References
- Choi, Y., & Kim, Y.R. (2013a). Development of calibration testing protocol for the permanent deformation model of asphalt. In Transportation research record: Journal of the transportation research board, no. 2373 (Vol. 4, pp. 34–43). Washington, DC: Transportation Research Board of the National Academies.
- Choi, Y., & Kim, Y.R. (2013b). Development of characterisation models for incremental permanent deformation model for asphalt concrete in confined compression. Road Materials and Pavement Design, 14, 266–288. doi: 10.1080/14680629.2013.812847
- Coleri, E., Harvey, J.T., Yang, K., & Boone, J.M. (2012a). A micromechanical approach to investigate asphalt concrete rutting mechanisms. Journal of Construction and Building Materials, 30, 36–49. doi: 10.1016/j.conbuildmat.2011.11.041
- Coleri, E., Wu, R., Signore, J.M., & Harvey, J.T. (2012b). Rutting of rubberized gap graded and polymer modified dense graded asphalt overlays in composite pavements. In Transportation research record: Journal of the transportation research board, no. 2304 (pp. 195–204). Washington, DC: Transportation Research Board of the National Academies.
- Eslaminia, M., Thirunavukkarasu, S., Guddati, M.N., & Kim, Y.R. (2012). Accelerated pavement performance modeling using layered viscoelastic analysis. Proceedings of the 7th international RILEM conference on cracking in pavements, Delft, The Netherlands.
- Gibson, N., Qi, X., Shenoy, A., Al-Khateeb, G., Kutay, M. E., … Harman, T. (2012). Performance testing on superpave and structural validation (Report No.: FHWA-HRT-11-042). Research, Development, and Technology Turner-Fairbank Highway Research Center.
- Gokhale, S., Choubane, B., Byron, T., & Tia, M. (2005). Rut initiation mechanisms in asphalt mixtures as generated under accelerated pavement testing. In Transportation research record: Journal of the transportation research board, no. 1940 (pp. 136–145). Washington, DC: Transportation Research Board of the National Academies.
- Harvey J., Lee, T., Sousa, J., Pak, J., & Monismith, C.L. (1994). Evaluation of fatigue and permanent deformation properties of several asphalt-aggregate field mixes using strategic highway research program A-003A equipment. In Transportation research record: Journal of the transportation research board, no. 1454 (pp. 123–133). Washington, DC: Transportation Research Board of the National Academies.
- Harvey, J.T., & Popescu, L. (2000). Rutting of caltrans asphalt concrete and asphalt-rubber hot mix under different wheels, tyres and temperatures – accelerated pavement testing evaluation. Berkeley: Pavement Research Center, Institute of Transportation Studies, University of California.
- Knappet, J.A., & Craig, R.F. (2012). Craig's soil mechanics (8th ed.). London: Taylor and Francis.
- LaCroix, A. (2012). Performance prediction of the NCAT test track pavements using mechanistic models (Ph.D. dissertation). Raleigh, NC: North Carolina State University.
- NCHRP 1-37A. (2004). Guide for mechanistic-empirical design of new and rehabilitated pavement structures (NCHRP 1-37A Report). Transportation Research Record: Journal of the Transportation Research Board. Washington, DC: Transportation Research Board of the National Academies.
- Von Quintus, H.L., Mallela, J., Bonaquist, R., Schwartz, C.W., & Carvalho, R.L. (2012). Calibration of rutting models for structural and mix design (NCHRP Report 719). Washington, DC.
- West, R., Timm, D., Willis, R., Powell, B., Tran, N., Watson, D., … Nelson, J. (2012). Phase IV NCAT pavement test track findings (NCAT Draft Report). Auburn, AL.
- Yun, T. (2008). Development of a viscoplastic constitutive model using a rate-dependent yield criterion for HMA in compression (Ph.D. dissertation). Raleigh, NC: North Carolina State University.