Experimental application of waste glass powder filler in recycled dense-graded asphalt mixtures

References

• Airey, G. D. (1997). Rheological characteristics of polymer modified and aged bitumens (Ph.D. Thesis). Department of Civil Engineering, University of Nottingham, UK.
   Google Scholar
• Al-Hdabi, A. (2016). Laboratory investigation on the properties of asphalt concrete mixture with rice husk ash as filler. Construction and Building Materials. doi: 10.1016/j.conbuildmat.2016.09.070
   Google Scholar
• Anderson, D. A., Le Hir, Y. M., Marasteanu, M. O., Planche, J. P., Martin, D., & Gauthier, G. (2001). Evaluation of fatigue criteria for asphalt binders (pp. 48–55). Transportation Research Record 1766. Washington, DC: Transportation Research Board. doi: 10.3141/1766-07
   Google Scholar
• Arabani, M., Tahami, S. A., & Taghipoor, M. (2016). Laboratory investigation of hot mix asphalt containing waste materials. Road Materials and Pavement Design. doi: 10.1080/14680629.2016.1189349
   Web of Science ®Google Scholar
• D'Angelo, J., Kluttz, R., Dongré, R., Stephens, K., & Zanzotto, L. (2007). Revision of the superpave high temperature binder specification: The multiple stress creep recovery test. Asphalt Paving Technology, 76(123), 123–162.
   Google Scholar
• Dondi, G., Mazzotta, F., Sangiorgi, C., Pettinari, M., Simone, A., Vignali, V., & Tataranni, P. (2014). Influence of cement and limestone filler on the rheological properties of mastic in cold bituminous recycled mixtures. In Proceeding of 3rd international conference on transportation infrastructures – ICTI 2014, April 22–25, Pisa, Italy.
   Google Scholar
• Dondi, G., Mazzotta, F., Simone, A., Vignali, V., Sangiorgi, C., & Lantieri, C. (2016). Evaluation of different short term aging procedures with neat, warm and modified binders. Construction and Building Materials. doi: 10.1016/j.conbuildmat.2015.12.122
   Web of Science ®Google Scholar
• Flynn, L. (1993). Glasphalt utilization dependent on availability. Road and Bridge, 31(2), 59–61.
   Google Scholar
• Ghasemi, M., & Marandi, S. M. (2013). Laboratory studies of the effect of recycled glass powder additive on the properties of polymer modified asphalt binders. International Journal of Engineering. doi: 10.5829/idosi.ije.2013.26.10a.08
   Google Scholar
• Jony, H. H., Al-Rubaie, M. F., & Jahad, I. Y. (2011). The effect of using glass powder filler on Hot asphalt concrete mixtures properties. Engineering & Technologies Journal, 29(1), 44–57.
   Google Scholar
• Kandhal, P. S. (1996). Waste materials in hot mix asphalt – An overview. NCAT Report 92-06.
   Google Scholar
• Khosla, N., & Harikrishnan, K. I. (2007). Tensile strength – A design and evaluation tool for Superpave mixtures. FHWA/NC/2006-24 Final report.
   Google Scholar
• Kim, Y. R., Allen, D. H., & Little, D. N. (2007). Computational constitutive model for predicting nonlinear viscoelastic damage and fracture failure of asphalt concrete mixtures. International Journal of Geomechanics, 7(2), 102–110. doi: 10.1061/(ASCE)1532-3641(2007)7:2(102)
   Google Scholar
• Lamperti, R., Grenfell, J., Sangiorgi, C., Lantieri, C., & Airey, G. D. (2016). Influence of waxes on adhesion properties of bituminous binders. Construction and Building Materials. doi: 10.1016/j.conbuildmat.2014.11.058
   Web of Science ®Google Scholar
• Mazzotta, F., Lantieri, C., Vignali, V., Simone, A., Dondi, G., & Sangiorgi, C. (2017). Performance evaluation of recycled rubber waterproofing bituminous membranes for concrete bridge decks and other surfaces. Construction and Building Materials. doi: 10.1016/j.conbuildmat.2017.01.058
   PubMedGoogle Scholar
• Mazzotta, F., Sangiorgi, C., Vignali, V., Lantieri, C., & Dondi, G. (2015). Rheological characterization of bituminous mastics containing waste bleaching clays. RILEM Bookseries. doi: 10.1007/978-94-017-7342-3_48
   Google Scholar
• Moreno, N. F., & Rubio, G. M. C. (2012). Influence of crumb rubber on the indirect tensile strength and stiffness modulus of hot bituminous mixes. Journal of Materials in Civil Engineering. doi: 10.1061/(ASCE)MT.1943-5533.0000436
   Web of Science ®Google Scholar
• Nassar, A. I., Khashaa Mohammed, M., Thom, N., & Parry, T. (2016). Characterization of high-performance cold bitumen emulsion mixtures for surface courses. International Journal of Pavement Engineering. doi: 10.1080/10298436.2016.1176165
   Web of Science ®Google Scholar
• Nunn M. E., & Smith, T. M. (1996). The indirect tensile stiffness modulus test: Assessment of suitability of an asphalt performance test. TRL Proj. Rep. CE/140/96, UK.
   Google Scholar
• Saffar, N. A. L. (2013). The effect of filler type and content on hot asphalt concrete mixtures properties. Al-Rafidain Engineering, 21(6), 88–100.
   Google Scholar
• Sangiorgi, C., Eskandarsefat, S., Tataranni, P., Simone, A., Vignali, V., Lantieri, C., & Dondi, G. (2016a). A complete laboratory assessment of crumb rubber porous asphalt. Construction and Building Materials. doi: 10.1016/j.conbuildmat.2016.12.016
   Web of Science ®Google Scholar
• Sangiorgi, C., Tataranni, P., Mazzotta, F., Simone, A., Vignali, V., & Lantieri, C. (2017). Alternative fillers for the production of bituminous mixtures: A screening investigation on waste powders. MDPI Coatings, 7(6), 76. doi: 10.3390/coatings7060076
   Web of Science ®Google Scholar
• Sangiorgi, C., Tataranni, P., Simone, A., Vignali, V., Lantieri, C., & Dondi, G. (2016b). Assessment of waste bleaching clay as alternative filler for the production of porous asphalts. Construction and Building Materials. doi: 10.1016/j.conbuildmat.2016.01.052
   Web of Science ®Google Scholar
• Tang, B., Wu, H., Liao, Y., & Huang, D. (2015). Effect of glass powder instead of mineral powder on asphalt mixture. 5th international conference on civil engineering and transportation, ICCET.
   Google Scholar
• Udaya, B. V., & Venkateswara, R. J. (2016). Influence of glass powder and quartzite rock dust as fillers in stone mastic asphalt. International Journal of Engineering Research & Technology (IJERT). doi: 10.17577/IJERTV5IS110118
   Google Scholar
• Vignali, V., Mazzotta, F., Sangiorgi, C., Simone, A., Lantieri, C., & Dondi, G. (2016). Incorporation of rubber powder as filler in a new dry-hybrid technology: Rheological and 3D DEM mastic performances evaluation. Materials. doi: 10.3390/ma9100842
   PubMed Web of Science ®Google Scholar
• Wu, S., Yang, W., & Xue, Y. (2007). Preparation and properties of glass-asphalt concrete. Wuham University of Technology: Key Laboratory for Silicate Materials Science and Engineering of Ministry of Education.
   Google Scholar