References
- AASHTO. (1993). Standard method of test for estimating fatigue resistance of asphalt binders using the linear amplitude sweep (TP10). Washington, DC: Author.
- AASHTO. (2012). Standard method of test for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR) (T313). Washington, DC: Author.
- AASHTO. (2012). Standard method of test for determining the fracture properties of asphalt binder in direct tension (DT) (T314). Washington, DC: Author.
- AASHTO. (2012). Standard method of test for determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR) (T315). Washington, DC: Author.
- AASHTO. (2012). Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV) (R028). Washington, DC: Author.
- AASHTO. (2012). Standard test method for thermal stress restrained specimen tensile strength (TP101). Washington, DC: Author.
- AASHTO. (2013). Standard method of test for effect of heat and air on a moving film of asphalt binder (rolling thin-film oven test) (T240). Washington, DC: Author.
- AASHTO. (2014). Standard method of test for multiple stress creep recovery (MSCR) test of asphalt binder using a dynamic shear rheometer (DSR) (T350). Washington, DC: Author.
- AASHTO. (2014). Standard method of test for penetration of bituminous materials (T49). Washington, DC: Author.
- AASHTO. (2014). Standard specification for performance-graded asphalt binder using multiple stress creep recovery (MSCR) test (M322). Washington, DC: Author.
- AASHTO. (2016). Standard method of test for performance graded asphalt binder (M320). Washington, DC: Author.
- Anderson, D. A., & Kennedy, T. W. (1993). Development of SHRP binder specification. Journal of the Association of Asphalt Paving Technologists, 62, 481–507.
- Arnold, J. C. (1995). The influence of liquid uptake on environmental stress cracking of glassy polymers. Materials Science and Engineering A, 197(1), 119–124. doi: 10.1016/0921-5093(94)09759-3
- ASTM. (2010). Standard test method for multiple stress creep and recovery (MSCR) of asphalt binder using a dynamic shear rheometer (D7405-10a). Washington, DC: Author.
- Bahia, H. U., & Anderson, D. A. (1993). Glass transition behavior and physical hardening of asphalt binders. Journal of the Association of Asphalt Paving Technologists, 62, 93–129.
- Bubeck, R. A. (1981). Kinetics of environmental stress cracking in high density polyethylene. Polymer, 22(5), 682–686. doi: 10.1016/0032-3861(81)90361-X
- Cannone Falchetto, A., Marasteanu, M. O., Balmurugan, S., & Negulescu, I. I. (2014). Investigation of asphalt mixture strength at low temperatures with the bending beam rheometer. Road Materials and Pavement Design, 15(Suppl. 1), 28–44. doi: 10.1080/14680629.2014.926618
- Cannone Falchetto, A., Marasteanu, M. O., & Di Benedetto, H. (2011). Analogical based approach to forward and inverse problems for asphalt materials characterization at low temperatures. Journal of the Association of Asphalt Paving Technologists, 80, 549–581.
- Cannone Falchetto, A., Montepara, A., Tebaldi, G., & Marasteanu, M. O. (2012). Microstructural and rheological investigation of asphalt mixtures containing recycled asphalt materials. Construction and Building Materials, 35, 321–329. doi: 10.1016/j.conbuildmat.2012.04.016
- Cannone Falchetto, A., & Moon, K. H. (2015). Micromechanical-analogical modelling of asphalt binder and asphalt mixture creep stiffness properties at low temperature. Road Materials and Pavement Design, 16(Suppl. 1), 111–137. doi: 10.1080/14680629.2015.1029708
- Cannone Falchetto, A., Turos, M. I., & Marasteanu, M. O. (2012). Investigation on asphalt binder strength at low temperatures. Road Materials and Pavement Design, 13(4), 804–816. doi: 10.1080/14680629.2012.735793
- Carret, J. C., Cannone Falchetto, A., Marasteanu, M. O., Di Benedetto, H., Wistuba, M. P., & Sauzeat, C. (2015). Comparison of rheological parameters of asphalt binders obtained from bending beam rheometer and dynamic shear rheometer at low temperatures. Road Materials and Pavement Design, 16(Suppl. 1), 211–227. doi: 10.1080/14680629.2015.1029696
- Christensen, R. M. (1982). Theory of viscoelasticity: An Introduction. New York, NY: Academic Press.
- Cook, R. D., & Weisberg, S. (2009). Applied regression including computing and graphics (Vol. 488). Minneapolis, MN: Wiley Series in Probability and Statistics.
- D’Angelo, J., Kluttz, R., Dongre, R. N., Stephens, K., & Zanzotto, L. (2007). Revision of the superpave high temperature binder specification: The multiple stress creep recovery test. Journal of the Association of Asphalt Paving Technologists, 76, 123–162.
- Di Benedetto, H., Olard, F., Sauzéat, C., & Delaporte, B. (2004). Linear viscoelastic behaviour of bituminous materials: From binders to mixes. Road Materials and Pavement Design, 5(Suppl. 1), 163–202. doi: 10.1080/14680629.2004.9689992
- EN 12697-46. (2012). Bituminous mixtures – test methods for hot mix asphalt – part 46: Low temperature cracking and properties by uniaxial tension tests. Brussel: European Committee for Standardization.
- Farrar, M., Sui, C., Salmans, S., & Qin, Q. (2015). Determining the low-temperature rheological properties of asphalt binder using a dynamic shear rheometer (DSR) (Report FP 08). Laramie, WY: Western Research Institute.
- FGSV – TL Asphalt-StB. (2013). Technische Lieferbedingungen für Asphaltmischgut für den Bau von Verkehersflächenbesfestigungen, Forschungsgesellschaft für Straßen- und Verkehrswesen [In German].
- Hintz, C., & Bahia, H. (2013). Simplification of linear amplitude sweep test and specification parameter. Transportation Research Record: Journal of the Transportation Research Board, 2370, 10–16. doi: 10.3141/2370-02
- Hintz, C., Velasquez, R., Johnson, C., & Bahia, H. (2011). Modification and validation of linear amplitude sweep test for binder fatigue specification. Transportation Research Record: Journal of the Transportation Research Board, 2207, 99–106. doi: 10.3141/2207-13
- Huang, W., & Tang, N. (2015). Characterizing SBS modified asphalt with sulfur using multiple stress creep recovery test. Construction and Building Materials, 93, 514–521. doi: 10.1016/j.conbuildmat.2015.06.041
- Huet, C. (1963). Etude par une méthode d’impédance du comportement viscoélastique des matériaux hydrocarbonés (Thèse de doctorat d’ingénieur). Faculté des Sciences de l’Université de Paris, Paris. p. 69 [In French].
- Johnson, C. (2010). Estimating asphalt binder fatigue resistance using an accelerated test method (PhD thesis). University of Wisconsin-Madison, Madison.
- Kim, S. S. (2007). Development of an asphalt binder cracking device (IDEA Program 99). Washington, DC: Transportation Research Board of the National Research Council.
- Mangiafico, S., Di Benedetto, H., Sauzéat, C., Olard, F., Pouget, S., & Planque, L. (2013). Influence of reclaimed asphalt pavement content on complex modulus of asphalt binder blends and corresponding mixes: Experimental results and modelling. Road Materials and Pavement Design, 14(Suppl. 1), 132–148. doi: 10.1080/14680629.2013.774751
- Marasteanu, M. O., Cannone Falchetto, A., Turos, M., & Le, J.-L. (2012). Development of a simple test to determine the low temperature strength of asphalt mixtures and binders (IDEA Program Final Report NCHRP 151). Washington, DC: Transportation Research Board of the National Research Council.
- McDaniel, R. S., Soleymani, H., Anderson, R. M., Turner, P., & Peterson, R. (2000). Recommended Use of declaimed asphalt pavement in the super-pave mix design method: Technician’s manual (NCHRP Report 452). Washington, DC: Transportation Research Board of the National Research Council.
- Moskala, E. J. (1998). A fracture mechanics approach to environmental stress cracking in poly (ethyleneterephthalate). Polymer, 39(3), 675–680. doi: 10.1016/S0032-3861(97)00312-1
- Olard, F., & Di Benedetto, H. (2003). General ‘2S2P1D’ model and relation between the linear viscoelastic behaviours of bituminous binders and mixes. Road Materials and Pavement Design, 4(2), 185–224. doi: 10.1080/14680629.2003.9689946
- Renken, P., & Wistuba, M. P. (2012). Untersuchung der Dauerhaftigkeit unterschiedlicher Asphaltbinderkonzepte (BmVBS Forschungsprojekt Nr. FE 07.0266/2012/FRB). [In German].
- Riccardi, C., Cannone Falchetto, A., Losa, M., & Wistuba, M. P. (2016a). Development of simple relationship between asphalt binder and mastic based on rheological tests. Road Materials and Pavement Design, 1–18. doi: 10.1080/14680629.2016.1230514
- Riccardi, C., Cannone Falchetto, A., Losa, M., & Wistuba, M. P. (2016b). Rheological modeling of asphalt binder and asphalt mortar containing recycled asphalt material. Materials and Structures, 49(10), 4167–4183. doi: 10.1617/s11527-015-0779-z
- Schrader, J. (2015). Entwicklung eines Verfahrens zur Bewertung von Straßenbitumen hinsichtlich Ermüdungswiderstand, Studienarbeit. TU Braunschweig [In German].
- Soenen, H., Blomberg, T., Pellinen, T., & Laukkanen, O. V. (2013). The multiple stress creep-recovery test: A detailed analysis of repeatability and reproducibility. Road Materials and Pavement Design, 14(Suppl. 1), 2–11. doi: 10.1080/14680629.2013.774742
- Sui, C., Farrar, M., Harnsberger, P., Tuminello, W., & Turner, T. (2011). New low-temperature performance-grading method: Using 4-mm parallel plates on a dynamic shear rheometer. Transportation Research Record: Journal of the Transportation Research Board, 2207, 43–48. doi: 10.3141/2207-06
- Williams, M. L., Landel, R. F., & Ferry, J. D. (1955). The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids. Journal of the American Chemical Society, 77(14), 3701–3707. doi: 10.1021/ja01619a008
- Zoorob, S. E., Castro-Gomes, J. P., Oliveira, L. P., & O’connell, J. (2012). Investigating the multiple stress creep recovery bitumen characterisation test. Construction and Building Materials, 30, 734–745. doi: 10.1016/j.conbuildmat.2011.12.060