Application of laboratory asphalt cracking tests to cold in-place recycled mixtures

References

• AASHTO T322-07. (2007). Standard method of test for determining the creep compliance and strength of hot mix asphalt (HMA) using the indirect tensile test device. American Association of State Highway and Transportation Officials.
   Google Scholar
• AASHTO TP 105-13. (2015). Standard method of test for determining the fracture energy of asphalt mixtures using the semi-circular bend geometry (SCB). American Association of State Highway and Transportation Officials.
   Google Scholar
• Anderson, D. A., Lapalu, L., Marasteanu, M. O., Le Hir, Y. M., Planche, J. P., & Martin, D. (2001). Low-temperature thermal cracking of asphalt binders as ranked by strength and fracture properties. Transportation Research Record: Journal of the Transportation Research Board, 1766, 1–6. doi: 10.3141/1766-01
   Google Scholar
• ASTM D1559. Test method for resistance of plastic flow of bituminous mixtures using Marshall apparatus. American Society for Testing and Materials.
   Google Scholar
• ASTM D6927-15. (2015). Standard test method for Marshall stability and flow of asphalt mixtures. American Society for Testing and Materials.
   Google Scholar
• ASTM D7313-07. (2007). Standard test method for determining fracture energy of asphalt-aggregate mixtures using the disk-shaped compact tension geometry. American Society for Testing and Materials.
   Google Scholar
• Batista, F. (2004). Innovative pavement rehabilitation techniques: Dense asphalt mixtures (PhD dissertation). Prepared under the cooperation between LNEC and FEUP.
   Google Scholar
• COREPASOL. (2014). Report on available test and mix design procedures for cold-recycled bitumen stabilised materials. Characterization of Advanced Cold-Recycled Bitumen Stabilized Pavement Solutions (COREPASOL).
   Google Scholar
• Cross, S. A., Thomas, T., Matthews, D., & Gallivan, V. L. (2015). FHWA-HIF-14-001 basic asphalt recycling manual. Federal Highway Administration (FHWA).
   Google Scholar
• Dave, E., Braham, A., Buttlar, W., Paulino, G., & Zofka, A. (2008). Integration of laboratory testing, field performance data, and numerical simulations for the study of low-temperature cracking. Proceedings of the sixth RILEM international conference on cracking in pavements (Vol. 1, pp. 369–378).
   Google Scholar
• Dave, E., Leon, S., & Park, K. (2011). Thermal cracking prediction model and software for asphalt pavements. Integrated Transportation and Development for a Better Tomorrow (ASCE), 667–676.
   Google Scholar
• ISSA TB-100. (2005). Test method for wet track abrasion of slurry surfaces (revised), 4th revision. International Slurry Surfacing Association.
   Google Scholar
• Jahren, C., Yu, J. J., & Williams, C. (2016). Alternate design methods to renew lightly traveled paved roads. Minnesota Department of Transportation (MnDOT).
   Google Scholar
• Marasteanu, M., Buttlar, W., Bahia, H., Williams, C., Moon, K. H., Teshale, E. Z., … Ahmed, S. (2012). Investigation of low temperature cracking in asphalt pavements National Pooled Fund Study Phase II. Minnesota Department of Transportation.
   Google Scholar
• Marasteanu, M., Zofka, A., Turos, M., Li, X., Velasquez, R., Li, X., & Ojo, J. (2007). Investigation of low temperature cracking in asphalt pavements (National Pooled Fund Study 776). Minnesota Department of Transportation.
   Google Scholar
• MnDOT Geotechnical Section. (2015). Grading & base manual. Minnesota Department of Transportation.
   Google Scholar
• Serfass, J. P., Poirier, J. E., Henrat, J. P., & Carbonneau, X. (2004). Influence of curing on cold mix mechanical performance. Materials and Structures, 37, 365–368. doi: 10.1617/14130
   Web of Science ®Google Scholar
• Zegeye, E., Le, J. L., Turos, M., & Marasteanu, M. (2012). Investigation of size effect in asphalt mixture fracture testing at low temperature. Journal of Road Materials and Pavement Design, 13, 88–101.
   Google Scholar
• Zhou, F., Im, S., Hu, S., Newcomb, D., & Scullion, T. (2017). Selection and preliminary evaluation of laboratory cracking tests for routine asphalt mix designs. Journal of Road Materials and Pavement Design, 18, 62–86. doi: 10.1080/14680629.2016.1266741
   Web of Science ®Google Scholar