A new approach to the design of rigid pavement: single-axle loading

References

• Ağar, E., Sutas, İ., & Öztaş, G. (1998). Beton Yollar (Rijit Yol Üstyapıları). İstanbul: İTÜ İnşaat Fakültesi Matbaası.
   Google Scholar
• Akman, M. S. (1990). İleri Beton Teknolojisi Ders Notları. İstanbul: Teknik Üniversitesi İnşaat Fakültesi Matbaası.
   Google Scholar
• Bayrak, O. Ü. (2007). Beton yol tasarımına yeni bir yaklaşım. PhD, Atatürk Üniversitesi, Erzurum (200794).
   Google Scholar
• Choubane, B., & Tia, M. (1995). Analysis and verification of thermal-gradient effects on concrete pavement. Journal of Transportation Engineering, 121(1), 75–81. doi: 10.1061/(ASCE)0733-947X(1995)121:1(75)
   Web of Science ®Google Scholar
• Ersoy, U. (1985). Betonarme: temel ilkeler ve taşıma gücü hesabı. İstanbul: Evrim Yayınevi.
   Google Scholar
• Fwa, T. (2003). Highway and airport pavement design. The Civil Engineering Handbook.
   Google Scholar
• Hadi, M. N., & Bodhinayake, B. (2003). Non-linear finite element analysis of flexible pavements. Advances in Engineering Software, 34(11), 657–662. doi: 10.1016/S0965-9978(03)00109-1
   Web of Science ®Google Scholar
• Hınıslıoğlu, S., & Bayrak, O. Ü. (2004). Optimization of early flexural strength of pavement concrete with silica fume and fly ash by the Taguchi method. Civil Engineering and Environmental Systems, 21(2), 79–90. doi: 10.1080/10286600410001684562
   Web of Science ®Google Scholar
• Hınıslıoğlu, S., & Bayrak, O. Ü. (2005). A robust approach for evaluating modulus of elasticity of pavement concrete. Indian Journal of Engineering & Materials Sciences, 12, 111–116.
   Web of Science ®Google Scholar
• Huang, Y. H. (1993). Pavement analysis and design. Englewood Cliffs, NJ: Pearson Prentice Hall.
   Google Scholar
• Jeong, J. H., & Zollinger, D. G. (2005). Environmental effects on the behavior of jointed plain concrete pavements. Journal of Transportation Engineering, 131(2), 140–148. doi: 10.1061/(ASCE)0733-947X(2005)131:2(140)
   Web of Science ®Google Scholar
• Kim, S. M., & Nam, J. H. (2010). Measurements and experimental analysis of temperature variations in Portland cement concrete pavement systems. Road Materials and Pavement Design, 11(3), 745–771. doi: 10.1080/14680629.2010.9690302
   Web of Science ®Google Scholar
• Kim, Y. K., & Lee, S. W. (2013). Performance evaluation of bonded concrete overlay. Construction and Building Materials, 49, 464–470. doi: 10.1016/j.conbuildmat.2013.08.066
   Web of Science ®Google Scholar
• Lee, Y. H. (1999). TKUPAV: Stress analysis and thickness design program for rigid pavements. Journal of Transportation Engineering, 125(4), 338–346. doi: 10.1061/(ASCE)0733-947X(1999)125:4(338)
   Web of Science ®Google Scholar
• Lee, Y. H., & Lee, Y. M. (1996). Corner stress analysis of jointed concrete pavements. Transportation Research Record: Journal of the Transportation Research Board, 1525, 44–56. doi: 10.3141/1525-06
   Google Scholar
• Lee, Y. H., Lee, Y. M., & Yen, S. T. (2002). Corner loading and curling stress analysis for concrete pavements – an alternative approach. Canadian Journal of Civil Engineering, 29(4), 576–588. doi: 10.1139/l02-033
   Web of Science ®Google Scholar
• Lee, Y. H., Yen, S. T., Lee, C. T., Bair, J. H., & Lee, Y. M. (1997). Development of new stress analysis and thickness design procedures for jointed concrete pavements. Paper presented at the Proceedings of the 6th International Conference of Concrete Pavements, Purdue University, West Lafayette, IN.
   Google Scholar
• Liu, W., & Fwa, T. F. (2005). Effects of joint load transfer on concrete pavement response. Journal of the Eastern Asia Society for Transportation Studies, 6, 1258–1273.
   Google Scholar
• Mackiewicz, P. (2014). Thermal stress analysis of jointed plane in concrete pavements. Applied Thermal Engineering, 73(1), 1169–1176. doi: 10.1016/j.applthermaleng.2014.09.006
   Web of Science ®Google Scholar
• Maitra, S. R., Reddy, K., & Ramachandra, L. (2013). Estimation of critical stress in jointed concrete pavement. Procedia – Social and Behavioral Sciences, 104, 208–217. doi: 10.1016/j.sbspro.2013.11.113
   Google Scholar
• Pane, I., Hansen, W., & Mohamed, A. (1998). Three-dimensional finite element study on effects of nonlinear temperature gradients in concrete pavements. Transportation Research Record: Journal of the Transportation Research Board, 1629, 58–66. doi: 10.3141/1629-08
   Google Scholar
• Pickett, G., & Ray, G. K. (1951). Influence charts for concrete pavement. ASCE, 116, 49–73.
   Google Scholar
• Peace, G. S. (1993). Taguchi methods: A hands-on approach. Reading, MA: Addison Wesley Publishing Company.
   Google Scholar
• Ranjit, R. (1990). A primer on the Taguchi method. New York: Van Nostrand Reinhold.
   Google Scholar
• Setyawan, A., Zoorob, S., & Hasan, K. (2013). Investigating and comparing traffic induced and restrained temperature stresses in a conventional rigid pavement and semi-rigid Layers. Procedia Engineering, 54, 875–884. doi: 10.1016/j.proeng.2013.03.080
   Google Scholar
• Shoukry, S., Fahmy, M., Prucz, J., & William, G. (2007). Validation of 3DFE analysis of rigid pavement dynamic response to moving traffic and nonlinear temperature gradient effects. International Journal of Geomechanics, 7(1), 16–24. doi: 10.1061/(ASCE)1532-3641(2007)7:1(16)
   Google Scholar
• Shoukry, S. N., William, G., & Riad, M. (2003). Nonlinear temperature gradient effects in dowel jointed concrete slabs. International Journal of Pavement Engineering, 4(3), 131–142. doi: 10.1080/10298430310001632629
   Google Scholar
• Siddique, Z. Q., Hossain, M., & Meggers, D. (2005). Temperature and curling measurements on concrete pavement. Paper presented at the Proceedings of the 2005 Mid-Continent Transportation Research Symposium, Ames, IA.
   Google Scholar
• Taguchi, G. (1962). Tables of orthogonal arrays and linear graphs. Tokyo: Maruzen.
   Google Scholar
• Tang, T., Zollinger, D. G., & Senadheera, S. (1993). Analysis of concave curling in concrete slabs. Journal of Transportation Engineering, 119(4), 618–633. doi: 10.1061/(ASCE)0733-947X(1993)119:4(618)
   Web of Science ®Google Scholar
• TS 500. (1984). Betonarme Yapıların Hesap ve Yapım Kuralları. Ankara: Türk Standartlar Enstitüsü.
   Google Scholar
• Tunç, A. (2001). Yol malzemeleri ve uygulamaları. İstanbul: Atlas Yayıncılık.
   Google Scholar
• Ventsel, E., & Krauthammer, T. (2001). Thin plates and shells: Theory, analysis, and applications. New York: Marcel Dekker, Inc.
   Google Scholar
• Wu, C. P., & Shen, P.-A. (1996). Dynamic analysis of concrete pavements subjected to moving loads. Journal of Transportation Engineering, 122(5), 367–373. doi: 10.1061/(ASCE)0733-947X(1996)122:5(367)
   Web of Science ®Google Scholar