Technological and environmental performance of temperature-reduced mastic asphalt mixtures

References

• Biro, S., Gandhi, T., & Amirkhanian, S. (2009). Midrange temperature rheological properties of warm asphalt binders. Journal of Materials in Civil Engineering, 21(7), 316–323. doi: 10.1061/(ASCE)0899-1561(2009)21:7(316)
   Web of Science ®Google Scholar
• Brunner, P. H., & Rechberger, H. (2004). Practical handbook of material flow analysis. Boca Raton, FL: CRC/Lewis.
   Google Scholar
• Cabeza, L. F., Rincon, L., Vilarino, V., Perez, G., & Castell, A. (2014). Life cycle assessment (LCA) and life cycle energy analysis (LCEA) of buildings and the building sector: A review. Renewable & Sustainable Energy Reviews, 29, 394–416. doi: 10.1016/j.rser.2013.08.037
   Web of Science ®Google Scholar
• Cachier, H., Bremond, M. P., & Buat-Menard, P. (1989). Determination of atmospheric soot carbon with a simple thermal method. Tellus Series B-Chemical and Physical Meteorology, 41(3), 379–390. doi: 10.1111/j.1600-0889.1989.tb00316.x
   Web of Science ®Google Scholar
• Canada, N. R. (2005). Road rehabilitation energy reduction guide for Canadian road builders. Quebec, Canada: Canadian Industry Program for Energy Conservation.
   Google Scholar
• Capitao, S. D., Picado-Santos, L. G., & Martinho, F. (2012). Pavement engineering materials: Review on the use of warm-mix asphalt. Construction and Building Materials, 36, 1016–1024. doi: 10.1016/j.conbuildmat.2012.06.038
   Web of Science ®Google Scholar
• Cardone, F., Pannunzio, V., Virgili, A., & Barbati, S. (2009). An evaluation of use of synthetic waxes in warm mix asphalt. Advanced Testing and Characterisation of Bituminous Materials, 1 and 2, 627–638.
   Google Scholar
• Cavalli, F., Viana, M., Yttri, K. E., Genberg, J., & Putaud, J. P. (2010). Toward a standardised thermal-optical protocol for measuring atmospheric organic and elemental carbon: The EUSAAR protocol. Atmospheric Measurement Techniques, 3(1), 79–89. doi: 10.5194/amt-3-79-2010
   Web of Science ®Google Scholar
• CEN. (2005). EN 12697-25: Bituminous mixtures – test methods for hot mix asphalt – Part 25: Cyclic compression test. Brussels: Author.
   Google Scholar
• CEN. (2012). EN 12697-46: Bituminous mixtures – test methods for hot mix asphalt – Part 46: Low temperature cracking and properties by uniaxial tension tests. Brussels: Author.
   Google Scholar
• CEN. (2013). EN 13108-6: Bituminous mixtures – material specifications – Part 6: Mastic asphalt. Brussels: Author.
   Google Scholar
• Edwards, Y. (2009). Influence of waxes on bitumen and asphalt concrete mixture performance. Road Materials and Pavement Design, 10(2), 313–335. doi: 10.1080/14680629.2009.9690197
   Web of Science ®Google Scholar
• Edwards, Y., Tasdemir, Y., & Isacsson, U. (2006). Effects of commercial waxes on asphalt concrete mixtures performance at low and medium temperatures. Cold Regions Science and Technology, 45(1), 31–41. doi: 10.1016/j.coldregions.2006.01.002
   Web of Science ®Google Scholar
• Hansen, E. S. (1991). Mortality of mastic asphalt workers. Scandinavian Journal of Work Environment & Health, 17(1), 20–24. doi: 10.5271/sjweh.1739
   PubMed Web of Science ®Google Scholar
• Hellweg, S., & iCanals, L. M. (2014). Emerging approaches, challenges and opportunities in life cycle assessment. Science, 344(6188), 1109–1113. doi: 10.1126/science.1248361
   PubMed Web of Science ®Google Scholar
• Hofko, B., Dimitrov, M., & Hospodka, M. (2015). Assessing temperature reduction potential of various additives on binder and asphalt mix level for mastic asphalt. In Proceedings of the 8th international conference on bituminous mixtures and pavements. Thessaloniki, Greece: Aristotle University of Thessaloniki.
   Google Scholar
• Hofko, B., Dimitrov, M., Schwab, O., & Weiss, F. (2015). High efficient low emission mastic asphalt – final report. Vienna: Austrian Research Promotion Agency.
   Google Scholar
• Hunkeler, D., Lichtenvort, K., Rebitzer, G., Ciroth, A., & Europe, S. (2008). Environmental life cycle costing. Pensacola, FL: SETAC, CRC Press.
   Google Scholar
• Kriech, A. J., & Osborn, L. V. (2014). Review and implications of IARC monograph 103 outcomes for the asphalt pavement industry. Road Materials and Pavement Design, 15(2), 406–419. doi: 10.1080/14680629.2013.867893
   Web of Science ®Google Scholar
• Medani, T. O., Huurman, M., Liu, X. Y., Scarpas, A., & Molenaar, A. A. A. (2007). Describing the behaviour of two asphaltic surfacing materials for orthotropic steel deck bridges. Advanced Characterisation of Pavement Soil Engineering Materials, 1 & 2, 1351–1368.
   Google Scholar
• Merusi, F., & Giuliani, F. (2011). Rheological characterization of wax-modified asphalt binders at high service temperatures. Materials and Structures, 44(10), 1809–1820. doi: 10.1617/s11527-011-9739-4
   Web of Science ®Google Scholar
• Pope, C. A., & Dockery, D. W. (2006). Health effects of fine particulate air pollution: Lines that connect. Journal of the Air & Waste Management Association, 56(6), 709–742. doi: 10.1080/10473289.2006.10464485
   Web of Science ®Google Scholar
• Riehmann, P., Hanfler, M., & Froehlich, B. (2005). Interactive Sankey diagrams. In Proceedings of INFOVIS 05: IEEE symposium on information visualization (pp. 233–240), Washington, DC: IEEE Computer Society.
   Google Scholar
• Rubio, M. C., Martinez, G., Baena, L., & Moreno, F. (2012). Warm mix asphalt: An overview. Journal of Cleaner Production, 24, 76–84. doi: 10.1016/j.jclepro.2011.11.053
   Web of Science ®Google Scholar
• Ruhl, R., Musanke, U., Kolmsee, K., Priess, R., & Breuer, D. (2007). Bitumen emissions on workplaces in Germany. Journal of Occupational and Environmental Hygiene, 4, 77–86. doi: 10.1080/15459620701335019
   Web of Science ®Google Scholar
• Schmidl, C., Marr, L. L., Caseiro, A., Kotianova, P., Berner, A., Bauer, H., Kasper-Giebla, A, Puxbaum, H. (2008). Chemical characterisation of fine particle emissions from wood stove combustion of common woods growing in mid-European Alpine regions. Atmospheric Environment, 42(1), 126–141. doi: 10.1016/j.atmosenv.2007.09.028
   Web of Science ®Google Scholar
• Schmidt, M. (2008a). The sankey diagram in energy and material flow management. Journal of Industrial Ecology, 12(1), 82–94. doi: 10.1111/j.1530-9290.2008.00004.x
   Web of Science ®Google Scholar
• Schmidt, M. (2008b). The Sankey diagram in energy and material flow management – Part II: Methodology and current applications. Journal of Industrial Ecology, 12(2), 173–185. doi: 10.1111/j.1530-9290.2008.00015.x
   Web of Science ®Google Scholar
• Silva, H. M. R. D., Oliveira, J. R. M., Peralta, J., & Zoorob, S. E. (2010). Optimization of warm mix asphalts using different blends of binders and synthetic paraffin wax contents. Construction and Building Materials, 24(9), 1621–1631. doi: 10.1016/j.conbuildmat.2010.02.030
   Web of Science ®Google Scholar
• Vandenoosterkamp, P. F., Goorse, A. A., & Blomen, L. J. M. J. (1993). Review of an energy and exergy analysis of a fuel-cell system. Journal of Power Sources, 41(3), 239–252. doi: 10.1016/0378-7753(93)80042-N
   Web of Science ®Google Scholar
• Widyatmoko, I., Elliott, R. C., & Read, J. M. (2005). Development of heavy-duty mastic asphalt bridge surfacing, incorporating Trinidad Lake Asphalt and polymer modified binders. Road Materials and Pavement Design, 6(4), 469–483. doi: 10.1080/14680629.2005.9690016
   Web of Science ®Google Scholar
• Wu, C. F., & Zeng, M. L. (2012). Effects of additives for warm mix asphalt on performance grades of asphalt binders. Journal of Testing and Evaluation, 40(2), 265–272. doi: 10.1520/JTE104279
   Web of Science ®Google Scholar