavior of nitrile rubber in water medium. Tribology. 2021;41(01):56–64.
   Google Scholar
• Shen MX, Zheng JP, Meng XK, et al. Influence of Al2O3 particles on the friction and wear behaviors of nitrile rubber against 316L stainless steel. J Zhejiang Univ Sci A. 2015;16(2):151–160.
   Web of Science ®Google Scholar
• Flitney B. Positive lubrication rotary seals for down-hole/ abrasive applications. Sealing Technol. 2005;2005(10):8–11.
   Google Scholar
• Ren Y, Wang N, Jiang J, et al. The application of downhole vibration factor in drilling tool reliability big data analytics - a review. ASCE-ASME J Risk Uncert Engrg Sys Part B: Mech Engrg. 2018;5(1):010801.
   Web of Science ®Google Scholar
• Yang J, Liu Z, Cheng Q, et al. The effect of wear on the frictional vibration suppression of water-lubricated rubber slat with/without surface texture. Wear. 2019;426–427:1304–1317.
   Web of Science ®Google Scholar
• Zhou Q, Li S, Zhang K, et al. Transitions of wear characteristics for rubber/steel seal pairs during the abrasive wear process. Tribol Lett. 2021;69(3):1–13.
   Web of Science ®Google Scholar
• Qin K, Zhou Q, Zhang K, et al. Effect of thermal degradation of FKM on three-body abrasion under dry sliding: severe damage led by the particle detention. Materials (Basel). 2021;14(14):3820.
   PubMed Web of Science ®Google Scholar
• Fukahori Y, Gabriel P, Busfield JJC. How does rubber truly slide between Schallamach waves and stick–slip motion? Wear. 2010;269(11):854–866.
   Web of Science ®Google Scholar
• Schapery RA. The effect of global viscoelasticity on rubber friction with Schallamach waves. Tribol Int. 2020;148:106306–106306.
   Web of Science ®Google Scholar
• Viswanathan K, Sundaram NK, Chandrasekar S. Slow wave propagation in soft adhesive interfaces. Soft Matter. 2016;12(45):9185–9201.
   PubMed Web of Science ®Google Scholar
• Cui ZB, Su ZQ, Hou DD, et al. From small wrinkles to Schallamach waves during rubber friction: In situ experiment and 3D simulation. Polym Test. 2021;96:107084.
   Web of Science ®Google Scholar
• Budinski KG. Adhesive transfer to abrasive particles in abrasion testing. Wear. 2011;271(9-10):1258–1263.
   Web of Science ®Google Scholar
• Schallamach A. Abrasion pattern on rubber. Rubber Chem Technol. 1953;26(1):230–241.
   Google Scholar
• Chen XF, Kong YR, Wang MY, et al. Wear and aging behavior of vulcanized natural rubber nanocomposites under high-speed and high-load sliding wear conditions. Wear. 2022;498-499:204341.
   Web of Science ®Google Scholar
• Li B, Li SX, Shen MX, et al. Tribological behaviour of acrylonitrile-butadiene rubber under thermal oxidation ageing. Polym Test. 2020;93:106954.
   Web of Science ®Google Scholar
• Hu G, Ma JB, Yuan GJ, et al. Effect of hard particles on the tribological properties of hydrogenated nitrile butadiene rubber under different lubricated conditions. Tribol Int. 2022;169:107457.
   Web of Science ®Google Scholar
• Briggs GAD, Briscoe BJ. How rubber grips and slips Schallamach waves and the friction of elastomers. Philos Mag A. 1978;38(4):387–399.
   Web of Science ®Google Scholar
• Loo MS, Le Cam JB, Andriyana A, et al. Effect of swelling on fatigue life of elastomers. Polym Degrad Stab. 2016;124:15–25.
   Web of Science ®Google Scholar
• Guo F, Jia XH, Lv MD, et al. The effect of aging in oil on the performance of a radial lip seal. Tribol Int. 2014;78:187–194.
   Web of Science ®Google Scholar
• Dong CL, Yuan CQ, Bai XQ, et al. Tribological properties of aged nitrile butadiene rubber under dry sliding conditions. Wear. 2015;322-323:226–237.
   Web of Science ®Google Scholar
• Yuan CQ, Li J, Yan XP, et al. The use of the fractal description to characterize engineering surfaces and wear particles. Wear. 2003;255(1):315–326.
   Google Scholar
• Yuan CQ, Peng Z, Zhou XC, et al. The surface roughness evolutions of wear particles and wear components under lubricated rolling wear condition. Wear. 2005;259(1-6):512–518.
   Web of Science ®Google Scholar
• Chen QX, Huang W, Ren ZY, et al. Fatigue mechanical characteristics and experimental study of O-shaped metal rubber seals with large ring diameter ratio. Tribology. 2021;41(3):293–303.
   Google Scholar
• Chen P. Study on mechanism of precrack propagation in stator rubber of screw pump during wear. Shenyang(LN): Shenyang University of Technology; 2017.
   Google Scholar
• Kittur MI, Andriyana A, Ang BC, et al. Swelling of rubber in blends of diesel and cottonseed oil biodiesel. Polym Test. 2021;96:107116.
   Web of Science ®Google Scholar
• Linhares FN, Corrêa HL, Khalil CN, et al. Study of the compatibility of nitrile rubber with Brazilian biodiesel. Energy. 2013;49:102–106.
   Web of Science ®Google Scholar
• Nie R, Song S, Wang S. Interaction between swelling behavior and erosion resistance of nitrile-butadiene rubber vulcanizates in sodium chloride solution. Mater Res Express. 2019;6(7):075330–075340.
   Web of Science ®Google Scholar
• Lv XR, Wang HM, Wang SJ. Effect of swelling nitrile rubber in cyclohexane on its ageing, friction and wear characteristics. Wear. 2015;328-329:414–421.
   Web of Science ®Google Scholar
• Han RJ, Wu Y, Quan XD, et al. Effects of crosslinking densities on mechanical properties of nitrile rubber composites in thermal oxidative aging environment. J Appl Polym Sci. 2020;137(36):49076).
   Web of Science ®Google Scholar
• Rezig N, Bellahcene T, Aberkane M, et al. Thermo-oxidative ageing of a SBR rubber: effects on mechanical and chemical properties. J Polym Res. 2020;27(11):339.
   Web of Science ®Google Scholar
• Sun YK, Huang JZ, He JW, et al. Effects of a novel hindered phenol samarium complex on the thermo-oxidative aging of styrene-butadiene rubber/silica composites. Polym Degrad Stab. 2021;185:109482.
   Web of Science ®Google Scholar
• Lou WT, Zhang WF, Wang HX, et al. Influence of hydraulic oil on degradation behavior of nitrile rubber O-rings at elevated temperature. Eng Fail Anal. 2018;92:1–11.
   Web of Science ®Google Scholar
• Choi SS, Kim JC. Lifetime prediction and thermal aging behaviors of SBR and NBR composites using crosslink density changes. J Ind Eng Chem. 2012;18(3):1166–1170.
   Web of Science ®Google Scholar
• Labouriau A, Cady C, Gill J, et al. Gamma irradiation and oxidative degradation of a silica-filled silicone elastomer. Polym Degrad Stab. 2015;116:62–74.
   Web of Science ®Google Scholar
• Lu M, Wang Z, Qian HH, et al. Influence of fillers and surface treatment on the properties of fluoroelastomers sealing materials. World Rubber Ind. 2016;43(05):29–33.
   Google Scholar
• Qi M, Jia XZ, Wang GF, et al. Research on high temperature friction properties of PTFE/fluorosilicone rubber/silicone rubber. Polym Test. 2020;91:106817.
   Web of Science ®Google Scholar
• Guo H, Jerrams S, Xu Z, et al. Enhanced fatigue and durability of carbon black/natural rubber composites reinforced with graphene oxide and carbon nanotubes. Eng Fract Mech. 2019;223:106764.
   Web of Science ®Google Scholar
• Liu JQ. Study on magnetron sputtering parameters and sealing performance of DLC film on rubber surface. Haikou(HI): Hainan University; 2019.
   Google Scholar
• Shen MX, Zhang ZX, Peng XD, et al. Microstructure evolution and tribological properties of acrylonitrile–butadiene rubber surface modified by atmospheric plasma treatment. Appl Phys A. 2017;123(9):601.
   Web of Science ®Google Scholar
• Zhu ZM, Xia Y, Niu GG, et al. Effect of direct fluorination on the mechanical and scratch performance of nitrile butadiene rubber. Wear. 2017;376-377:1314–1320.
   Web of Science ®Google Scholar
• Hassankhani H, Atashi H, Mohebbi-Kalhori D. Reducing of heat loss of rubber compound using natural zeolite filler: effect of partially substitution of fillers on compound properties. Iran Polym J. 2018;27(8):555–561.
   Web of Science ®Google Scholar
• Zheng XR, Kim S, Park CW. Corrigendum to ‘enhancement of thermal conductivity of carbon fiber-reinforced polymer composite with copper and boron nitride particles’. Compos Part A: Appl Sci Manuf. 2019;121:449–456. Composites Part A: Applied Science and Manufacturing. 2019;125:105526.
   Web of Science ®Google Scholar
• Wu Q, Zhang W. Discussion on technical improvement and development of hydraulic seal industry. Econ Outlook Around Bohai Sea. 2017;08:195.
   Google Scholar
• Cai ZY. Structural optimization and fatigue life prediction of reciprocating O-ring for high pressure aeronautical actuator. Hangzhou(ZJ): Zhejiang University of Technology; 2019.
   Google Scholar
• Chen MZ, Wang SL, Jiang MZ, et al. Experimental evaluation and mechanism analysis of elastomer failure caused by rapid gas decompression. Chem Mach. 2021;48(02):193–198.
   Google Scholar
• Fei JJ. Rapid decompression of gas inside sealing material in underwater pressurization system. China Rubber/Plast Technol Equip. 2022;48(5):10–13.
   Google Scholar
• Patel H, Salehi S, Ahmed R, et al. Review of elastomer seal assemblies in oil & gas wells: performance evaluation, failure mechanisms, and gaps in industry standards. J Pet Sci Eng. 2019;179:1046–1062.
   Web of Science ®Google Scholar
• Jia JH, Wu HW, Hua HX. Application investigation of the elastomer damper in nuclear power plants. Appl Mech Mater. 2014;488-489:1189–1192.
   Google Scholar
• Farfán-Cabrera LI, Pérez-González J, Gallardo-Hernández EA. Deterioration of seals of automotive fuel systems upon exposure to straight Jatropha oil and diesel. Renew Energy. 2018;127:125–133.
   Web of Science ®Google Scholar
• Zhang X, Wang J, Jia H, et al. Polyvinyl pyrrolidone modified graphene oxide for improving the mechanical, thermal conductivity and solvent resistance properties of natural rubber. RSC Adv. 2016;6(60):54668–54678.
   Web of Science ®Google Scholar
• Zhu QQ, Wang ZH, Zeng H, et al. Effects of graphene on various properties and applications of silicone rubber and silicone resin. Composites Part A. 2021;142(6):106240.
   Google Scholar
• Rocha E, Sousa A, Furtado C. Properties investigation of novel nitrile rubber composites with rockwool fibers. Polym Test. 2020;82:106291.
   Web of Science ®Google Scholar
• Salleh SZ, Ahmad MZ, Ismail H. Properties of natural rubber/recycled chloroprene rubber blend: effects of blend ratio and matrix. Procedia Chem. 2016;19:346–350.
   Google Scholar
• Jza B, Xj A, Qiang HB. Mechanical, thermal, and friction properties of addition-type fluororubber co-filled with Al2O3 particles at high temperature. Polym Test. 2021;96:107131.
   Web of Science ®Google Scholar
• Zong XM, Liu W, Feng S, et al. Preparation and wear resistance of DLC films on polyurethane rubber. Surf Technol. 2019;48(10):190–195+229.
   Google Scholar
• Azizi S, Momen G, Ouellet-Plamondon C, et al. Performance improvement of EPDM and EPDM/silicone rubber composites using modified fumed silica, titanium dioxide and graphene additives. Polym Test. 2020;84:106281.
   Web of Science ®Google Scholar
• Jing W, Li H, Lin Z, et al. In situ preparation of reduced graphene oxide reinforced acrylic rubber by self-assembly. J Appl Polym Sci. 2019;136(11):47187–47192.
   Web of Science ®Google Scholar
• Xiao J. On the structure of hydraulic properties of rubber seals and the use. Prod Technol. 2010;03:94–100.
   Google Scholar
• Shen MX, Li B, Li SX, et al. Effect of particle concentration on the tribological properties of NBR sealing pairs under contaminated water lubrication conditions. Wear. 2020;456-457(2):203381.
   Google Scholar
• Xu PS. Abrasive wear failure behaviors of rubber seal in particle-contained aqueous medium. Hangzhou(ZJ): Zhejiang University of Technology; 2019.
   Google Scholar
• Zhang JQ, Jia XZ, Guan YH, et al. Study on high temperature friction properties of fluorine rubber filled with alumina in oil-deficient environment. Lubr Eng. 2022;47(06):108–115.
   Google Scholar