Quantitative characterisation of asphalt’s composition–microstructure relationship based on atomic force microscopy, differential scanning calorimetry, and Fourier transform infrared spectroscopy tests

References

• Allen, R. G., Little, D. N., Bhasin, A., & Lytton, R. L. (2013). Identification of the composite relaxation modulus of asphalt binder using AFM nanoindentation. Journal of Materials in Civil Engineering, 25, 530–539. doi: 10.1061/(ASCE)MT.1943-5533.0000615
   Web of Science ®Google Scholar
• American Society for Testing and Materials. (2009). Standard test method for separation of asphalt into four fractions. D 4124-09.
   Google Scholar
• Amin, J. S., Nikooee, E., Ghatee, M. H., Ayatollahi, S., Alamdari, A., & Sedghamiz, T. (2011). Investigating the effect of different asphaltene structures on surface topography and wettability alteration. Applied Surface Science, 257, 8341–8349. doi: 10.1016/j.apsusc.2011.03.123
   Web of Science ®Google Scholar
• Asomaning, S. (1997). Heat exchanger fouling by petroleum asphaltenes. Vancouver: The University of British Columbia.
   Google Scholar
• Branthaver, J. F., Petersen, J. C., Robertson, R. E., Duvall, J. J., Kim, S. S., Harnsberger, P. M., … Schabron, J. F. (1993). SHRP-A-368, binder characterization and evaluation, volume 2: Chemistry. Washington, DC: Strategic Highway Research Program, National Research Council.
   Google Scholar
• Das, P. K., Jelagin, D., Birgisson, B., & Kringos, N. (2012). Micro-mechanical investigation of low temperature fatigue cracking behaviour of bitumen. In 7th rilem international conference on cracking in pavements, 4.
   Google Scholar
• Das, P. K., Kringos, N., Wallqvist, V., & Birgisson, B. (2013). Micromechanical investigation of phase separation in bitumen by combining atomic force microscopy with differential scanning calorimetry results. Road Materials and Pavement Design, 14, 25–37. doi: 10.1080/14680629.2013.774744
   Web of Science ®Google Scholar
• De Mores, M. B., Pereira, R. B., Simao, R. A., & Leite, L. F. M. (2010). High temperature AFM study of CAP 30/45 Pen grade bitumen. Journal of Microscopy, 239, 46–53. doi: 10.1111/j.1365-2818.2009.03354.x
   PubMed Web of Science ®Google Scholar
• Dorset, D. L., & Annis, B. K. (1996). Lamellar order and the crystallization of linear chain solid solutions. Macromolecules, 29, 2969–2973. doi: 10.1021/ma9514277
   Web of Science ®Google Scholar
• Dorset, D. L., Hanlon, J., Mcconnell, C. H., Fryer, J. R., Lotz, B., Wittmann, J. C., … Zemlin, F. (1990). Why do polyethylene crystals have sectors? Proceedings of the National Academy of Sciences of the United States of America, 87, 1690–1700.
   Web of Science ®Google Scholar
• Dourado, E. R., Simao, R. A., & Leite, L. F. M. (2012). Mechanical properties of asphalt binders evaluated by atomic force microscopy. Journal of Microscopy, 245, 119–128. doi: 10.1111/j.1365-2818.2011.03552.x
   PubMed Web of Science ®Google Scholar
• European Standard. (2000). Bitumen and bituminous binders-determination of the paraffin wax content. British Standard. BS EN 12606-1.
   Google Scholar
• Fini, E. H., Kalberer, E. W., Shahbazi, A., Basti, M., You, Z., Ozer, H., & Aurangzeb, Q. (2011). Chemical characterization of biobinder from swine manure: Sustainable modifier for asphalt binder. Journal of Materials in Civil Engineering, 23, 1506–1513. doi: 10.1061/(ASCE)MT.1943-5533.0000237
   Web of Science ®Google Scholar
• Fischer, H., Stadler, H., & Erina, N. (2013). Quantitative temperature-depending mapping of mechanical properties of bitumen at the nanoscale using the AFM operated with peakForce tappingTM mode. Journal of Microscopy, 250, 210–217. doi: 10.1111/jmi.12036
   PubMed Web of Science ®Google Scholar
• Hartman, A. M., & Gilchrist, M. D. (2004). Evaluating four-point bend fatigue of asphalt mix using image analysis. Journal of Materials in Civil Engineering, 16, 60–68. doi: 10.1061/(ASCE)0899-1561(2004)16:1(60)
   Web of Science ®Google Scholar
• Huang, S. C. (2008). Rubber concentration on rheology of aged asphalt binders. Journal of Materials in Civil Engineering, 20, 221–229. doi: 10.1061/(ASCE)0899-1561(2008)20:3(221)
   Web of Science ®Google Scholar
• Huang, S. C., Robertson, R. E., Branthaver, J. F., & Petersen, J. C. (2005). Impact of lime modification of asphalt and freeze-thaw cycling on the asphalt-aggregate interaction and moisture resistance to moisture damage. Journal of Materials in Civil Engineering, 17, 711–718. doi: 10.1061/(ASCE)0899-1561(2005)17:6(711)
   Web of Science ®Google Scholar
• Jager, A., Lackner, R., Eisenmenger-Sittner, C., & Blab, R. (2004). Identification of microstructural components of bitumen by means of atomic force microscopy (AFM). Proceedings in Applied Mathematics and Mechanics, 4, 400–401. doi: 10.1002/pamm.200410181
   Google Scholar
• Jahangir, R., Little, D., & Bhasin, A. (2015). Evolution of asphalt binder microstructure due to tensile loading determined using AFM and image analysis techniques. International Journal of Pavement Engineering, 16, 337–349. doi: 10.1080/10298436.2014.942863
   Web of Science ®Google Scholar
• Lamontagne, J., Dumas, P., Mouillet, V., & Kister, J. (2001). Comparison by Fourier transform infrared (FTIR) spectroscopy of different ageing techniques: Application to road bitumens. Fuel, 80, 483–488. doi: 10.1016/S0016-2361(00)00121-6
   Web of Science ®Google Scholar
• Loeber, L., Sutton, O., Morel, J., Valleton, J.-M., & Muller, G. (1996). New direct observations of asphalts and asphalt binders by scanning electron microscopy and atomic force microscopy. Journal of Microscopy, 182, 32–39. doi: 10.1046/j.1365-2818.1996.134416.x
   Web of Science ®Google Scholar
• Lovinger, A. J., Lotz, B., Davis, D. D., & Schumacher, M. (1994). Morphology and thermal properties of fully syndiotactic polypropylene. Macromolecules, 27, 6603–6611. doi: 10.1021/ma00100a053
   Web of Science ®Google Scholar
• Lu, X., Langton, M., Olofsson, P., & Redelius, P. (2005). Wax morphology in bitumen. Journal of Materials Science, 40, 1893–1900. doi: 10.1007/s10853-005-1208-4
   Web of Science ®Google Scholar
• Masson, J-F., Collins, P., Robertson, G., Woods, J. R., & Margeson, J. (2003). Thermodynamics, phase diagrams, and stability of bitumen-polymer blends. Energy & Fuels, 17, 714–724. doi: 10.1021/ef0202687
   Web of Science ®Google Scholar
• Masson, J. F., Leblond, V., & Margeson, J. (2006). Bitumen morphologies by phase-detection atomic force microscopy. Journal of Microscopy, 221, 17–29. doi: 10.1111/j.1365-2818.2006.01540.x
   PubMed Web of Science ®Google Scholar
• Masson, J.-F., Leblond, V., Margeson, J., & Bundalo-perc, S. (2007). Low-temperature bitumen stiffness and viscous paraffinic nano and micro-domains by cryogenic AFM and PDM. Journal of Microscopy, 227, 191–202. doi: 10.1111/j.1365-2818.2007.01796.x
   PubMed Web of Science ®Google Scholar
• Mehta, R., Keawwattana, W., Guenthner, A. L., & Kyu, T. (2004). Role of curvature elasticity in sectorization and ripple formation during melt crystallization of polymer single crystals. Physical Review E, 69, 061802-1–9. doi: 10.1103/PhysRevE.69.061802
   Google Scholar
• Nahar, S. N., Schmets, A. J. M., Scarpas, A., & Schitter, G. (2014). Microstructural changes in bitumen at the onset of crack formation. European Polymer Journal, 56, 17–25. doi: 10.1016/j.eurpolymj.2014.04.007
   Web of Science ®Google Scholar
• Pauli, A. T., Branthaver, J. F., Robertson, R. E., Grimes, W., & Eggleston, C. M. (2001). Atomic force microscopy investigation of SHRP asphalts. ACS Division of Fuel Chemistry Preprints, 46, 104–110.
   Google Scholar
• Pauli, A. T., Grimes, R. W., Beemer, A. G., Turner, T. F., & Branthaver, J. F. (2011). Morphology of asphalts, asphalt fractions and model wax-doped asphalts studied by atomic force microscopy. International Journal of Pavement Engineering, 12, 291–309. doi: 10.1080/10298436.2011.575942
   Web of Science ®Google Scholar
• Pauli, T., Grimes, W., Beiswenger, J., & Schmets, A. (2015). Surface structuring of wax in complex media. Journal of Materials in Civil Engineering, 27(8), C4014001-1. doi: 10.1061/(ASCE)MT.1943-5533.0001032
   Web of Science ®Google Scholar
• Peters, R. D., Stasiak, P., Matsen, M. W., & Palnoki-Veress, K. (2013). Morphology induced spinodal decomposition at the surface of symmetric diblock copolymer films. ACS Macro Letters, 2, 441–445. doi: 10.1021/mz400159s
   Web of Science ®Google Scholar
• Rebelo, L. M., Cavalcante, P. N., de Sousa, J. S., Filho, J. M., Soaresb, S. A., & Soares, J. B. (2014). Micromorphology and microrheology of modified bitumen by atomic force microscopy. Road Materials and Pavement Design, 15, 300–311. doi: 10.1080/14680629.2013.869885
   Web of Science ®Google Scholar
• Research Institute of Highway Ministry of Transportation. (2011). Standard test methods of bitumen and bituminous mixtures for highway engineering. Chinese Standard. JTG E20-2011.
   Google Scholar
• Sastry, M. I. S., Raman, N. S., Jain, N., Mukherjee, S., Kagdiyal, V., Singhal, S. K., & Sarpal, A. S. (2010). Determination of wax appearance temperature and wax dissolution temperature of waxy crude oils by temperature programmed IR spectroscopy. Petrotech-2010. 20100930.
   Google Scholar
• Schmets, A., Kringos, N., Pauli, T., Redelius, P., & Scarpas, T. (2010). On the existence of wax-induced phase separation in bitumen. International Journal of Pavement Engineering, 11, 555–563. doi: 10.1080/10298436.2010.488730
   Web of Science ®Google Scholar
• Soenen, H., Besamusca, J., Fischer, H. R., Poulikakos, L. D., Planche, J. P., Das, P. K.,  & Chailleux, E. (2014). Laboratory investigation of bitumen based on round robin DSC and AFM tests. Materials and Structures, 47, 1205–1220. doi: 10.1617/s11527-013-0123-4
   Web of Science ®Google Scholar
• Speight, J. G. (2014). The chemistry and technology of petroleum. Abingdon, UK: CRC Press.
   Google Scholar
• Tinsley, J. F., Jahnke, J. P., Adamson, D. H., Guo, X., Amin, D., Kriegel, R., … Prud’home, R. K. (2009). Waxy gels with asphaltenes 2: Use of wax control polymers. Energy & Fuels, 23, 2065–2074. doi: 10.1021/ef800651d
   Web of Science ®Google Scholar
• Tinsley, J. F., Jahnke, J. P., Dettman, H. D., & Prud’home, R. K. (2009). Waxy gels with asphaltenes 1: Characterization of precipitation, gelation, yield stress, and morphology. Energy & Fuels, 23, 2056–2064. doi: 10.1021/ef800636f
   Web of Science ®Google Scholar
• Usmani, A. (1997). Asphalt science and technology. Abingdon, UK: CRC Press.
   Google Scholar
• Wang, H., & Composto, R. J. (2002). Kinetics of surface and interfacial fluctuations in phase separation polymer blend film. Macromolecules, 35, 2799–2809. doi: 10.1021/ma0116699
   Web of Science ®Google Scholar
• Yang, H. (2006). Adhesion studies of polymers: (I) autohesion of ethylene/1-octene copolymers; (II) method development and adhesive characterization of pressure sensitive adhesive in paper laminates for postage stamps. Virginia: Virginia Polytechnic Institute and State University.
   Google Scholar
• Yang, X., & Peter, K. (2005). Asphaltenes and waxes do not interact synergistically and coprecipitate in solid organic deposits. Energy & Fuels, 19, 1360–1375. doi: 10.1021/ef050022c
   Web of Science ®Google Scholar
• Yu, X., Burnham, N. A., Mallick, R. B., & Tao, M. (2013). A systematic AFM-based method to measure adhesion differences between micron-sized domains in asphalt binders. Fuel, 113, 443–447. doi: 10.1016/j.fuel.2013.05.084
   Web of Science ®Google Scholar
• Yu, X., Zaumanis, M., dos Santos, S., & Poulikakos, L. D. (2014). Rheological, microscopic, and chemical characterization of the rejuvenating effect on asphalt binders. Fuel, 135, 162–171. doi: 10.1016/j.fuel.2014.06.038
   Web of Science ®Google Scholar
• Zbik, M., Horn, R. G., & Shaw, N. (2006). AFM study of paraffin wax surfaces. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 287, 139–146. doi: 10.1016/j.colsurfa.2006.03.043
   Web of Science ®Google Scholar
• Zhang, H. L., Yu, J. Y., Feng, Z. G., Xue, L. H., & Wu, S. P. (2012). Effect of aging on the morphology of bitumen of atomic force microscopy. Journal of Microscopy, 246, 11–19. doi: 10.1111/j.1365-2818.2011.03578.x
   PubMed Web of Science ®Google Scholar
• Zhao, S., Bowers, B., Huang, B., & Shu, X. (2014). Characterizing rheological properties of binder and blending efficiency of asphalt paving mixtures containing RAS through GPC. Journal of Materials in Civil Engineering, 26, 941–946. doi: 10.1061/(ASCE)MT.1943-5533.0000896
   Web of Science ®Google Scholar