2D Multilayer solution for an electrified road with a built-in charging box

References

• Bodin, D., Chupin, O., & Denneman, E. (2017). Viscoelastic asphalt pavement simulations and simplified elastic pavement Models based on an “equivalent asphalt modulus” Concept. Journal of Testing and Evaluation, 45(6), 1887–1895. doi: 10.1520/JTE20160652
   Web of Science ®Google Scholar
• Buttlar, W. G., & Chabot, A. (2018). Introduction. In W. G. Buttlar, A. Chabot, E. V. Dave, C. Petit, & G. Tebaldi (Eds.), Mechanisms of cracking and debonding in asphalt and composite pavements. State-of-the-Art Report of the RILEM Technical Committee 241-MCD Series, 28 (pp. 1–32). Springer International Publishing. Retrieved from https://www.springer.com/gp/book/9783319768489
   Google Scholar
• Caron, J. F., Diaz Diaz, A., Carreira, R. P., Chabot, A., & Ehrlacher, A. (2006). Multi-particle modelling for the prediction of delamination in multi-layered materials. Composites Science and Technology, 66(6), 755–765. doi: 10.1016/j.compscitech.2004.12.022
   Web of Science ®Google Scholar
• Chabot, A. (1997). Analyse des efforts à l’interface entre les couches des matériaux composites à l’aide de Modélisations Multiparticulaires des Matériaux Multicouches (M4) (Doctoral dissertation). Retrieved from https://tel.archives-ouvertes.fr/tel-00197853
   Google Scholar
• Chabot, A., & Deep, P. (2018, June). 2D multilayer analysis of electrified roads with charging box discontinuities. Paper presented at the 13th ISAP Conference on Asphalt Pavements, Fortaleza, Ceará, Brazil.
   Google Scholar
• Chabot, A., Hammoum, F., & Hun, M. (2017). A 4pt bending bond test approach to evaluate water effect in a composite beam. European Journal of Environmental and Civil Engineering, 21(suppl 1), 54–69. doi: 10.1080/19648189.2017.1320237
   Web of Science ®Google Scholar
• Chabot, A., Hun, M., & Hammoum, F. (2013). Mechanical analysis of a mixed mode debonding test for composite pavements. Construction and Building Materials, 40, 1076–1087. doi: 10.1016/j.conbuildmat.2012.11.027
   Web of Science ®Google Scholar
• Chabot, A., Pouteau, B., Balay, J. M., & De Larrard, F. (2008, June). FABAC accelerated loading test of bond between cement overlay and asphalt layers.In I. Al-Qadi, T. Scarpas, & A. Loizos (Eds), Pavement cracking. Proceedings of the 6th Int. RILEM Conf. on Cracking in Pavements (CRC Press, pp. 671–681, doi: 10.1201/9780203882191.ch65). Chicago, US.
   Google Scholar
• Chabot, A., Tran, Q. D., & Ehrlacher, A. (2005). A simplified modeling for cracked pavements. Bulletin des Laboratoires des Ponts et Chaussées, (258–259), 105–120 (ISSN 1269-1496).
   Google Scholar
• Chabot, A., Tran, Q. D., & Ehrlacher, A. (2007, June). A modeling to understand where a vertical crack can propagate in pavements. In A. Loizos, T. Scarpas, & I. L. Al-Qadi (Eds). Proceedings of the International Conference on Advanced Characterisation of Pavement and Soil Engineering (CRC Press, 1, pp. 431– 440). Athens, Greece.
   Google Scholar
• Chen, F., Balieu, R., Córdoba, E., & Kringos, N. (2017). Towards an understanding of the structural performance of future electrified roads: A finite element simulation study. International Journal of Pavement Engineering. doi: 0.1080/10298436.2017.1279487
   Web of Science ®Google Scholar
• Chen, F., Coronado, C. F., Balieu, R., & Kringos, N. (2018). Structural performance of electrified roads: A computational analysis. Journal of Cleaner Production, 195, 1338–1349. doi: 10.1016/j.jclepro.2018.05.273
   Web of Science ®Google Scholar
• Chupin, O., Chabot, A., Bodin, D., & Piau, J.-M. (2014, June). Determination of an equivalent elastic system to a multilayer viscoelastic structure: application to the case of thick flexible pavement. In R. Y. Kim (Ed), Asphalt pavements. Proceedings of the 12th ISAP Conference (CRC Press, 1, 797–804. ISBN 9781138026933), Raleigh, NC, USA.
   Google Scholar
• Corte, J. F., & Goux, M. T. (1996). Design of pavement structures: The French technical guide. Transport Research Report, 1539, 116–124. doi: 10.1177/0361198196153900116
   Google Scholar
• Deep, P. (2017). Mechanical analysis of an eRoad discontinuities (Unpublished master’s thesis). Ecole Centrale de Nantes (ECN), France.
   Google Scholar
• Fisher, T. M., Farley, K. B., Gao, Y., Bai, H., & Tse, Z. T. (2014). Electric vehicle wireless charging technology: A state-of-t-art review of magnetic coupling systems. Wireless Power Transfer, 1(102), 87–96. doi: 10.1017/wpt.2014.8
   Google Scholar
• Hammoum, F., Chabot, A., St. Laurent, D., Chollet, H., & Vulturescu, B. (2010). Effects of accelerating and decelerating tramway loads on bituminous pavement. Materials and Structures, 43, 1257–1269. doi: 10.1617/s11527-009-9577-9
   Web of Science ®Google Scholar
• Mateos, A., Harvey, J., Paniagua, F., & Liu, A. F. (2017). Mechanical characterisation of concrete-asphalt interface in bonded concrete overlays of asphalt pavements. European Journal of Environmental and Civil Engineering, 21(supp 1), 43–53. doi: 10.1080/19648189.2017.1311808
   Web of Science ®Google Scholar
• Nasser, H., & Chabot, A. (2015, September). Two-dimensional software for analysing mechanical fields in elastic cracked pavements. In J. Kruis et al. (Eds), Proceedings of the 5th International Conference on Civil, Structural and Environmental Engineering Computing (Civil-Comp Press, Paper 214, ISBN 978-1-905088-63-8, doi:10.4203/ccp.108.214), Prague, Czech Republic.
   Google Scholar
• Nasser, H., & Chabot, A. (2018). A half-analytical elastic solution for 2D analysis of cracked pavements. Advances in Engineering Software, 117, 107–122. doi: 10.1016/j.advengsoft.2017.06.008
   Web of Science ®Google Scholar
• Nasser, H., Chupin, O., Piau, J. M., & Chabot, A. (2018). Mixed FEM for solving a plate type model intended for analysis of pavements with discontinuities. Road Materials and Pavement Design, 19(3), 496–510. doi: 10.1080/14680629.2018.1418653
   Web of Science ®Google Scholar
• Nguyen, M. L., Hornych, P., Kerzreho, J. P., & Perez, S. (2014, September). Accelerated full scale test on prefabricated concrete slab pavement for electrical supply by induction of urban transport systems. Paper presented at the 12th International Symposium on Concrete Roads, Prague.
   Google Scholar
• Odemark, N. (1949). Investigations as to the elastic properties of soils and design of pavements according to the theory of elasticity (Report 77). Linkoping, Sweden: National Swedish Road and Traffic Research Institute.
   Google Scholar
• Pérez, S., Nguyen, M. L., Hornych, P., & Curran, E. (2016, June). Implementing recharging inductive technology on heavy-duty pavement bringing unlimited autonomy to electrical vehicles. Presented at the 8th Int. RILEM Conf. MCD2016, W3: Roads of the future: towards durable and multi-functional infrastructures, Nantes, France. 2016. Retrieved from https://mcd2016.sciencesconf.org/resource/page/id/15
   Google Scholar
• Petit, C., Chabot, A., Destrée, A., & Raab, C. (2018a). Recommendation of RILEM TC 241-MCD on interface debonding testing in pavements. Materials and Structures, 51(4), article 96. Retrieved from https://link.springer.com/article/10.1617/s11527-018-1223-y
   Web of Science ®Google Scholar
• Petit, C., Chabot, A., Destree, A., & Raab, C. (2018b). Interface debonding behaviour. In W.G. Buttlar, A. Chabot, E. V. Dave, C. Petit, & G. Tebaldi (Eds), Mechanisms of cracking and debonding in asphalt and composite pavements. Chapter III of the state-of-the-art report of the RILEM Technical Committee 241-MCD Series, Vol. 28: 103–154. Cham: Springer, ISBN 978-3-319-76848-9, Series ISSN, 2213-204X doi: 10.1007/978-3-319-76849-6_3
   Google Scholar
• Rasmussen, R. O., & Rozycki, D. K. (2004). Thin and ultra thin whitetopping – a synthesis of highway practice (NCHRP Synthesis 338). Transportation Research Board.
   Google Scholar
• Rim, C. T. (2013). The development and deployment of online electric vehicules (OLEV). IEEE Energy Conversion Congress and Exposition (ECCE), Denver, CO, USA.
   Google Scholar
• Tran, Q. D., Chabot, A., Ehrlacher, A., & Tamagny, P. (2004, May). A simplified modelling for cracking in pavements. In C. Petit, I. Al-Qadi & A. Millien (Eds), Cracking in pavements. Proceedings of the 5th Int. RILEM Conf. Cracking in Pavements (Rilem Proceedings, PRO37-PR, pp. 299-306, ISBN 2-912143-47-0). Limoges, France.
   Google Scholar
• Vandenbossche, J., & Barman, M. (2010). Bonded whitetopping overlay design considerations for prevention of reflection cracking, joint sealing, and the use of dowel bars. Transportation Research Record: Journal of the Transportation Research Board, 2155, 3–11. doi: 10.3141/2155-01
   Web of Science ®Google Scholar