References
- AASHTO T 209. (2015). Theoretical maximum specific gravity and density of hot mix asphalt (HMA). Washington, D.C.: Standard Specifications for Transportation Materials and Methods of Sampling and Testing.
- AASHTO T 283-14. (2015). Standard method of test for resistance of compacted asphalt mixtures to moisture-induced damage. Washington, D.C.: Standard Specifications for Transportation Materials and Methods of Sampling and Testing.
- AASHTO T 321. (2017). Determining the fatigue life of compacted asphalt mixtures subjected to repeated flexural bending. Washington, DC: Standard Specifications for Transportation Materials and Methods of Sampling and Testing.
- AASHTO T 331-13. (2015). Standard method of test for bulk specific gravity (Gmb) and density of compacted hot mix asphalt (HMA) using automatic vacuum sealing method. Washington, D.C.: Standard Specifications for Transportation Materials and Methods of Sampling and Testing.
- AASHTO T 378. (2017). Determining the dynamic modulus and flow number for asphalt mixtures using the asphalt mixture performance tester (AMPT). Washington, D.C.: Standard Specifications for Transportation Materials and Methods of Sampling and Testing.
- AASHTO TP 79-13. (2013). Determining the dynamic modulus and flow number for asphalt mixtures using the asphalt mixture performance tester (AMPT). Washington, D.C.: Standard Specifications for Transportation Materials and Methods of Sampling and Testing.
- Ali, H. (2015, July). Long-term aging of recycled binders. Miami, FL: Florida International University: Civil and Environmental Engineering Department; submitted to the Florida Department of Transportation.
- Antoine, Jean-Pierre, & Marcilloux, Jerome. (2014). United States Patent No. US 8,652,246 B2.
- ASTM D2172. (2007). Standard test methods for quantitative extraction of asphalt binder from asphalt mixes. Washington, D.C.: Standard Specifications for Transportation Materials and Methods of Sampling and Testing.
- ASTM D7313. (2007). Standard test method for determining fracture energy of asphalt-aggregate mixtures using the disk-shaped compact tension geometry. Washington, D.C.: Standard Specifications for Transportation Materials and Methods of Sampling and Testing.
- ASTM D7906. (2007). Standard practice for recovery of asphalt from solution using toluene and the rotary evaporator. Washington, D.C.: Standard Specifications for Transportation Materials and Methods of Sampling and Testing.
- Buncher, Mark, Anderson, Mike, & Asphalt Institute. (2014). Asphalt mix design methods (7th ed.). Lexington, KY: Asphalt Institute Manual Series NO. 2.
- Buttlar, W. G., Ahmed, S., Dave, E. V., & Braham, A. F. (2010, January). Comprehensive database of asphalt concrete fracture energy and links to field performance. Paper presented at the 89th annual meeting of the transportation research board, Washington, DC.
- Carpenter, S. H. (2006, July). Fatigue performance of IDOT mixtures. Research Report FHWA-ICT-07-007, Illinois Center for Transportation.
- Cascione, A. A., Williams, R. C., Buttlar, W. G., Ahmed, S., Hill, B., Haugen, D. S., & Gillen, S. (2011). Laboratory evaluation of field produced hot mix asphalt containing post-consumer recycled asphalt shingles and fractionated recycled asphalt pavement (Vol. 80). Asphalt Paving Technology, Association of Asphalt Paving Technologies.
- EAPA (European industry association). (2016). Asphalt in figures. Retrieved from www.eapa.org
- FHWA, U.S. (2011, April). Department of transportation federal highway administration. Reclaimed asphalt pavement in asphalt mixtures: State of the practice. FHWA Publication No. FHWA-HRT-11-021.
- Haghshenas, H., Nabizadeh, H., Kim, Y-R., & Santosh, K. (2016, September). Research on high-RAP asphalt mixtures with rejuvenators and WMA additives. University of Nebraska-Lincoln: Nebraska Department of Roads Research Reports.
- Huang, Y. H. (2004). Pavement analysis and design (2nd ed.). Upper Saddle River, NJ: Prentice Hall.
- Jiménez del Barco Carrión, A., Lo Presti, D., Pouget, S., Airey, G., & Chailleux, E. (2017a). Linear viscoelastic properties of high reclaimed asphalt content mixes with biobinders. Road Materials and Pavement Design, 18, 1–11. doi: 10.1080/14680629.2017.1389095
- Jiménez del Barco Carrión, A., Pérez-Martínez, M., Themeli, A., Lo Presti, D., Marsac, P., Pouget, S., … Airey, G. D. (2017b). Evaluation of bio-materials’ rejuvenating effect on binders for high-reclaimed asphalt content mixtures. Materiales de Construcción, 67(327), 1–11.
- Kowalski, K., Król, J., Bańkowski, W., Radziszewski, P., & Sarnowski, M. (2017, February). Thermal and fatigue evaluation of asphalt mixtures containing RAP treated with a bio-agent. Applied Sciences, 7(3). doi: 10.3390/app7030216
- National Center for Asphalt Technology (NCAT). (1991). Hot Mix asphalt materials, mixture design and construction (3rd ed.). Lanham, MD: NCAT.
- National Cooperative Highway Research Program. (2011). NCHRP report 673: A manual for design of hot mix asphalt with commentary. Transportation Research Board, Washington DC.
- Pouget, S., & Loup, L. (2013). Thermo-mechanical behaviour of mixtures containing bio-binders. Road Material and Pavement Design, Special Issue EATA, 14, 212–226. doi: 10.1080/14680629.2013.774758
- Zaumanis, M., Mallick, R. B., Poulikakos, L., & Frank, R. (2014, November). Influence of Six rejuvenators on the performance properties of reclaimed asphalt pavement (RAP) binder and 100% recycled asphalt mixtures. Construction and Building Materials.