References
- AASHTO. (2011). A policy on geometric design of highways and streets. Washington, DC: AASHTO.
- Anderson, A. D., Huebner, R. S., Reed, R. J., & Warner, C. J. (1998). Improved surface drainage of pavement (Final Report NCHRP 16 Project 1-29).
- Cherry System Research (CSR). (2015). SurPro3500 manual. Retrieved from http://www.surpro.com/index.php/downloads
- Chesterton, J., Nancekivell, N., & Tunnicliffe, N. (2006). The use of Gallaway equation for aquaplaning evaluation in New Zealand. Proc. NZIHT and Transit NZ 8th Annual Conference.
- Chu, L., & Fwa, T. F. (2016). Incorporating pavement Skid resistance and hydroplaning risk considerations in asphalt mix design. Journal of Transportation Engineering, 142(10), 4016039. doi: 10.1061/(ASCE)TE.1943-5436.0000872
- Chu, L., Fwa, T. F., & Ong, G. P. (2015). Evaluating hydroplaning potential of rutted highway pavement. Journal of the Eastern Asia Society for Transportation Studies, 11, 1613–1622.
- Dan, H., Zhang, Z., Liu, X., & Chen, J. (2017). Transient unsaturated flow in the drainage layer of a highway: Solution and drainage performance. Road Materials and Pavement Design, 20, 528–553. doi: 10.1080/14680629.2017.1397049
- Ejsmont, A. J., Ronowski, G., Beata, S., & Sommer, S. (2017). Road texture influence on tyre rolling resistance. Road Materials and Pavement Design, 18(1), 181–198. doi: 10.1080/14680629.2016.1160835
- Fwa, T. F., Tan, S. A., Chuai, C. T., & Guwe, Y. K. (2001). Expedient permeability measurement for porous pavement surface. International Journal of Pavement Engineering, 2(4), 259–270. doi: 10.1080/10298430108901731
- Gallaway, B. M., Hayes, G. G., Ivey, D. L., Ledbetter, W. B., Olson, R. M., Ross, J. H. E., & Woods, D. L. (1979). Pavement and geometric design criteria for minimizing hydroplaning. A technical summary (Final Report, 1). Texas A&M Univ., College Station.
- Hassani, A., & Mohammad, S. (2008). Seepage analysis of Interlocking concrete block pavements. Road Materials and Pavement Design, 9(2), 311–321.
- Horne, W. B., & Dreher, R. C. (1963). Phenomena of pneumatic tire hydroplaning (Report N64 1052 1). NASA Langley Research Center, Hampton, VA.
- HyMIT, Measurement Instrument Technology. (2013). Operation manual: LS-40 pavement surface analyzer (Version 1001.05.06).
- Jayasooriya, W., & Gunaratne, M. (2014). Evaluation of widely used hydroplaning risk prediction methods using Florida’s past crash data. Transportation Research Record: Journal of the Transportation Research Board, 2457(1), 140–150. doi: 10.3141/2457-15
- Kanafi, M. M., & Tuononen, A. J. (2017). Application of three-dimensional printing to pavement texture effects on rubber friction. Road Materials and Pavement Design, 18(4), 865–881. doi: 10.1080/14680629.2016.1194883
- Kane, M., & Do, M. T. (2012). Kinematic wave approach to model water depth on road surface during and after rainfall events. International Journal of Pavement Engineering, 13(5), 385–394. doi: 10.1080/10298436.2011.565768
- Król, B. J., Khan, R., & Collop, C. A. (2018). The study of the effect of internal structure on permeability of porous asphalt. Road Materials and Pavement Design, 19(4), 935–951. doi: 10.1080/14680629.2017.1283355
- Lanza, L. G., Vuerich, E., & Gnecco, I. (2010). Analysis of highly accurate rain intensity measurements from a field test sites. Advances in Geosciences, 25, 37–44. doi: 10.5194/adgeo-25-37-2010
- Luo, W., Wang, C. P. K., & Li, L. (2014). Surface drainage evaluation for rigid pavements using IMU and 1 mm 3D texture data. Transportation Research Record: Journal of the Transportation Research Board, 2457, 121–128. doi: 10.3141/2457-13
- Luo, W., Wang, C. P. K., & Li, L. (2016). Hydroplaning on Sloping pavements based on inertial measurement unit (IMU) and 1 mm 3D laser imaging data. Periodica Polytechnica Transportation Engineering, 44(1), 42–49. doi: 10.3311/PPtr.8208
- Luo, W., Wang, K. C. P., & Li, L. (2017). Field test validation of water film depth (WFD) prediction models for pavement surface drainage. International Journal of Pavement Engineering. doi: 10.1080/10298436.2017.1394099
- MILONE Technology. (2015). eTape™ continuous fluid level sensor. Retrieved from http://www.milonetech.com/About_eTape.php
- National Association of Australian State Road Authorities (NAASRA). (1974). Drainage of wide flat pavements.
- Praticò, F. G., & Moro, A. (2006). Permeability and volumetrics of porous asphalt concrete. Road Materials and Pavement Design, 8(4), 799–817.
- Ram, S., & Chauhan, H. S. (1987). Drainage of sloping lands with constant replenishment. Journal of Irrigation and Drainage Engineering, 113(2), 213–223. doi: 10.1061/(ASCE)0733-9437(1987)113:2(213)
- Ranieri, V., Ying, G., & Sansalone, J. (2012). Drainage modelling of roadway systems with porous friction courses. Journal of Transportation Engineering, 138(4), 395–405. doi: 10.1061/(ASCE)TE.1943-5436.0000338
- Russam, K., & Ross, N. F. (1968). The depth of rain water on road surfaces (Ministry of Transport Report No. LR 236, 25). Road Resea Laboratory.
- Tan, S. A., Fwa, T. F., & Chai, K. C. (2004). Drainage considerations for porous asphalt surface course design. Transportation Research Record Journal of the Transportation Research Board, 1868(1), 142–149. doi: 10.3141/1868-15
- Wambold, J. C., Antle, C. E., Henry, J. J., & Rado, Z. (1995). International PLARC experiment to compare and harmonize texture and skid resistance measurements (AIPCR-01.04.T).
- Wang, K. C. P., & Li, L. (2011). Potential measurement of pavement surface texture based on three-dimensional (3D) image data. Transportation Research Board 91th Annual Meeting, Washington, DC.
- Zhang, L., Ong, G. P., & Fwa, T. F. (2013). Evaluating the influence of aggregate size on permeability of porous pavements using finite volume simulation. International Journal of Pavement Research and Technology, 6(5), 520–526.