References
- AASHTO Standard T342. (2011). Standard method of test for determining dynamic modulus of hot mix asphalt (HMA).
- Albalat, S. A., Domingo, L. M., Sanchis, I. V., Herráz, J. I. R., & Segarra, A. V. (2011). Crumb rubber modified bitumen for sub-ballast layer. Proceedings of the 9th World Congress on Railway Research, Lille, France, May 22 - 26, 2011.
- Alves, T. F. (2018). Análise do comportamento de via permanente lastrada com emprego de sublastro betuminoso (Master’s thesis). USP digital library of thesis and dissertations. https://doi.org/https://doi.org/10.11606/D.3.2018.tde-23052018-100410
- Alves, T. F., Merheb, A., Moura, E., & Motta, R. (2017, November 27–30). Emprego de mistura asfáltica como sublastro de via permanente: execução e instrumentação do primeiro trecho experimental brasileiro. Proceedings of the XIX Congreso Ibero-Latinoamericano del Asfalto, Medellín, Colombia.
- AREMA. (2020). Manual for railway engineering.
- ASTM Standard D1188. (2015). Bulk specific gravity and density of compacted bituminous mixtures using coated samples.
- ASTM Standard D2041. (2011). Standard test method for theoretical maximum specific gravity and density of bituminous paving mixtures.
- ASTM Standard D2726. (2005). Standard test method for bulk specific gravity and density of non-absorptive compacted bituminous mixtures.
- ASTM Standard D7369. (2011). Standard test method for determining the resilient modulus of bituminous mixtures by indirect tension test.
- Badeli, S., Carter, A., & Doré, G. (2016). The Importance of asphalt mixture air voids on the damage evolution during freeze-thaw cycles. In Proceedings of the 61st Annual Conference of the Canadian Technical Asphalt Association (Vol. 61, pp. 57–82), Banff, Canada.
- Bryson, L. S., & Rose, J. G. (2009). Pressure measurements and structural performance of hot mixed asphalt railway trackbeds. In Proceedings of the 8th International Conference on the Bearing Capacity of Roads, Railways and Airfields (Vol. 2, pp. 1219–1229), Champaign, United States. https://doi.org/https://doi.org/10.1201/9780203865286.ch128
- Cardona, D. R., Di Benedetto, H., Sauzeat, C., Calon, N., & Saussine, G. (2016). Use of a bituminous mixture layer in high-speed line trackbeds. Construction and Building Materials, 125, 398–407. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2016.07.118
- Costa, R., Motta, R., Moura, E., Filho, J. J. P. d. O., & Bernucci, L. (2017, September 2–6). Measuring device for in situ determination of the track modulus in a heavy haul track. Proceedings of the IHHA 2017: Advancing Heavy Haul Technologies and Operations in a Changing World, Cape Town, South Africa.
- D’Angelo, G., Thom, N., & Lo Presti, D. (2016). Bitumen stabilized ballast: A potential solution for railway track-bed. Construction and Building Materials, 124, 118–126. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2016.07.067
- Di Mino, G., Di Liberto, M., Maggiore, C., & Noto, S. (2012). A dynamic model of ballasted rail track with bituminous sub-ballast layer. Procedia – Social and Behavioral Sciences, 53, 366–378. https://doi.org/https://doi.org/10.1016/j.sbspro.2012.09.888
- Di Mino, G., Di Liberto, M., Noto, S., & Soto, F. M. (2015). The resistance to fatigue of dry asphalt rubber concrete for sub-ballast layer. Proceedings of the 15th International Conference of Railway Engineering, Madrid, Spain.
- DNIT Standard 031/2004. (2004). Pavimentos flexíveis - Concreto asfáltico - Especificação de Serviço.
- Esmaeili, M., Amiri, S., & Jadidi, K. (2014). An investigation into the use of asphalt layers to control stress and strain levels in railway track foundations. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 228(2), 182–193. https://doi.org/https://doi.org/10.1177/0954409712468850
- Harvey, J. T., & Tsai, B.-W. (1996). Effects of asphalt content and air void content on mix fatigue and stiffness. Transportation Research Record: Journal of the Transportation Research Board, 1543(1), 38–45. https://doi.org/https://doi.org/10.1177/0361198196154300105
- Hofko, B., Blab, R., & Mader, M. (2012). Impact of air void content on the viscoelastic behavior of hot mix asphalt. In Proceedings of the 3rd conference on four-point bending (pp. 139–149). https://doi.org/https://doi.org/10.1201/b12767-16
- Hu, S., Lee, S.-I., Walubita, L. F., Zhou, F., & Scullion, T. (2018). Incorporation of endurance limit in the mechanistic-empirical flexible perpetual pavement design. Transportation Research Record: Journal of the Transportation Research Board, 2672(40), 108–121. https://doi.org/https://doi.org/10.1177/0361198118797781
- Huang, Y. H. (2004). Pavement design and analysis. Pearson/Prentice Hall.
- Huang, Y. H., Rose, J. G., & Khoury, C. J. (1987). Thickness design for hot-mix asphalt railroad trackbed. Annual Journal AAPT, 56(87), 427–453.
- Indraratna, B., & Nimbalkar, S. (2013). Stress-strain degradation response of railway ballast stabilized with geosynthetics. Journal of Geotechnical and Geoenvironmental Engineering, 139(5), 684–700. https://doi.org/https://doi.org/10.1061/(ASCE)GT.1943-5606.0000758
- Indraratna, B., Qi, Y., Ngo, T., Rujikiatkamjorn, C., Neville, T., Ferreira, F., & Shahkolahi, A. (2019). Use of geogrids and recycled rubber in railroad infrastructure for enhanced performance. Geosciences, 9(1), 30. https://doi.org/https://doi.org/10.3390/geosciences9010030
- Jamrah, A., & Kutay, M. E. (2015). Investigation of different methods for obtaining asphalt mixture creep compliance for use in pavement mechanistic–empirical design software. Transportation Research Record: Journal of the Transportation Research Board, 2524(1), 100–109. https://doi.org/https://doi.org/10.3141/2524-10
- Khairallah, D., Blanc, J., Cottineau, L. M., Hornych, P., Piau, J. M., Pouget, S., & Savin, F. (2019). Monitoring of railway structures of the high speed line BPL with bituminous and granular sublayers. Construction and Building Materials, 211, 337–348. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.03.084
- Kim, Y. R. (2009). Modeling of asphalt concrete (1st ed.). McGraw-Hill Professional.
- Li, D., & Selig, E. T. (1995). Evaluation of railway subgrade problems. Transportation Research Record, 1489, 17–25.
- Lidén, T., & Joborn, M. (2016). Dimensioning windows for railway infrastructure maintenance: Cost efficiency versus traffic impact. Journal of Rail Transport Planning and Management, 6(1), 32–47. https://doi.org/https://doi.org/10.1016/j.jrtpm.2016.03.002
- Ma, T., Zhang, Y., Zhang, D., Yan, J., & Ye, Q. (2016). Influences by air voids on fatigue life of asphalt mixture based on discrete element method. Construction and Building Materials, 126, 785–799. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2016.09.045
- Masad, E., Muhunthan, B., Shashidhar, N., & Harman, T. (1999). Internal structure characterization of asphalt concrete using image analysis. Journal of Computing in Civil Engineering, 13(2), 88–95. https://doi.org/https://doi.org/10.1061/(ASCE)0887-3801(1999)13:2(88)
- Michalczyk, R. (2011). Implementation of generalized viscoelastic material model in Abaqus code. Logistyka, 6, 2883–2890.
- Nilsson, R. N., Hopman, P. C., & Isacsson, U. (2002). Influence of different rheological models on predicted pavement responses in flexible pavements. Road Materials and Pavement Design, 3(2), 117–149. https://doi.org/https://doi.org/10.1080/14680629.2002.9689918
- Paiva, C. E. L., Buck, A. P., & Ferreira, A. (2018). Sub-ballast performance in Brazilian railway infrastructures. Construction and Building Materials, 190, 164–169. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.09.093
- Paixão, A., & Fortunato, E. (2010). Rail track structural analysis using three-dimensional numerical models. In Numerical methods in geotechnical engineering (pp. 575–580). CRC Press. https://doi.org/https://doi.org/10.1201/b10551-105
- Park, S. W., & Schapery, R. A. (1999). Methods of interconversion between linear viscoelastic material functions. Part I – A numerical method based on prony series. International Journal of Solids and Structures, 36(11), 1653–1675. https://doi.org/https://doi.org/10.1016/S0020-7683(98)00055-9
- Perraton, D., Di Benedetto, H., Sauzéat, C., Hofko, B., Graziani, A., Nguyen, Q. T., Pouget, S., Poulikakos, L. D., Tapsoba, N., & Grenfell, J. (2016). 3Dim experimental investigation of linear viscoelastic properties of bituminous mixtures. Materials and Structures/Materiaux et Constructions, 49(11), 4813–4829. https://doi.org/https://doi.org/10.1617/s11527-016-0827-3
- Pirozzolo, L., Sol-Sánchez, M., Moreno-Navarro, F., Martínez-Montes, G., & Rubio-Gámez, M. C. (2017). Evaluation of bituminous sub-ballast manufactured at low temperatures as an alternative for the construction of more sustainable railway structures. Materiales de Construccion, 67(327), 1–12. https://doi.org/https://doi.org/10.3989/mc.2017.04816
- Profillidis, V. A. (2006). Railway management and engineering (3a). Hampshire.
- Rangel, G. W. A., Aragão, F. T. S., & Motta, L. M. G. (2015, August 18–21). Modelagem computacional do pavimento ferroviário usando concreto asfáltico como alternativa para a construção da camada de sublastro. Proceedings of the 44ª Reunião Anual de Pavimentação, Foz do Iguaçu, Brazil.
- Robinet, A., & Cuccaroni, A. (2010). Sub-ballast layer made of bituminous material. In Proceedings of the 7th World Congress on High-Speed Rail (pp. 727–730), Beijing, China.
- Romanoschi, S. A., Gisi, A. J., Portillo, M., & Dumitru, C. (2008). First findings from the Kansas perpetual pavements experiment. Transportation Research Record: Journal of the Transportation Research Board, 2068(1), 41–48. https://doi.org/https://doi.org/10.3141/2068-05
- Rose, J. G., & Bryson, L. S. (2009). Hot mix asphalt railway trackbeds: Trackbed materials, performance evaluations, and significant implications. In Proceedings of the International Conference on Perpetual Pavements (Vol. 7326, pp. 1–19), Columbus, United States.
- Rose, J. G., Teixeira, P. F., & Veit, P. (2011). International design practices, applications, and performances pf asphalt/bituminous railway trackbeds. In Proceedings of the Railway Geotechnical Engineering International Symposium (GeoRail 2011) (pp. 1–23), Paris, France.
- Safi, F. R., Hossain, K., Wu, S., Al-Qadi, I. L., & Ozer, H. (2018). A model to predict creep compliance of asphalt mixtures containing recycled materials. Construction and Building Materials, 184, 374–381. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.06.232
- Selig, E. T., & Li, D. (1994). Track modulus: Its meaning and factors influencing it. Transportation Research Record, 1470, 47–54.
- Sharma, S. K., & Kumar, A. (2016). Dynamics analysis of wheel rail contact using FEA. Procedia Engineering, 144, 1119–1128. https://doi.org/https://doi.org/10.1016/j.proeng.2016.05.076
- Sol-Sánchez, M., Pirozzolo, L., Moreno-Navarro, F., & Rubio-Gámez, M. C. (2016). A study into the mechanical performance of different configurations for the railway track section: A laboratory approach. Engineering Structures, 119, 13–23. https://doi.org/https://doi.org/10.1016/j.engstruct.2016.04.008
- Teixeira, P. F., López Pita, A., & Ferreira, P. A. (2010). New possibilities to reduce track costs on high-speed lines using a bituminous sub-ballast layer. International Journal of Pavement Engineering, 11(4), 301–307. https://doi.org/https://doi.org/10.1080/10298431003749733
- Underwood, B. S. (2011). Multiscale constitutive modeling of asphalt concrete (Doctoral dissertation). https://repository.lib.ncsu.edu/handle/1840.16/7217
- Underwood, B. S., & Kim, Y. R. (2013). Effect of volumetric factors on the mechanical behavior of asphalt fine aggregate matrix and the relationship to asphalt mixture properties. Construction and Building Materials, 49, 672–681. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2013.08.045
- Witczak, M. W., & Fonseca, O. A. (1996). Revised predictive model for dynamic (complex) modulus of asphalt mixtures. Transportation Research Record: Journal of the Transportation Research Board, 1540(1), 15–23. https://doi.org/https://doi.org/10.1177/0361198196154000103
- Witczak, M., Mamlouk, M., Souliman, M., & Zeiada, W. (2013). Laboratory validation of an endurance limit for asphalt pavements ( No. Project 9-44A). Transportation Research Board. https://doi.org/https://doi.org/10.17226/22453
- Yu, Z., Connolly, D. P., Woodward, P. K., & Laghrouche, O. (2019). Settlement behaviour of hybrid asphalt-ballast railway tracks. Construction and Building Materials, 208, 808–817. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.03.047
- Yue, Z., Bekking, W., & Morin, I. (1995). Application of digital image processing to quantitative study of asphalt concrete microstructure. Transportation Research Record, 1492, 53–60.