Development and validation of an enhanced test setup for assessing HMA stripping potential under hydrodynamic pressure

References

• Al-Qadi, I. L., Fini, E. H., & Dessouky, S. H. (2006). Adhesion of hot-poured crack sealants to aggregates. Presented at 85th Annual Meeting of the Transportation Research Board.
   Google Scholar
• American Association of State Highway Transportation Officials. (2003). Standard method of test for resistance of compacted asphalt mixtures to moisture-induced damage, AASHTO T 283. Washington, DC.
   Google Scholar
• American Association of State Highway Transportation Officials. (2004). Standard method of test for Hamburg wheel-track testing of compacted hot mix asphalt (HMA), AASHTO T 324. Washington, DC.
   Google Scholar
• American Association of State Highway Transportation Officials. (2012). Standard specification for Superpave volumetric mix design, AASHTO M 323. Washington, DC.
   Google Scholar
• Arambula, E., Masad, E., & Martin, A. E. (2007). Influence of air void distribution on the moisture susceptibility of asphalt mixes. Journal of Materials in Civil Engineering, 19(8), 655–664. doi: 10.1061/(ASCE)0899-1561(2007)19:8(655)
   Web of Science ®Google Scholar
• Aschenbrener, T., & Currier, A. G. (1993). Influence of testing variables on the results from the Hamburg wheel-tracking device ( Report no. CDOT-DTD-R-93-22). Denver, CO: Colorado Department of Transportation.
   Google Scholar
• ASTM International. (1999). Standard test method for ductility of bituminous materials, ASTM D113-07. West Conshohocken, PA.
   Google Scholar
• ASTM International. (2013). Standard test method for penetration of bituminous materials, ASTM D5-13. West Conshohocken, PA.
   Google Scholar
• ASTM International. (2014). Standard test method for softening point of bitumen (ring-and-ball apparatus), ASTM D36-06. West Conshohocken, PA.
   Google Scholar
• Bagampadde, U., Isacsson, U., & Kiggundu, B. M. (2004). Classical and contemporary aspects of stripping in bituminous mixes. Road Materials and Pavement Design, 5(1), 7–43. doi: 10.1080/14680629.2004.9689961
   Google Scholar
• Bai, T., Song, Z. G., Wu, Y. G., Hu, X. D., & Bai, H. (2018). Influence of steel slag on the mechanical properties and curing time of metakaolin geopolymer. Ceramics International, 44, 15706–15713. doi: 10.1016/j.ceramint.2018.05.243
   Google Scholar
• Buss, A., Williams, R. C., & Schram, S. (2016). Evaluation of moisture susceptibility tests for warm mix asphalts. Construction and Building Materials, 102, 358–366. doi: 10.1016/j.conbuildmat.2015.11.010
   Web of Science ®Google Scholar
• Caro, S., Masad, E., Bhasin, A., & Little, D. N. (2008a). Moisture susceptibility of asphalt mixtures, Part 1: Mechanisms. International Journal of Pavement Engineering, 9(2), 81–98. doi: 10.1080/10298430701792128
   Google Scholar
• Caro, S., Masad, E., Bhasin, A., & Little, D. N. (2008b). Moisture susceptibility of asphalt mixtures, Part 2: Characterisation and modelling. International Journal of Pavement Engineering, 9(2), 99–114. doi: 10.1080/10298430701792144
   Google Scholar
• Chaturabong, P., & Bahia, H. U. (2017). The evaluation of relative effect of moisture in Hamburg wheel tracking test. Construction and Building Materials, 153, 337–345. doi: 10.1016/j.conbuildmat.2017.07.133
   Web of Science ®Google Scholar
• Chen, J., Li, J. H., Wang, H., Huang, W., & Xie, P. Y. (2019b). Preparation and effectiveness of composite phase change material for performance improvement of open graded friction course. Journal of Cleaner Production, 214, 259–269. doi: 10.1016/j.jclepro.2019.01.001
   Web of Science ®Google Scholar
• Chen, J., Yin, X. J., Wang, H., Ma, X., Ding, Y. M, & Liao, G. Y. (2019a). Directional distribution of three-dimensional connected voids in porous asphalt mixture and flow simulation of permeability anisotropy. International Journal of Pavement Engineering, 21, 245–259.
   Web of Science ®Google Scholar
• Choi, Y. (2007). Case study and test method review on moisture damage (Report no. AP-T76/07). Retrieved from http://worldcat.org/isbn/9781921329029
   Google Scholar
• Collop, A., Choi, Y., & Airey, G. (2007). Effects of pressure and aging in SATS test. Journal of Transportation Engineering, 133(11), 618–624. doi: 10.1061/(ASCE)0733-947X(2007)133:11(618)
   Web of Science ®Google Scholar
• Cui, X. Z., Cao, W. D., Liu, S. T., & Dong, L. L. (2009). On dynamic pore pressure in moisture damage of asphalt pavement. In Geo-Hunan international conference: Challenges and recent advances in pavement technologies and transportation geotechnical (pp. 121–125). Changsha: Geotechnical special publication.
   Google Scholar
• Ding, X. H., Ma, T., & Huang, X. M. (2019). Discrete-element contour-filling modeling method for micro- and macro- mechanical analysis of aggregate skeleton of asphalt mixture. Journal of Transportation Engineering, Part B: Pavements, 145, 04018056. doi: 10.1061/JPEODX.0000083
   Web of Science ®Google Scholar
• Faramarzi, M., Lee, K. W., Kim, Y., & Kwon, S. (2018). A case study on a cement treated RAP containing asphalt emulsion and acryl polymer. Case Studies in Construction Materials, 9, 201–211. doi: 10.1016/j.cscm.2018.e00211
   Google Scholar
• Field, F., & Phang, W. A. (1967). Stripping in asphaltic concrete mixes: Observations and test procedures. Canadian Technical Asphalt Association Proceeding, 12, 61–68.
   Google Scholar
• Ghauch, Z. G., Ozer, H., & Al-Qadi, I. L. (2015). Micromechanical finite element modeling of moisture damage in bituminous composite materials. Construction and Building Materials, 80, 9–17. doi: 10.1016/j.conbuildmat.2014.12.118
   Web of Science ®Google Scholar
• Gu, F., Ma, W. Y., West, R. C., Taylor, A. J., & Zhang, Y. Q. (2019). Structural performance and sustainability assessment of cold central-plant and in-place recycled asphalt pavements: A case study. Journal of Cleaner Production, 208, 1513–1523. doi: 10.1016/j.jclepro.2018.10.222
   Web of Science ®Google Scholar
• Haghshenas, H. F., Khodaii, A., & Saleh, M. (2015). Long term effectiveness of anti-stripping agents. Construction and Building Materials, 76, 307–312. doi: 10.1016/j.conbuildmat.2014.11.060
   Web of Science ®Google Scholar
• Hammons, M., Quintus, H. V., Geary, G., Wu, P., & Jared, D. (2006). Detection of stripping in hot-mix asphalt. Transportation Research Record: Journal of the Transportation Research Board, 1949, 20–31. doi: 10.1177/0361198106194900103
   Google Scholar
• Hasan, M. R. M., You, Z. P., Porter, D., & Goh, S. W. (2015). Laboratory moisture susceptibility evaluation of WMA under possible field conditions. Construction and Building Materials, 101, 57–64. doi: 10.1016/j.conbuildmat.2015.10.004
   Web of Science ®Google Scholar
• Howson, J., Bhasin, A., Masad, E., Lytton, R., & Little, D. (2009). Development of a database for surface energy of aggregates and asphalt binder (Report no. FHWA/TX-5-4524-01-1). Retrieved from http://tti.tamu.edu/documents/5-4524-01-1.pdf
   Google Scholar
• Hu, X. D., Jiang, X., & Pan, P. (2017). Effect of sample setting time on experimental evaluation of hot mix asphalt. Construction and Building Materials, 152, 375–385. doi: 10.1016/j.conbuildmat.2017.07.012
   Web of Science ®Google Scholar
• Hu, X. D., Wang, N., Pan, P., & Bai, T. (2017). Performance evaluation of asphalt mixture using brake pad waste as mineral filler. Construction and Building Materials, 138, 410–417. doi: 10.1016/j.conbuildmat.2017.02.031
   Web of Science ®Google Scholar
• Kakar, M. R., Hamzah, M. O., & Valentin, J. (2015). A review on moisture damages of hot and warm mix asphalt and related investigations. Journal of Cleaner Production, 99, 39–58. doi: 10.1016/j.jclepro.2015.03.028
   Web of Science ®Google Scholar
• Kiggundu, B. M., & Roberts, F. L. (1988). Stripping in HMA mixtures: State-of-the-art and critical review of test methods ( Report no. 88-2). Auburn, AL: National Center for Asphalt Technology.
   Google Scholar
• Kok, B. V., & Yilmaz, M. (2009). The effects of using lime and styrene-butadiene-styrene on moisture sensitivity resistance of hot mix asphalt. Construction and Building Materials, 23(5), 1999–2006. doi: 10.1016/j.conbuildmat.2008.08.019
   Web of Science ®Google Scholar
• Lei, Y., Hu, X. D., Wang, H. N., You, Z. P., Zhou, Y. L., & Yang, X. (2016). Effects of vehicle speeds on the hydrodynamic pressure of pavement surface: Measurement with a designed device. Measurement, 98, 1–9. doi: 10.1016/j.measurement.2016.11.029
   Web of Science ®Google Scholar
• Li, J., Zhang, J. H., Qian, G. P., Zheng, J. L., & Zhang, Y. Q. (2019). Three-dimensional simulation of aggregate and asphalt mixture using parameterized shape and size gradation. Journal of Materials in Civil Engineering, 31(3), 04019004. doi: 10.1061/(ASCE)MT.1943-5533.0002623
   Web of Science ®Google Scholar
• Liu, S. J., Yu, X., & Dong, F. Q. (2017). Evaluation of moisture susceptibility of foamed warm asphalt produced by water injection using surface free energy method. Construction and Building Materials, 131, 138–145. doi: 10.1016/j.conbuildmat.2016.11.072
   Web of Science ®Google Scholar
• Luo, R., Huang, T. T., Zhang, D. R., & Lytton, R. L. (2017). Water vapor diffusion in asphalt mixtures under different relative humidity differentials. Construction and Building Materials, 136, 126–138. doi: 10.1016/j.conbuildmat.2017.01.034
   Web of Science ®Google Scholar
• Mehrara, A., & Khodaii, A. (2013). A review of state of the art on stripping phenomenon in asphalt concrete. Construction and Building Materials, 38, 423–442. doi: 10.1016/j.conbuildmat.2012.08.033
   Web of Science ®Google Scholar
• Merusi, F., Caruso, A., Roncella, R., & Giuliani, F. (2010). Moisture susceptibility and stripping resistance of asphalt mixtures modified with different synthetic waxes. Transportation Research Record: Journal of the Transportation Research Board, 2180, 110–120. doi: 10.3141/2180-13
   Web of Science ®Google Scholar
• Mogawer, W. S., Austerman, A. J., & Bahia, H. U. (2011). Evaluating the effect of warm-mix asphalt technologies on moisture characteristics of asphalt binders and mixtures. Transportation Research Record: Journal of the Transportation Research Board, 2209(1), 52–60. doi: 10.3141/2209-07
   Web of Science ®Google Scholar
• Moraes, R., Velasquez, R., & Bahia, H. (2017). Using bond strength and surface energy to estimate moisture resistance of asphalt-aggregate systems. Construction and Building Materials, 130, 156–170. doi: 10.1016/j.conbuildmat.2016.10.043
   Web of Science ®Google Scholar
• Saarenketo, T., & Scullion, T. (2000). Road evaluation with ground penetrating radar. Journal of Applied Geophysics, 43(2), 119–138. doi: 10.1016/S0926-9851(99)00052-X
   Web of Science ®Google Scholar
• Solaimanian, M., Harvey, J., Tahmoressi, M., & Tandon, V. (2004). Test methods to predict moisture sensitivity of hot-mix asphalt pavements. In Moisture sensitivity of asphalt pavements (pp. 78–105). Washington, DC: Transportation Research Board of the National Academies.
   Google Scholar
• Walubita, L. F., Faruk, A. N., Zhang, J., Hu, X., & Lee, S. I. (2016). The Hamburg rutting test – Effects of HMA sample sitting time and test temperature variation. Construction and Building Materials, 108, 22–28. doi: 10.1016/j.conbuildmat.2016.01.031
   Web of Science ®Google Scholar
• Walubita, L. F., Lee, S. I., Faruk, A. N., Scullion, T., Nazarian, S., & Abdallah, I. (2017). Texas flexible pavements and overlays: Year 5 report—Complete data documentation (No. FHWA/TX-15/0-6658-3). Texas A&M Transportation Institute.
   Google Scholar
• Walubita, L. F., Zhang, J., Das, G., Hu, X., Mushota, C., Alvarez, A., & Scullion, T. (2012). Hot-mix asphalt permanent deformation evaluated by Hamburg wheel tracking, dynamic modulus, and repeated load tests. Transportation Research Record: Journal of the Transportation Research Board, 2296, 46–56. doi: 10.3141/2296-05
   Web of Science ®Google Scholar
• Wasiuddin, N., Barraza, H., Zaman, M., & Rear, O. E. (2005). Assessment of surface free energy characteristics of performance graded asphalt binders. Geo-frontiers Congress: Advances in Pavement Engineering, 130, 1–13.
   Google Scholar
• Xiao, F., Zhao, W., Gandhi, T., & Amirkhanian, S. N. (2010). Influence of anti-stripping additives on moisture susceptibility of warm mix asphalt mixtures. Journal of Materials in Civil Engineering, 22(10), 1047–1055. doi: 10.1061/(ASCE)MT.1943-5533.0000111
   Web of Science ®Google Scholar
• Yang, D. T. (2017). Investigation of the excess pore water pressure inside compacted asphalt mixture by dynamic triaxial tests. Construction and Building Materials, 138, 363–371. doi: 10.1016/j.conbuildmat.2017.02.028
   Web of Science ®Google Scholar
• Zheng, C. F., Qin, Y., Lv, D., Zhang, T., Liu, X. Y., & Zheng, S. (2013). Effects of anti-stripping agents on the microscopic strength of mineral aggregate contact surface. Construction and Building Materials, 49, 627–634. doi: 10.1016/j.conbuildmat.2013.08.070
   Web of Science ®Google Scholar
• Zheng, M. L., Wang, C. T., Han, L. L., Sun, Y. Q., Li, Y. F., & Ma, Z. H. (2016). Laboratory evaluation of long-term anti-icing performance and moisture susceptibility of chloride-based asphalt mixture. International Journal of Pavement Research and Technology, 9, 140–148. doi: 10.1016/j.ijprt.2016.04.001
   Google Scholar