The use of non-conventional materials in asphalt pavements base

References

• AASHTO International. (2007). American Society for Testing and Materials T 307/99 – standard method of test for determining the resilient modulus of soils and aggregate materials. USA.
   Google Scholar
• ABNT. (1984a). Associação Brasileira de Normas Técnicas NBR 7181 – Análise granulométrica [Brazilian Association of Technical Standards NBR 7181 – grain size analysis]. Brazil.
   Google Scholar
• ABNT. (1984b). Associação Brasileira de Normas Técnicas NBR 6508 – Grãos de solos que passam na peneira de 4,8 mm – Determinação da massa específica [Brazilian Association of Technical Standards NBR 6508 – specific mass determination]. Brazil.
   Google Scholar
• ABNT. (1984c). Associação Brasileira de Normas Técnicas NBR 6459 – Solo -Determinação do limite de liquidez [Brazilian Association of Technical Standards NBR 6459 – soil – liquid limit determination]. Brazil.
   Google Scholar
• ABNT. (1984d). Associação Brasileira de Normas Técnicas NBR 7180 – Solo – Determinação do limite de plasticidade [Brazilian Association of Technical Standards NBR 7180 – soil – plasticity limit determination]. Brazil.
   Google Scholar
• ABNT. (1984e). Associação Brasileira de Normas Técnicas NBR 7182 – Solo – Ensaio de compactação [Brazilian Association of Technical Standards NBR 7182 – soil – compaction test]. Brazil.
   Google Scholar
• ABNT. (1987). Associação Brasileira de Normas Técnicas NBR 9895 – Solo Índice de Suporte Califórnia [Brazilian Association of Technical Standards NBR 9895 – soil – California bearing ratio]. Brazil.
   Google Scholar
• ASTM International. (2003). American Society for Testing and Materials D-6951 – standard test method for use of the dynamic cone penetrometer in shallow pavement applications. USA.
   Google Scholar
• DNER. (1994). Departamento Nacional de Estradas de Rodagem, ME 258: Solos compactados em equipamento miniatura Mini-MCV – Método de Ensaio [National Department of Highway, ME 258: Soil compacted miniature equipment Mini-MCV – test method]. Rio de Janeiro, Brazil.
   Google Scholar
• DNIT. (1994a). Departamento Nacional de Infraestrutura de Transportes, ME 52: Solos e agregados miúdos- determinação da umidade com emprego do “Speedy”. Método de Ensaio [National Department of Transport Infrastructure, ME 52: Soils and fine aggregates –determination of moisture water content with the Speedy test]. Rio de Janeiro, Brazil.
   Google Scholar
• DNIT. (1994b). Departamento Nacional de Infraestrutura de Transportes, ME 92: Solo – Determinação da massa especifica aparente “in situ”, com emprego do frasco de areia. Método de Ensaio [National Department of Transport Infrastructure, ME 92: Soil-determination of apparent specific gravity “in situ” with use of sand bottle]. Rio de Janeiro, Brazil.
   Google Scholar
• DNIT. (1994c). Departamento Nacional de Infraestrutura de Transportes, ME 24: Pavimento – Determinação das deflexões pela viga Benkelman – Método de Ensaio. [National Department of Transport Infrastructure, ME 24: Pavement – determination of the Benkelman beam deflections – test method]. Rio de Janeiro, Brazil.
   Google Scholar
• DNIT. (1997). Departamento Nacional de Infraestrutura de Transportes, ES 303: Pavimentação – base estabilizada granulometricamente, Especificação serviço [National Department of Transport Infrastructure, ES 303: Paving – particle size stabilized base, service specification]. Rio de Janeiro, Brazil.
   Google Scholar
• DNIT. (2010). Departamento Nacional de Infraestrutura de Transportes, ME 133: Pavimentação asfáltica – Delineamento da linha de influência longitudinal da bacia de deformação por intermédio da Viga Benkelman – Método de ensaio [National Department of Transport Infrastructure, ME 133: Asphalt paving – delineation of the influence of longitudinal deformation of the basin through the Benkelman beam – test method]. Rio de Janeiro, Brazil.
   Google Scholar
• Ferreira, J. G. H. M. (2002). Elaboração e Análise da Base de Dados de Ensaios Triaxiais Dinâmicos da COPPE/UFRJ (Unpublished master's thesis). COPPE, Universidade Federal do Rio de Janeiro, Rio de Janeiro.
   Google Scholar
• Gidigasu, M. D. (1976). Laterite soil engineering: Pedogenesis and engineering principles. Amsterdam: Elsevier.
   Google Scholar
• Herrin, M., & Mitchell, H. (1961). Soil lime mixtures. Highway Research Board, 262, 20–32.
   Google Scholar
• Huang, Y. H. (2004). Pavement analysis and design. Englewood Cliffs, NJ: Prentice Hall.
   Google Scholar
• Huseyin, A., & Gurer, C. (2007). Use of aggregates produced from marble quarry waste in asphalt pavements. Afyonkarahisar: Department of Construction, Teknical Education Faculty, Afyon Kocatepe University.
   Google Scholar
• Little, D. (1995). Handbook for stabilization of pavement subgrades and base courses with lime (219 pp.). Dubuque, IA: Kendall Hunt.
   Google Scholar
• Medina, J., & Motta, L. M. G. (2005). Mecânica dos pavimentos [Mechanic of pavements] (2nd ed., 570 pp.). Rio de Janeiro, RJ.
   Google Scholar
• Montoya, C. A. H., Pandales, C. A., Valdés, B. A. P., & Moreno, M. A. R. (2010). Comportamiento de una pista experimental de pavimento flexible con base estabilizada con cal [Behavior of an experimental track of flexible pavement with lime stabilized base]. Revista Ingenierías Universidad de Medellín, 9(16), 37–47.
   Google Scholar
• Nogami, J. S., & Villibor, D. F. (1991). Use of lateritic fine-grained soils in road pavement base courses. Geotechnical & Geological Engineering, 9(3–4), 167–182. doi: 10.1007/BF00881739
   Google Scholar
• de Rezende, L. R. (2003). Estudo de comportamento de materiais alternativos utilizados em estruturas de pavimentos flexíveis (372f) (Unpublished doctoral thesis). Brasília: Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, Universidade de Brasília.
   Google Scholar
• de Rezende, L. R., & de Carvalho, J. C. (2003). The use of quarry waste in pavement construction. Resources, Conservation and Recycling, 39(1), 91–105. doi: 10.1016/S0921-3449(02)00123-4
   Web of Science ®Google Scholar
• de Rezende, L. R., da Silveira, L. R., de Araújo, W. L., & da Luz, M. P. (2014). Reuse of fine quarry wastes in pavement: Case study in Brazil. Journal of Materials in Civil Engineering, 26(8), 05014003. Retrieved from http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0000997 doi: 10.1061/(ASCE)MT.1943-5533.0000997
   Google Scholar
• Sirigiripet, S. K. (2007). Experimental and field studies on recycled materials as pavement bases. Arlington: Faculty of the Graduate School of the University of Texas at Arlington.
   Google Scholar
• Toohey, N. M., & Mooney, M. A. (2012). Seismic modulus growth of lime-stabilised soil during curing. Geotechnique, 62(2), 161–170. doi:10.1680/geot.9.P.122
   Web of Science ®Google Scholar
• TRB. (1976). State-of-the-art: Lime stabilization: Reactions, properties, design, construction (31 pp.). Washington, DC: Transportation Research Board.
   Google Scholar
• Willis, M. R. (2003). The effect of filler loading and process route on the three-point bend performance of waste based composites. Swansea: Department of Materials Engineering, Interdisciplinary Research Centre, School of Engineering, University of Wales Swansea.
   Google Scholar