References
- AASHTO M320. (2016). Standard method of test for performance graded asphalt binder. Washington: American Association of State Highway and Transportation Officials.
- AASHTO R35-15. (2015). Standard practice for superpave volumetric design for asphalt mixtures. Washington: American Association of State Highway and Transportation Officials.
- AASHTO T313. (2012). Standard method of test for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR). Washington: American Association of State Highway and Transportation Officials.
- AASHTO T314. (2012). Standard method of test for determining the fracture properties of asphalt binder in direct tension (DT). Washington: American Association of State Highway and Transportation Officials.
- AASHTO T315. (2012). Standard method of test for determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR). Washington: American Association of State Highway and Transportation Officials.
- Abbas, A. R., Nazzal, M., Kaya, S., Akinbowale, S., Subedi, B., Arefin, M. S., & Abu Qtaish, L. (2016). Effect of aging on foamed warm mix asphalt produced by water injection. Journal of Materials in Civil Engineering, 28(11), 04016128. doi: 10.1061/(ASCE)MT.1943-5533.0001617
- Abbas, A. R., Nazzal, M., Kaya, S., Akinbowale, S., Subedi, B., & Qtaish, L. A. (2015). Effect of warm mix asphalt on aging of asphalt binders. Proceedings of the TMS middle east—mediterranean materials congress on energy and infrastructure systems (MEMA 2015), pp. 55–64. Springer.
- Anderson, D. A., & Kennedy, T. (1993). Development of SHRP binder specification. Journal of the Association of Asphalt Pavement Technologies, 62, 481–507.
- ASTM D6373-16. (2016). Standard specification for performance graded asphalt binder. Washington: American Association of State Highway and Transportation Officials.
- Bonaquist, R. F. (2011). Mix design practices for warm mix asphalt (Vol. 691) ( National cooperative highway research program-NCHRP report 691). Washington, DC: Transportation Research Board.
- Cannone Falchetto, A., Marasteanu, M. O., & Di Benedetto, H. (2011). Analogical based approach to forward and inverse problems for asphalt materials characterization at low temperatures. Journal of the Association of Asphalt Paving Technologists, 80, 549–581.
- Cannone Falchetto, A., & Moon, K. H. (2015). Micromechanical–analogical modelling of asphalt binder and asphalt mixture creep stiffness properties at low temperature. Road Materials and Pavement Design, 16(sup. 1), 111–137. doi: 10.1080/14680629.2015.1029708
- Cannone Falchetto, A., Turos, I., & Marasteanu, M. O. (2012). Investigation on asphalt binder strength at low temperatures. Road Materials and Pavement Design, 13(4), 804–816. doi: 10.1080/14680629.2012.735793
- Carret, J. C., Cannone Falchetto, A., Marasteanu, M. O., Di Benedetto, H., Wistuba, M. P., & Sauzeat, C. (2015). Comparison of rheological parameters of asphalt binders obtained from bending beam rheometer and dynamic shear rheometer at low temperatures. Road Materials and Pavement Design, 16(1), 211–227. doi: 10.1080/14680629.2015.1029696
- Chowdhury, A., & Button, J. W. (2008). A review of warm mix asphalt. College Station: Texas Transportation Institute, the Texas A & M University System. No. SWUTC/08/473700-00080-1.
- Christensen, R. M. (1982). Theory of viscoelasticity: An introduction. New York: Academic Press.
- Christensen, D. W., & Anderson, D. A. (1992). Interpretation of dynamic mechanical test data for paving grade asphalt cements (with discussion). Journal of the Association of Asphalt Paving Technologists, 61, 67–116.
- Di Benedetto, H., Olard, F., Sauzéat, C., & Delaporte, B. 2004. Linear viscoelastic behaviour of bituminous materials: From binders to mixes. Road Materials and Pavement Design, 5(sup. 1), 163–202. doi: 10.1080/14680629.2004.9689992
- EN 12591. (2015). Bitumen and bituminous binders. Specifications for paving grade bitumens. Brussels: European Committee for Standardization.
- EN 12607-1. (2014). Bitumen and bituminous binders–Determination of the resistance to hardening under the influence of heat and air–Part 1: RTFOT method. Brussels: European Committee for Standardization.
- EN 1426. (2015). Bitumen and bituminous binders. Determination of needle penetration. Brussels: European Committee for Standardization.
- EN 1427. (2015). Bitumen and bituminous binders - determination of the softening point - ring and ball method. Brussels: European Committee for Standardization.
- EN 14769. (2012). Bitumen and bituminous binders. Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV). Brussels: European Committee for Standardization.
- Erkens, S., Porot, L., Glaser, R., & Glover, C. (2016). Review of asphalt concrete aging tests in the US and Europe. The 95th transportation research board annual meeting, Washington, DC, 16-5770.
- European Asphalt Pavement Association (EAPA). (2017). The use of warm mix asphalt (EAPA position paper 2010). Retrieved from www.eapa.org
- Farrar, M., Sui, C., Salmans, S. & Qin, Q. (2015). Determining the low-temperature rheological properties of asphalt binder using a dynamic shear rheometer (DSR) ( Report 4FP 08). Laramie: Western Research Institute.
- Franck, A. J., & Instruments, T. A. (2006). Understanding instrument compliance correction in oscillation (TA Instruments Product Note APN, 13).
- Gandhi, T. (2008). Effects of warm asphalt additives on asphalt binder and mixture properties (Doctoral dissertation). Clemson University.
- Gandhi, T., Akisetty, C., & Amirkhanian, S. (2009). Laboratory evaluation of warm asphalt binder aging characteristics. International Journal of Pavement Engineering, 10(5), 353–359. doi: 10.1080/10298430802342724
- Gandhi, T., Rogers, W., & Amirkhanian, S. (2010). Laboratory evaluation of warm mix asphalt ageing characteristics. International Journal of Pavement Engineering, 11(2), 133–142. doi: 10.1080/10298430903033339
- Garcia Cucalon, L., Kaseer, F., Arámbula-Mercado, E., Epps Martin, A., Morian, N., Pournoman, S., & Hajj, E. (2019). The crossover temperature: Significance and application towards engineering balanced recycled binder blends. Road Materials and Pavement Design, 1–22. doi:10.1080/14680629.2018.1447504 doi: 10.1080/14680629.2019.1588152
- Hanz, A., Faheem, A., Mahmoud, E., & Bahia, H. (2010). Measuring effects of warm-mix additives: Use of newly developed asphalt binder lubricity test for the dynamic shear rheometer. Transportation Research Record: Journal of the Transportation Research Board, 2180, 85–92. doi: 10.3141/2180-10
- Hofko, B., Cannone Falchetto, A., Grenfell, J., Huber, L., Lu, X., Porot, L., Poulikakos, L. & You, Z. (2017a). Effect of short-term ageing temperature on bitumen properties. Road Materials and Pavement Design, 18(sup. 2), 108–117. doi: 10.1080/14680629.2017.1304268
- Hofko, B., Dimitrov, M., Schwab, O., Weiss, F., Rechberger, H., & Grothe, H. (2017b). Technological and environmental performance of temperature-reduced mastic asphalt mixtures. Road Materials and Pavement Design, 18(1), 22–37. doi: 10.1080/14680629.2016.1141703
- Huet, C. (1963). Etude par une Méthode d’Impédance du Comportement Viscoélastique des Ma-tériaux Hydrocarbonés (Thèse de Doctorat d’Ingénieur). Faculté des Sciences de l’Université de Paris. (In French).
- Hurley, G. C., & Prowell, B. D. (2005). Evaluation of Sasobit for use in warm mix asphalt. National Center for Asphalt Technology-NCAT Report, 5(6), 1–27.
- Hurley, G. C., & Prowell, B. D. (2006). Evaluation of potential processes for use in warm mix asphalt (with discussion). Journal of the Association of Asphalt Paving Technologists, 75, 41–90.
- Kanitpong, K., Nam, K., Martono, W., & Bahia, H. (2008). Evaluation of a warm-mix asphalt additive. Proceedings of the Institution of Civil Engineers - Construction Materials, 161(1), 1–8. doi: 10.1680/coma.2008.161.1.1
- Kim, H., Lee, S. J., Amirkhanian, S. N., & Jeong, K. D. (2013). Quantification of oxidative aging of polymer-modified asphalt mixes made with warm mix technologies. Journal of Materials in Civil Engineering, 25(1), 1–8. doi: 10.1061/(ASCE)MT.1943-5533.0000479
- Laukkanen, O. V., Soenen, H., Winter, H. H., & Seppälä, J. (2018). Low-temperature rheological and morphological characterization of SBS modified bitumen. Construction and Building Materials, 179, 348–359. doi: 10.1016/j.conbuildmat.2018.05.160
- Lu, X., Uhlback, P., & Soenen, H. (2017). Investigation of bitumen low temperature properties using a dynamic shear rheometer with 4 mm parallel plates. International Journal of Pavement Research and Technology, 10(1), 15–22. doi: 10.1016/j.ijprt.2016.08.010
- Mangiafico, S., Di Benedetto, H., Sauzéat, C., Olard, F., Pouget, S. & Planque, L. (2013). Influence of reclaimed asphalt pavement content on complex modulus of asphalt binder blends and corresponding mixes: Experimental results and modelling. Road Materials and Pavement Design, 14(sup. 1), 132–148. doi: 10.1080/14680629.2013.774751
- Marasteanu, M. O., & Anderson, D. A. (1999). Improved model for bitumen rheological characterization. In Eurobitume workshop on performance related properties for bituminous binders (pp. 133). Luxembourg: European Bitumen Association.
- Olard, F., & Di Benedetto, H. (2003). General “2S2P1D” model and relation between the linear viscoelastic behaviors of bituminous binders and mixes. Road Materials and Pavement Design, 4(2), 185–224. doi: 10.1080/14680629.2003.9689946
- Porot, L., & Eduard, P. (2016). Addressing asphalt binder aging through the viscous to elastic transition. Proceedings of the ISAP symposium 2016, Jackson Hole Wyoming.
- Poulikakos, L. D., Cannone Falchetto, A., Wistuba, M. P., Hofko, B., Porot, L., & Di Benedetto, H. (2018). RILEM 252-CMB symposium: Chemo-mechanical characterization of bituminous materials. Braunschweig: Springer.
- Poulikakos, L. D., Hofko, B., Porot, L., Lu, X., Fischer, H., & Kringos, N. (2016). Impact of temperature on short- and long-term aging of asphalt binders. RILEM Technical Letters, 1, 6–9. doi: 10.21809/rilemtechlett.2016.4
- Prowell, B. D., Hurley, G. C., & Frank, B. (2011). Warm-mix asphalt: Best practices. Lanham, MD: National Asphalt Pavement Association.
- Rashwan, M. H. (2012). Characterization of warm mix asphalt (WMA) performance in different asphalt applications (Doctoral dissertation). Iowa State University.
- Riccardi, C., Cannone Falchetto, A., Wang, D. & Wistuba, M. (2017). Effect of cooling medium on low-temperature properties of asphalt binder. Road Materials and Pavement Design, 18(sup. 4), 234–255. doi: 10.1080/14680629.2017.1389072
- RILEM TC 252-CMB. (2013). Retrieved from https://www.rilem.net/groupe/252-cmb-chemo-mechanical-characterization-of-bituminous-materials-303
- Sharma, B. K., Ma, J., Kunwar, B., Singhvi, P., Ozer, H., & Rajagopalan, N. (2017). Modeling the performance properties of RAS and RAP blended asphalt mixes using chemical compositional information. Urbana: Illinois Center for Transportation/Illinois Department of Transportation.
- Sterling, V. (2012). Special mixture design considerations and methods for warm mix asphalt: A supplement to NCHRP report 673: A manual for design of hot mix asphalt with commentary (Vol. 714). National Cooperative Highway Research Program-NCHRP. Washington, DC: TRB. Washington, DC: Transportation Research Board.
- Sui, C., Farrar, M., Tuminello, W., & Turner, T. (2010). New technique for measuring low-temperature properties of asphalt binders with small amounts of material. Transportation Research Record: Journal of the Transportation Research Board, 2179, 23–28. doi: 10.3141/2179-03
- Wang, D., Cannone Falchetto, A., Alisov, A., Schrader, J., Riccardi, C., & Wistuba, M. P. (2019). An alternative experimental method for measuring the low temperature rheological properties of asphalt binder using 4-mm parallel plates on dynamic shear rheometer. The 98th transportation research board annual meeting, 19-01718.
- Wang, D., Cannone Falchetto, A., Riccardi, C., Schrader, J., Hofko, B., Poulikakos, L., & Wistuba, M. P. (2018a). Rheological modeling of asphalt binder under different short-and long-term aging conditions. In the 97th Transportation research board annual meeting, 18-04391.
- Wang, D., Cannone Falchetto, A., Riccardi, C., Wistuba, M. P., Poulikakos, L., & Hofko, B. (2018b). Investigation on the effect of cooling medium and aging condition on low-temperature properties of asphalt binder based on BBR. Fortaleza: International Society for Asphalt Pavements (ISAP).
- Williams, M. L., Landel, R. F., & Ferry, J. D. (1955). The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids. Journal of the American Chemical Society, 77(14), 3701–3707. doi: 10.1021/ja01619a008
- Yusoff, N. I. M., Mounier, D., Marc-Stéphane, G., Hainin, M. R., Airey, G. D., & Di Benedetto, H. (2013). Modelling the rheological properties of bituminous binders using the 2S2P1D model. Construction and Building Materials, 38, 395–406. doi: 10.1016/j.conbuildmat.2012.08.038
- Zeng, M., Bahia, H. U., Zhai, H., Anderson, M. R., & Turner, P. (2001). Rheological modeling of modified asphalt binders and mixtures (with discussion). Journal of the Association of Asphalt Paving Technologists, 70, 403–441.