References
- Sundaresan P, Singh G, Rao V. Buckling and post-buckling analysis of moderately thick laminated rectangular plates. Comput Struct. 1996;61(1):79–86.
- Baba BO, Baltaci A. Buckling characteristics of symmetrically and antisymmetrically laminated composite plates with central cutout. Appl Compos Mater. 2007;14:265–276.
- Ghannadpour SAM, Najafi A, Mohammadi B. On the buckling behavior of cross ply laminated composite plates owing to circular/elliptical cutouts. Compos Struct. 2006;75:3–6.
- Sahoo S. Buckling characteristics of cut-out borne composite stiffened hyperbolic paraboloid shell panel. J Mater Des Appl. 2021;0:1–19.
- Mandal SK, Mishra PK. Buckling analysis of rectangular plate element subjected to in-plane loading using finite element method. Int J Sci Eng Res. 2018;9(4):70–79.
- Allahbakhsh H, Dadrasi A. Buckling analysis of laminated composite panel with elliptical cutout subject to axial compression. Modell Simul Eng. 2012;2012:1–10.
- Akbulut H, Sayman O. An investigation on buckling of laminated plates with central square hole. J Reinf Plast Compos. 2001;20:1112–1124.
- Komur MA, Sen F, Atas A, et al. Buckling analysis of laminated composite plates with an elliptical/circular cutout using FEM. Adv Eng Softw. 2010;41:161–164.
- Baltaci A, Sarikanat M, Yildiz H. Buckling analysis of laminated composite circular plates with holes. J Reinf Plast Compos. 2006;25:733–744.
- Hongzhi Z, Chao G. Buckling of symmetrical cross-ply composite rectangular plates under a linearly varying in-plane load. Compos Struct. 2007;80:42–48.
- Cagdas IU, Adali S. Buckling of cross-ply laminates subject to linearly varying compressive loads and in-plane boundary restraints. J Thermoplast Compos Mater. 2011;26(2):193–215.
- Shariyat M, Asemi K. 3D B-spline finite element nonlinear elasticity buckling analysis of rectangular FGM plates under non-uniform edge loads, using a micromechanical model. Compos Struct. 2014;112:397–408.
- Panda KS, Ramachandra LS. Buckling and post-buckling behavior of cross-ply composite plate subjected to nonuniform in-plane loads. J Eng Mech. 2011;137(9):589–597.
- Narayana AL, Rao K, Kumar RV. Buckling analysis of rectangular composite plates with rectangular cutout subjected to linearly varying in-plane loading using fem. Ind Acad Sci. 2014;39(3):583–596.
- Chandra SKS, Rananna T, Rao KV. A parametric study on the effect of elliptical cutouts for buckling behavior of composite plates under non-uniform edge loads. Latin Am J Solids Struct. 2020;17(8):1–15.
- Abolghasemi S, Eipakchi H, Shariati M. An analytical solution for buckling of plates with circular cutout subjected to non-uniform in-plane loading. Arch Appl Mech. 2019;89:2519–2543.
- Komur MA, Sonmez M. Elastic buckling behavior of rectangular plates with holes subjected to partial edge loading. J Constr Steel Res. 2015;112:54–60.
- Sundaresan P, Singh G, Rao GV. Buckling of moderately thick rectangular composite plates subjected to partial edge compression. Int J Mech Sci. 1998;40(11):1105–1117.
- Srivastava AKL, Datta PK, Sheikh AH. Buckling and vibration of stiffened plates subjected to partial edge loading. Int J Mech Sci. 2003;45:73–93.
- Dey T, Ramachandra LS. Static and dynamic instability analysis of composite cylindrical shell panels subjected to partial edge loading. Int J Non-Linear Mech. 2014;64(46):56.
- Boley BA, Weiner JJ. Theory of thermal stresses. New York: John Wiley; 1960.
- Ghomshei MMM, Mahmoudi A. Thermal buckling analysis of cross-ply laminated rectangular plates under nonuniform temperature distribution: a differential quadrature approach. J Mech Sci Technol. 2010;24(12):2519–2527.
- Chen LW, Chen LY. Thermal buckling of laminated composite plates. J Therm Stresses. 1987;10:345–356.
- Huang NN, Tauchert TR. Thermal buckling of clamped symmetric laminated plates. Thin-Walled Struct. 1992;13:259–273.
- Lal A, Markad K. Influence of dynamic temperature variation and inplane varying loads over post-buckling and free vibration analysis of sandwich composite beam. Int J Comput Mater Sci Eng. 2020;9(3):1–27.
- Shiau LC, Kuo SY, Chen CY. Thermal buckling behavior of composite laminated plates. Compos Struct. 2010;92:508–514.
- Thangaratnam KR, Palaninathan, Ramachandran J. Thermal buckling of composite laminated plates. Comput Struct. 1989;32(5):1117–1124.
- Chen WJ, Lin PD, Chen LW. Thermal buckling behavior of thick composite laminated plates under nonuniform temperature distribution. Comput Struct. 1991;41(4):637–645.
- Narayana AL, Kumar RV, Rao GK. Thermal buckling analysis of laminated composite plate with square/rectangular, elliptical/circular cutout. Mater Today Proc. 2018;5:5354–5363.
- Chhorn B, Jung WY. A parametric study on the elliptical hole effects of laminated composite plates under thermal buckling load. Sci Eng Compos Mater. 2020;27:196–203.
- Shaterzadeh AR, Abolghasemi S, Rezaei R. Finite element analysis of thermal buckling of rectangular laminated composite plates with circular cut-out. J Therm Stresses. 2014;37:604–623.
- Avci A, Kaya S, Daghan B. Thermal buckling of rectangular laminated plates with a hole. J Reinf Plast Compos. 2005;24(3):259–272.
- Erklig A, Yeter E. On the thermal buckling behavior of laminated hybrid composite plates owing to square/circular cut-outs. Math Comput Appl. 2013;18(3):548–557.
- Sahin OS. Thermal buckling of hybrid angle-ply laminated composite plates with a hole. Compos Sci Technol. 2005;65:1780–1790.