References
- AASHTO MP 19. (2010). Standard specification for performance-graded asphalt binder using multiple stress creep recovery (MSCR) test. American Association of State Highway and Transportation Officials.
- AASHTO T 324. (2016). Standard method of test for Hamburg wheel-track testing of compacted asphalt mixtures. American Association of State Highway and Transportation Officials.
- AASHTO TP 123. (2016). Standard method of test for measuring asphalt binder yield energy and elastic recovery using the dynamic shear rheometer. American Association of State Highway and Transportation Officials.
- Airey, G. D. (2002). Rheological evaluation of ethylene vinyl acetate polymer modified bitumens. Construction and Building Materials, 16(8), 473–487. https://doi.org/10.1016/S0950-0618(02)00103-4
- Airey, G. D., Rahman, M. M., & Collop, A. C. (2003). Absorption of bitumen into crumb rubber using the basket drainage method. International Journal of Pavement Engineering, 4(2), 105–119. https://doi.org/10.1080/1029843032000158879
- Arabani, M., Tahami, S. A., & Hamedi, G. H. (2018). Performance evaluation of dry process crumb rubber-modified asphalt mixtures with nanomaterial. Road Materials and Pavement Design, 19(5), 1241–1258. https://doi.org/10.1080/14680629.2017.1302356
- ASTM D2872. (2012). Standard test method for effect of heat and air on a moving film of asphalt [Rolling thin-film oven test]. ASTM International, West Conshohocken, PA.
- ASTM D4402. (2015). Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer. ASTM International.
- ASTM D6373. (2016). Standard specification for performance graded asphalt binder. ASTM International.
- ASTM D6521. (2018). Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV). ASTM International.
- ASTM D6931. (2017). Standard test method for indirect tensile (IDT) strength of asphalt mixtures. ASTM International.
- ASTM D7173. (2014). Standard practice for determining the separation tendency of polymer from polymer modified asphalt. ASTM International.
- Bahia, H. U., & Davies, R. (1995). Factors controlling the effect of crumb rubber on critical properties of asphalt binders. Journal of the Association of Asphalt Paving Technologists, 64, 130–162. https://scholar.google.co.in/scholar?hl=en&as_sdt=0%2C5&q=Factors+controlling+the+effect+of+crumb+rubber+on+critical+properties+of+asphalt+binders&btnG.
- Bahia, H. U., Tabatabaee, N., Clopotel, C., & Golalipour, A. (2011). Evaluation of the MSCR test for modified binder specification. CTAA Annual Conference Proceedings-Canadian Technical Asphalt Association, 56, 203. https://scholar.google.co.in/scholar?hl=en&as_sdt=0%2C5&q=Evaluation+of+the+MSCR+test+for+modified+binder+specification&btnG.
- Barlow, F. W. (1988). Rubber compounding: Principles, materials and techniques. M. Dekker.
- Biswas, K. G., & Pellinen, T. K. (2007). Practical methodology of determining the in situ dynamic (complex) moduli for engineering analysis. Journal of Materials in Civil Engineering, 19(6), 508–514. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:6(508)
- Brasileiro, L. L., Moreno-Navarro, F., Martínez, R. T., del Sol-Sánchez, M., Matos, J. M. E., & del Carmen Rubio-Gámez, M. (2019). Study of the feasibility of producing modified asphalt bitumens using flakes made from recycled polymers. Construction and Building Materials, 208, 269–282. https://doi.org/10.1016/j.conbuildmat.2019.02.095
- British Standard Institution. BS EN 12697-26. (2004). Bituminous mixtures-test methods for hot mix asphalt-part 26 stiffness.
- Chandra, S., & Choudhary, R. (2013). Performance characteristics of bituminous concrete with industrial wastes as filler. Journal of Materials in Civil Engineering, 25(11), 1666–1673. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000730
- Fukumori, K., & Matsushita, M. (2003). Material recycling technology of crosslinked rubber waste. R&D Review of Toyota CRDL, 38(1), 39–47.
- García-Travé, G., Tauste, R., Moreno-Navarro, F., Sol-Sánchez, M., & Rubio-Gámez, M. C. (2016). Use of reclaimed geomembranes for modification of mechanical performance of bituminous binders. Journal of Materials in Civil Engineering, 28(7), 04016021. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001507
- Ghoreishi, A., Koosha, M., & Nasirizadeh, N. (2018). Modification of bitumen by EPDM blended with hybrid nanoparticles: Physical, thermal, and rheological properties. Journal of Thermoplastic Composite Materials, 33(3), 1–14. https://doi.org/10.1177/0892705718805536
- Ginic-Markovic, M., Choudhury, N. R., Dimopoulos, M., Matisons, J., & Kumudinie, C. (2001). Macromolecular modification of EPDM: Wettability, miscibility, and morphology study. Journal of Applied Polymer Science, 80(14), 2647–2661. https://doi.org/10.1002/app.1378
- Golalipour, A. (2011). Modification of multiple stress creep and recovery test procedure and usage in specification [Doctoral dissertation]. Madison: Department of Civil and Environmental Engineering, College of Engineering, University of Wisconsin. http://digital.library.wisc.edu/1793/56398.
- Golalipour, A., Bahia, H. U., & Tabatabaee, H. A. (2016). Critical considerations toward better implementation of the multiple stress creep and recovery test. Journal of Materials in Civil Engineering, 29(5), 04016295. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001803
- Hu, X., Zhang, H., Bai, T., Pan, P., Xu, P., & Walubita, L. F. (2019). Effects of using brake pad waste powder as a filler material on the rheological and mechanical properties of a sulfur modified asphalt mixture. Construction and Building Materials, 198, 742–750. https://doi.org/10.1016/j.conbuildmat.2018.12.007
- Huang, S. C. (2008). Rubber concentrations on rheology of aged asphalt binders. Journal of Materials in Civil Engineering, 20(3), 221–229. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:3(221)
- IS 1203. (1978). Methods for testing tar and bituminous materials, penetration test. Bureau of Indian Standards.
- IS 1205. (1978). Methods for testing tar and bituminous materials, softening point test. Bureau of Indian Standards.
- IS 15462. (2004). Polymer and rubber modified bitumen – specification. Bureau of Indian Standards.
- IS 73. (2013). Paving bitumen – specification. Bureau of Indian Standards.
- Johnson, C., Bahia, H., & Wen, H. (2009). Practical application of viscoelastic continuum damage theory to asphalt binder fatigue characterization. Journal of Association of Asphalt Paving Technologists, 28, 597–638. https://scholar.google.co.in/scholar?hl=en&as_sdt=0%2C5&q=Practical+application+of+viscoelastic+continuum+damage+theory+to+asphalt+binder+fatigue+characterization&btnG.
- Julaganti, A., Choudhary, R., & Kumar, A. (2017). Rheology of modified binders under varying doses of WMA additive–sasobit. Petroleum Science and Technology, 35(10), 975–982. https://doi.org/10.1080/10916466.2017.1297827 doi: 10.1080/10916466.2017.1297827
- Kalantar, Z. N., Karim, M. R., & Mahrez, A. (2012). A review of using waste and virgin polymer in pavement. Construction and Building Materials, 33, 55–62. https://doi.org/10.1016/j.conbuildmat.2012.01.009
- Kandhal, P. S. (2006). Quality control requirements for using crumb rubber modified bitumen (CRMB) in bituminous mixtures. Journal of the Indian Roads Congress, 67(1), 99–104. https://scholar.google.co.in/scholar?hl=en&as_sdt=0%2C5&q=Quality+control+requirements+for+using+crumb+rubber+modified+bitumen+%28CRMB%29+in+bituminous+mixtures&btnG.
- Karahrodi, M. H., Jazani, O. M., Paran, S. M. R., Formela, K., & Saeb, M. R. (2017). Modification of thermal and rheological characteristics of bitumen by waste PET/GTR blends. Construction and Building Materials, 134, 157–166. https://doi.org/10.1016/j.conbuildmat.2016.12.134
- Kumar, A., Choudhary, R., Kandhal, P. S., Julaganti, A., Behera, O. P., Singh, A., & Kumar, R. (2020). Fatigue characterisation of modified asphalt binders containing warm mix asphalt additives. Road Materials and Pavement Design, 21(2), 519–541. https://doi.org/10.1080/14680629.2018.1507921.
- Liu, H., Chen, Z., Wang, W., Wang, H., & Hao, P. (2014). Investigation of the rheological modification mechanism of crumb rubber modified asphalt (CRMA) containing TOR additive. Construction and Building Materials, 67, 225–233. https://doi.org/10.1016/j.conbuildmat.2013.11.031
- Lu, Q., & Harvey, J. T. (2006). Evaluation of Hamburg wheel-tracking device test with laboratory and field performance data. Transportation Research Record, 1970(1), 25–44. https://doi.org/10.1177/0361198106197000103 doi: 10.1177/0361198106197000103
- McNally, T. (2011). Introduction to polymer modified bitumen (PmB). Woodhead Publishing.
- Metcalf, J. B., Gopalakrishnan, K., & Waters, M. D. (2000). An initial investigation of the use of a rubber waste (EPDM) in asphalt concrete mixtures. Waste Management Series, 1, 940–952. https://doi.org/10.1016/S0713-2743(00)80102-6
- Moreno-Navarro, F., Tauste, R., Sol-Sánchez, M., & Rubio-Gámez, M. C. (2019). New approach for characterising the performance of asphalt binders through the multiple stress creep and recovery test. Road Materials and Pavement Design, 20(sup1), S500–S520. https://doi.org/10.1080/14680629.2019.1595094
- MoRTH. (2013). Specifications for road and bridge works (Fifth Revision). Indian Roads Congress, Govt. of India, Ministry of Road Transport and Highways.
- Murphy, M., O'Mahony, M., Lycett, C., & Jamieson, I. (2000). Bitumens modified with recycled polymers. Materials and Structures, 33(7), 438–444. https://doi.org/10.1007/BF02480663
- Navarro, F. J., Partal, P., Martinez-Boza, F. J., & Gallegos, C. (2010). Novel recycled polyethylene/ground tire rubber/bitumen blends for use in roofing applications: Thermo-mechanical properties. Polymer Testing, 29(5), 588–595. https://doi.org/10.1016/j.polymertesting.2010.03.010
- Padhan, R. K., Gupta, A. A., & Sreeram, A. (2019). Effect of cross-linking agent on ethylene vinyl acetate/polyoctenamer modified bitumen. Road Materials and Pavement Design, 20(7), 1615–1623. https://doi.org/10.1080/14680629.2018.1467335
- Pellinen, T. K., & Witczak, M. W. (2002). Stress dependent master curve construction for dynamic (complex) modulus. Journal of Association of Asphalt Paving Technologists, 71, 281–309. https://scholar.google.co.in/scholar?hl=en&as_sdt=0%2C5&q=Stress+dependent+master+curve+construction+for+dynamic+%28complex%29+modulus&btnG.
- Pellinen, T. K., Witczak, M. W., & Bonaquist, R. F. (2002). Asphalt mix master curve construction using sigmoidal fitting function with non-linear least square optimization. In Recent advances in materials characterization and modeling of pavement systems (pp. 83–101).
- Polacco, G., Filippi, S., Merusi, F., & Stastna, G. (2015). A review of the fundamentals of polymer-modified asphalts: Asphalt/polymer interactions and principles of compatibility. Advances in Colloid and Interface Science, 224, 72–112. https://doi.org/10.1016/j.cis.2015.07.010
- Roberts, F. L., Kandhal, P. S., Brown, E. R., Lee, D. Y., & Kennedy, T. W. (1996). Hot mix asphalt materials, mixture design, and construction (2nd ed.). NAPA Education Foundation.
- Saboo, N., & Kumar, P. A. (2015). Study on creep and recovery behavior of asphalt binders. Construction and Building Materials, 96, 632–640. https://doi.org/10.1016/j.conbuildmat.2015.08.078
- Sangiorgi, C., Eskandarsefat, S., Tataranni, P., Simone, A., Vignali, V., Lantieri, C., & Dondi, G. (2017). A complete laboratory assessment of crumb rubber porous asphalt. Construction and Building Materials, 132, 500–507. https://doi.org/10.1016/j.conbuildmat.2016.12.016
- Sangiorgi, C., Tataranni, P., Simone, A., Vignali, V., Lantieri, C., & Dondi, G. (2014). Waste bleaching clays as fillers in hot bituminous mixtures. Construction and Building Materials, 73, 320–325. https://doi.org/10.1016/j.conbuildmat.2014.09.076
- Shen, J., & Amirkhanian, S. (2005). The influence of crumb rubber modifier (CRM) microstructures on the high temperature properties of CRM binders. International Journal of Pavement Engineering, 6(4), 265–271. https://doi.org/10.1080/10298430500373336
- Sienkiewicz, M., Borzędowska-Labuda, K., Wojtkiewicz, A., & Janik, H. (2017). Development of methods improving storage stability of bitumen modified with ground tire rubber: A review. Fuel Processing Technology, 159, 272–279. https://doi.org/10.1016/j.fuproc.2017.01.049
- Sun, D., Ye, F., Shi, F., & Lu, W. (2006). Storage stability of SBS-modified road asphalt: Preparation, morphology, and rheological properties. Petroleum Science and Technology, 24(9), 1067–1077. https://doi.org/10.1081/LFT-200048186
- Threadingham, D., Obrecht, W., Wieder, W., Wachholz, G., & Engehausen, R. (2000). Rubber, 3. Synthetic rubbers, introduction and overview. In Ullmann's encyclopedia of industrial chemistry. https://doi.org/10.1002/14356007.a23_239.pub5
- Yousefi, A. A. (2003). Polyethylene dispersions in bitumen: The effects of the polymer structural parameters. Journal of Applied Polymer Science, 90(12), 3183–3190. https://doi.org/10.1002/app.12942
- Zhang, F., & Hu, C. (2016). The research for crumb rubber/waste plastic compound modified asphalt. Journal of Thermal Analysis and Calorimetry, 124(2), 729–741. https://doi.org/10.1007/s10973-015-5198-4
- Zhang, L., Xing, C., Gao, F., Li, T. S., & Tan, Y. Q. (2016). Using DSR and MSCR tests to characterize high temperature performance of different rubber modified asphalt. Construction and Building Materials, 127, 466–474. https://doi.org/10.1016/j.conbuildmat.2016.10.010
- Zhang, F., & Yu, J. (2010). The research for high-performance SBR compound modified asphalt. Construction and Building Materials, 24(3), 410–418. https://doi.org/10.1016/j.conbuildmat.2009.10.003