Simulating plant produced material in the laboratory to replicate rheological and fatigue properties

References

• American Association of State Highway Transportation Officials, AASHTO PP2. (1990). Standard practice for mixture conditioning of hot mix asphalt. Washington, DC: Author.
   Google Scholar
• American Association of State Highway and Transportation Officials, AASHTO TP 79. (2015). Standard method of test for determining the dynamic modulus and flow number for hot-mix asphalt (HMA) using the asphalt mixture performance tester (AMPT). Washington, DC: Author.
   Google Scholar
• American Association of State Highway Transportation Officials, AASHTO TP 107. (2016). Determining the damage characteristic curve of asphalt concrete from direct tension cyclic fatigue tests. Washington, DC: Author.
   Google Scholar
• Bell, C. A., Wieder, A. J., & Fellin, M. J. (1994). Laboratory aging of asphalt-aggregate mixtures: field validation. SHRP-A-390, Strategic Highway Research Program, National Research Council, Washington, DC.
   Google Scholar
• BS DD ABF. (2003). Method for the determination of the fatigue characteristics of bituminous mixtures using indirect tensile fatigue. London: European Standards.
   Google Scholar
• BS EN 12697-26. (2012). Bituminous mixtures — Test methods for hot mix asphalt — Part 26: Stiffness. London: European Standards.
   Google Scholar
• BS EN 12697-28. (2001). Bituminous mixtures — Test methods for hot mix asphalt — Part 28: Preparation of samples for determining binder content, water content and grading. London: European Standards.
   Google Scholar
• BS EN 12697-4. (2005). Bituminous mixtures — Test methods for hot mix asphalt — Part 4: Asphalt recovery: Fractionating column. London: European Standards.
   Google Scholar
• BS EN 13108-1. (2012). Bituminous mixtures – Material specifications – Part 1: Asphalt concrete. London: European Standards.
   Google Scholar
• BS EN 1426. (2007). Asphalt and bituminous binders — Determination of needle penetration. London: European Standards.
   Google Scholar
• BS EN 1427. (2007). Asphalt and bituminous binders — Determination of the softening point. London: European Standards.
   Google Scholar
• Farrar, M. J., Grimes, R. W., Sui, C., Planche, J. P., Huang, S. C., Turner, T. F., & Glaser, R. (2012, June). Thin film oxidative aging and low temperature performance grading using small plate dynamic shear rheometry: an alternative to standard rtfo, pav, and bbr. In Eurasphalt and Eurobitume Congress, Istanbul, Turkey.
   Google Scholar
• Gershkoff, D. (1991). A study of the rheological behaviour of some surface dressing binders (MSc Dissertation). University of Nottingham.
   Google Scholar
• Jacques, C., Daniel, J. S., Bennert, T., Reinke, G., Norouzi, A., Erickson, C., … Kim, Y. R. (2016). Effect of silo storage time on the characteristics of virgin and RAP asphalt mixtures. Transportation Research Record: Journal of the Transportation Research Board, 2573, 76–85. doi: 10.3141/2573-10
   Google Scholar
• Johnson, E., Johnson, G., Dai, S., Linell, D., McGraw, J., & Watson, M. (2010). Incorporation of recycled asphalt shingles in Hot mixed asphalt pavement mixtures. Final Report for Minnesota Department of Transportation.
   Google Scholar
• Mogawer, W., Bennert, T., Daniel, J. S., Bonaquist, R., Austerman, A., & Booshehrian, A. (2012). Performance characterisitcs of plant produced high RAP mixtures. International Journal of Road Materials and Pavement Design, 13(Sup. 1), 183–208. doi: 10.1080/14680629.2012.657070
   Google Scholar
• Monismith, C. L., Hicks, R. G., & Finn, F. N. (1994). Accelerated performance-related tests for asphalt-aggregate mixes and their use in mix design and analysis systems, Washington, DC: SHRP-A-417, Strategic Highway Research Program, National Research Council.
   Google Scholar
• Rahbar-Rastegar, R., & Daniel, J. S. (2016). Mixture and production parameters affecting cracking performance of mixtures with RAP and RAS. Proceedings of 8th RILEM international conference on mechanisms of cracking and debonding in pavements.
   Google Scholar
• Vallerga, B. A. (1981). Pavement deficiencies related to asphalt durability. Proc., Assn. of Asphalt Paving Technologists, 50, 481–491.
   Google Scholar
• Von Quintas, H., Scherocman, J., Kennedy, T. W., & Hughes, C. S. (1988). Asphalt aggregate mixture analysis system. Final Report to NCHRP.
   Google Scholar
• Xiao, F., Putman, B., & Amirkhanian, S. (2014). Plant and laboratory compaction effects on performance properties of plant-foamed asphalt mixture containing RAP. Journal of Materials in Civil Engineering, ASCE, 27 (9), 04014240. doi: 10.1061/(ASCE)MT.1943-5533.0001202
   Web of Science ®Google Scholar