Use of calcium-rich wood biomass combustion ashes as filler in hot mix asphalt

References

• AASHTO. (1991). Hot-mix Asphalt Paving Handbook (AASHTO Reports). American Association of State Highway and Transportation Officials, National Research Council (U.S.). Transportation Research Board, United States. Army. Corps of Engineers
   Google Scholar
• Abbasalizadeh Boura, S., & Hesami, S. (2020). Laboratory evaluation of the performance of asphalt mixtures containing biomass fillers. Road Materials and Pavement Design, 21(7), 2040–2053. https://doi.org/10.1080/14680629.2019.1572528
   Web of Science ®Google Scholar
• Aboutalebi Esfahani, M., & Kalani, M. (2020). Petrographic analysis method for evaluation and achieving durable hot mix asphalt. Construction and Building Materials, 234, 117408. https://doi.org/10.1016/j.conbuildmat.2019.117408
   Web of Science ®Google Scholar
• Ahmed, H. Y., Othman, A. M., & Mahmoud, A. A. (2006). Effect of using waste cement dust as a mineral filler on the mechanical properties of hot mix asphalt. Ass. Univ. Bull. Environ. Res, 9(1), 51–60.
   Google Scholar
• Akbari, A., & Modarres, A. (2020). Fatigue response of HMA containing modified bitumen with nano-clay and nano-alumina and its relationship with surface free energy parameters. Road Materials and Pavement Design, 21(6), 1490–1513. https://doi.org/10.1080/14680629.2018.1553733
   Web of Science ®Google Scholar
• Al-Hdabi, A. (2016). Laboratory investigation on the properties of asphalt concrete mixture with Rice Husk Ash as filler. Construction and Building Materials, 126, 544–551. https://doi.org/10.1016/j.conbuildmat.2016.09.070
   Web of Science ®Google Scholar
• Arabani, M., Babamohammadi, S., & Azarhoosh, A. R. (2015). Experimental investigation of seashells used as filler in hot mix asphalt. International Journal of Pavement Engineering, 16(6), 502–509. https://doi.org/10.1080/10298436.2014.943132
   Web of Science ®Google Scholar
• Arabani, M., Tahami, S. A., & Taghipoor, M. (2017). Laboratory investigation of hot mix asphalt containing waste materials. Road Materials and Pavement Design, 18(3), 713–729. https://doi.org/10.1080/14680629.2016.1189349
   Web of Science ®Google Scholar
• Azarhoosh, A. R., Nejad, F. M., & Khodaii, A. (2018). Nanomaterial and fatigue cracking of hot mix asphalt. Road Materials and Pavement Design, 19(2), 353–366. https://doi.org/10.1080/14680629.2016.1261724
   Web of Science ®Google Scholar
• Azzam, M. O. J., & Al-Ghazawi, Z. (2015). Evaluation of incorporating oil shale filler aggregate into hot mix asphalt using superpave mix design. Construction and Building Materials, 101, 359–379. https://doi.org/10.1016/j.conbuildmat.2015.10.071
   Web of Science ®Google Scholar
• Bagampadde, U., Isacsson, U., & Kiggundu, B. M. (2004). Classical and contemporary aspects of stripping in bituminous mixes. Road Materials and Pavement Design, 5(1), 7–43. https://doi.org/10.1080/14680629.2004.9689961
   Google Scholar
• Bostancioğlu, M., & Oruç, Ş. (2016). Effect of activated carbon and furan resin on asphalt mixture performance. Road Materials and Pavement Design, 17(2), 512–525. https://doi.org/10.1080/14680629.2015.1092465
   Web of Science ®Google Scholar
• Brasil. (1994). DNER 078/94 - ME: Cimentos asfálticos de petróleo - Especificação de material. Norma Rodoviária. Departamento Nacional de Estradas de Rodagem. Rio de Janeiro/RJ, Brasil, 1994. [In Portuguese].
   Google Scholar
• Brasil. (1997). DNIT EM 367/97 - EM: Material de enchimento para misturas betuminosas. Norma Rodoviária. Departamento Nacional de Infraestrutura de Transporte. Rio de Janeiro/RJ, Brasil, 1997. [In Portuguese].
   Google Scholar
• Brasil. (2006a). DNIT 031/06-ES: Pavimentos flexíveis – Concreto asfáltico – Especificação de serviço. Norma Rodoviária. Departamento Nacional de Infraestrutura de Transporte. Rio de Janeiro/RJ, Brasil, 2006. [In Portuguese].
   Google Scholar
• Brasil. (2006b). DNIT 095/06 - EM: Cimentos asfálticos de petróleo - Especificação de material. Norma Rodoviária. Departamento Nacional de Infraestrutura de Transporte. Rio de Janeiro/RJ, Brasil, 2006. [In Portuguese].
   Google Scholar
• Buttlar, W. G., Bozkurt, D., Al-Khateeb, G. G., & Waldhoff, A. S. (1999). Understanding asphalt mastic behavior through micromechanics. Transportation Research Record, 1681(1), 157–169. https://doi.org/10.3141/1681-19
   Google Scholar
• Chen, M., Lin, J., & Wu, S. (2011). Potential of recycled fine aggregates powder as filler in asphalt mixture. Construction and Building Materials, 25(10), 3909–3914. https://doi.org/10.1016/j.conbuildmat.2011.04.022
   Web of Science ®Google Scholar
• Chen, M., Zheng, J., Li, F., Wu, S., Lin, J., & Wan, L. (2015). Thermal performances of asphalt mixtures using recycled tyre rubber as mineral filler. Road Materials and Pavement Design, 16(2), 379–391. https://doi.org/10.1080/14680629.2014.1002524
   Web of Science ®Google Scholar
• Cheng, D., Little, D. N., Lytton, R. L., & Holste, J. C. (2002). Surface Energy measurement of asphalt and Its application to predicting fatigue and healing in asphalt mixtures. Transportation Research Record: Journal of the Transportation Research Board, 1810(1), 44–53. https://doi.org/10.3141/1810-06
   Web of Science ®Google Scholar
• Cheng, Y., Tao, J., Jiao, Y., Tan, G., Guo, Q., Wang, S., & Ni, P. (2016). Influence of the properties of filler on high and medium temperature performances of asphalt mastic. Construction and Building Materials, 118, 268–275. https://doi.org/10.1016/j.conbuildmat.2016.05.041
   Web of Science ®Google Scholar
• Clopotel, C., & Bahia, H. (2013). The effect of bitumen polar groups adsorption on mastics properties at low temperatures. Road Materials and Pavement Design, 14(sup1), 38–51. https://doi.org/10.1080/14680629.2013.774745
   Web of Science ®Google Scholar
• Dong, Q., Yuan, J., Chen, X., & Ma, X. (2018). Reduction of moisture susceptibility of cold asphalt mixture with Portland cement and bentonite nanoclay additives. Journal of Cleaner Production, 176, 320–328. https://doi.org/10.1016/j.jclepro.2017.12.163
   Web of Science ®Google Scholar
• Dong, Z., Liu, Z., Wang, P., & Gong, X. (2017). Nanostructure characterization of asphalt-aggregate interface through molecular dynamics simulation and atomic force microscopy. Fuel, 189, 155–163. https://doi.org/10.1016/j.fuel.2016.10.077
   Web of Science ®Google Scholar
• Eymael, M. M. T., de Wijs, W., & Mahadew, D. (1994). The Use of MSWI bottom ash in asphalt concrete. In J. J. J. M. Goumans, H. A. van der Sloot, & T. G. B. T.-S., E. S. Aalbers (Eds.), Environmental aspects of construction with waste materials (Vol. 60, pp. 851–862). Elsevier. https://doi.org/10.1016/S0166-1116(08)71516-4
   Google Scholar
• Faheem, A., Cloutier, C., Bautista, E. G., & Sobolev, K. (2017). Impact of Coal Combustion Product Incorporation in Asphalt Mixture Performance.
   Google Scholar
• Foroutan Mirhosseini, A., Kavussi, A., Jalal Kamali, M. H., Khabiri, M. M., & Hassani, A. (2017). Evaluating fatigue behavior of asphalt binders and mixes containing date seed Ash. Journal of Civil Engineering and Management, 23(8), 1164–1175. https://doi.org/10.3846/13923730.2017.1396560
   Web of Science ®Google Scholar
• Foroutan Mirhosseini, S., Khabiri, M., Kavussi, A., & Jalal Kamali, M. (2016). Applying surface free energy method for evaluation of moisture damage in asphalt mixtures containing date seed ash. Construction and Building Materials, 125, 408–416. https://doi.org/10.1016/j.conbuildmat.2016.08.056
   Web of Science ®Google Scholar
• Haider, S., Hafeez, I., Bilal Ahmed Zaidi, S., Ali Nasir, M., & Rizwan, M. (2020). A pure case study on moisture sensitivity assessment using tests on both loose and compacted asphalt mixture. Construction and Building Materials, 239, 117817. https://doi.org/10.1016/j.conbuildmat.2019.117817
   Web of Science ®Google Scholar
• Hamedi, G. H., & Tahami, S. A. (2018). The effect of using anti-stripping additives on moisture damage of hot mix asphalt. International Journal of Adhesion and Adhesives, 81, 90–97. https://doi.org/10.1016/j.ijadhadh.2017.03.016
   Web of Science ®Google Scholar
• Han, Z., Sha, A., Tong, Z., Liu, Z., Gao, J., Zou, X., & Yuan, D. (2017). Study on the optimum rice husk ash content added in asphalt binder and its modification with bio-oil. Construction and Building Materials, 147, 776–789. https://doi.org/10.1016/j.conbuildmat.2017.05.004
   Web of Science ®Google Scholar
• Hesami, E., Birgisson, B., & Kringos, N. (2014). Numerical and experimental evaluation of the influence of the filler–bitumen interface in mastics. Materials and Structures, 47(8), 1325–1337. https://doi.org/10.1617/s11527-013-0237-8
   Web of Science ®Google Scholar
• Huwae, D. D. M., Parera, L. R., & Tanijaya, J. (2016). Bagasse-ash as filler in HRS (hot rolled sheet) mixture. The 2016 World Congress on Advance in Civil, Environmental and Material Research (ACEM16), Jeju Island, Korea, Agustus 28-September 1.
   Google Scholar
• Imaninasab, R. (2016). Rutting resistance and resilient modulus evaluation of polymer-modified SMA mixtures. Petroleum Science and Technology, 34(16), 1483–1489. https://doi.org/10.1080/10916466.2016.1206567
   Web of Science ®Google Scholar
• Jahanian, H. R., Shafabakhsh, G., & Divandari, H. (2017). Performance evaluation of Hot Mix asphalt (HMA) containing bitumen modified with gilsonite. Construction and Building Materials, 131, 156–164. https://doi.org/10.1016/j.conbuildmat.2016.11.069
   Web of Science ®Google Scholar
• Leng, Z., Zhang, Z., Zhang, Y., Wang, Y., Yu, H., & Ling, T. (2018). Laboratory evaluation of electromagnetic density gauges for hot-mix asphalt mixture density measurement. Construction and Building Materials, 158, 1055–1064. https://doi.org/10.1016/j.conbuildmat.2017.09.186
   Web of Science ®Google Scholar
• Liao, M.-C., Airey, G., & Chen, J.-S. (2013). Mechanical properties of filler-asphalt mastics. International Journal of Pavement Research & Technology, 6(5), 576–581. https://doi.org/10.6135/ijprt.org.tw/2013.6(5).576
   Google Scholar
• Likitlersuang, S., & Chompoorat, T. (2016). Laboratory investigation of the performances of cement and fly ash modified asphalt concrete mixtures. International Journal of Pavement Research and Technology, 9(5), 337–344. https://doi.org/10.1016/j.ijprt.2016.08.002
   Google Scholar
• Lima, M. S. S., & Thives, L. P. (2020). Evaluation of red mud as filler in Brazilian dense graded asphalt mixtures. Construction and Building Materials, 260, 119894. https://doi.org/10.1016/j.conbuildmat.2020.119894
   Web of Science ®Google Scholar
• Lin, C., Jintang, P., Zhongyin, G., & Qian, W. (2017). Evaluation of fatigue cracking in asphalt mixtures based on surface energy. Journal of Materials in Civil Engineering, 29(3), D4015003. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001465
   Web of Science ®Google Scholar
• Little, D. N., & Epps, J. A. (2001). The benefits of hydrated lime in hot mix asphalt. National Lime Association.
   Google Scholar
• Liu, G., Yang, T., Li, J., Jia, Y., Zhao, Y., & Zhang, J. (2018). Effects of aging on rheological properties of asphalt materials and asphalt-filler interaction ability. Construction and Building Materials, 168, 501–511. https://doi.org/10.1016/j.conbuildmat.2018.02.171
   Web of Science ®Google Scholar
• Lucas Júnior, J. L. O., Babadopulos, L. F. A. L., & Soares, J. B. (2019). Aggregate–binder adhesiveness assessment and investigation of the influence of morphological and physico-chemical properties of mineral aggregates. Road Materials and Pavement Design, 20(sup1), S79–S94. https://doi.org/10.1080/14680629.2019.1588773
   Web of Science ®Google Scholar
• Ma, L., Xu, D., Wang, S., & Gu, X. (2020). Expansion inhibition of steel slag in asphalt mixture by a surface water isolation structure. Road Materials and Pavement Design, 21(8), 2215–2229. https://doi.org/10.1080/14680629.2019.1601588
   Web of Science ®Google Scholar
• Martinez, J. G. B. (2014). Avaliação de desempenho de misturas betuminosas com adição de lodos de ETA e de ETE. Universidade de Brasilia - Brasília - DF.
   Google Scholar
• Melo, J. V. S., Trichês, G., & Rosso, L. T. (2018a). Experimental evaluation of the influence of reinforcement with multi-walled carbon nanotubes (MWCNTs) on the properties and fatigue life of hot mix asphalt. Construction and Building Materials, 162, 369–382. https://doi.org/10.1016/j.conbuildmat.2017.12.033
   Web of Science ®Google Scholar
• Melo, M., Neves, G., Menezes, R., Ferreira, H., Nóbrega, A., & Marinho, E. (2018b). Cal produzida a partir de cinza de biomassa rica em cálcio. Cerâmica, 64(371), 318–324. https://doi.org/10.1590/0366-69132018643712338
   Google Scholar
• Mistry, R., & Roy, T. K. (2016). Effect of using fly ash as alternative filler in hot mix asphalt. Perspectives in Science, 8, 307–309. https://doi.org/10.1016/j.pisc.2016.04.061
   Google Scholar
• Modarres, A., & Rahmanzadeh, M. (2014). Application of coal waste powder as filler in hot mix asphalt. Construction and Building Materials, 66, 476–483. https://doi.org/10.1016/j.conbuildmat.2014.06.002
   Web of Science ®Google Scholar
• Moeini, A. R., Badiei, A., & Rashidi, A. M. (2020). Effect of nanosilica morphology on modification of asphalt binder. Road Materials and Pavement Design, 21(8), 2230–2246. https://doi.org/10.1080/14680629.2019.1602072
   Web of Science ®Google Scholar
• Murana, A. A., & Sani, L. (2015). Partial replacement of cement with bagasse ash in hot mix asphalt. Nigerian Journal of Technology, 34(4), 699–704. https://doi.org/10.4314/njt.v34i4.5
   Google Scholar
• Nascimento, J. E. F., Nóbrega, A. C. V, Ferreira, H. C., Neves, G. A., & Santana, L. N. L. (2019). Cerâmica, 65, 85–91. https://doi.org/10.1590/0366-69132019653732385
   Google Scholar
• Nciri, N., Shin, T., Lee, H., & Cho, N. (2018). Potential of waste oyster shells as a novel biofiller for hot-mix asphalt. Applied Sciences., 8(3)(415). https://doi.org/10.3390/app8030415
   Google Scholar
• Nwaobakata, C., & Agwunwamba, J. (2014). Influence of periwinkle shells ash as filler in hot mix asphalt. International Journal of Science and Research, 3(7), 2369–2373.
   Google Scholar
• Omar, H. A., Yusoff, N. I. M., Mubaraki, M., & Ceylan, H. (2020). Effects of moisture damage on asphalt mixtures. Journal of Traffic and Transportation Engineering (English Edition), 7(5), 600–628. https://doi.org/10.1016/j.jtte.2020.07.001
   Google Scholar
• Pasandín, A. R., Pérez, I., Ramírez, A., & Cano, M. M. (2016). Moisture damage resistance of hot-mix asphalt made with paper industry wastes as filler. Journal of Cleaner Production, 112, 853–862. https://doi.org/10.1016/j.jclepro.2015.06.016
   Web of Science ®Google Scholar
• Pirmohammad, S., Majd-Shokorlou, Y., & Amani, B. (2020). Experimental investigation of fracture properties of asphalt mixtures modified with nano Fe2O3 and carbon nanotubes. Road Materials and Pavement Design, 21(8), 2321–2343. https://doi.org/10.1080/14680629.2019.1608289
   Web of Science ®Google Scholar
• Ren, X., & Sancaktar, E. (2019). Use of fly ash as eco-friendly filler in synthetic rubber for tire applications. Journal of Cleaner Production, 206, 374–382. https://doi.org/10.1016/j.jclepro.2018.09.202
   Web of Science ®Google Scholar
• Rongali, U., Singh, G., Chourasiya, A., & Jain, P. K. (2013). Laboratory investigation on Use of Fly Ash plastic waste composite in Bituminous Concrete mixtures. Procedia - Social and Behavioral Sciences, 104, 89–98. https://doi.org/10.1016/j.sbspro.2013.11.101
   Google Scholar
• Sargın, Ş, Saltan, M., Morova, N., Serin, S., & Terzi, S. (2013). Evaluation of rice husk ash as filler in hot mix asphalt concrete. Construction and Building Materials, 48, 390–397. https://doi.org/10.1016/j.conbuildmat.2013.06.029
   Web of Science ®Google Scholar
• Sung Do, H., Hee Mun, P., & Suk keun, R. (2008). A study on engineering characteristics of asphalt concrete using filler with recycled waste lime. Waste Management, 28(1), 191–199. https://doi.org/10.1016/j.wasman.2006.11.011
   PubMed Web of Science ®Google Scholar
• Tahami, S. A., Arabani, M., & Foroutan Mirhosseini, A. (2018). Usage of two biomass ashes as filler in hot mix asphalt. Construction and Building Materials, 170, 547–556. https://doi.org/10.1016/j.conbuildmat.2018.03.102
   Web of Science ®Google Scholar
• Vishal, S., Satish, C., & Rajan, C. (2010). Characterization of Fly Ash bituminous concrete mixes. Journal of Materials in Civil Engineering, 22(12), 1209–1216. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000125
   Web of Science ®Google Scholar
• Wang, H., Liu, X., Zhang, H., Apostolidis, P., Scarpas, T., & Erkens, S. (2020). Asphalt-rubber interaction and performance evaluation of rubberised asphalt binders containing non-foaming warm-mix additives. Road Materials and Pavement Design, 21(6), 1612–1633. https://doi.org/10.1080/14680629.2018.1561380
   Web of Science ®Google Scholar
• Winniford, R. S. (1961). The rheology of asphalt-filler systems as shown by the microviscometer. American Society for Testing and Materials, STP309, 109–120.
   Google Scholar
• Woszuk, A., Bandura, L., & Franus, W. (2019). Fly ash as low cost and environmentally friendly filler and its effect on the properties of mix asphalt. Journal of Cleaner Production, 235, 493–502. https://doi.org/10.1016/j.jclepro.2019.06.353
   Web of Science ®Google Scholar
• Xie, J., Wu, S., Pang, L., Lin, J., & Zhu, Z. (2012). Influence of surface treated fly ash with coupling agent on asphalt mixture moisture damage. Construction and Building Materials, 30, 340–346. https://doi.org/10.1016/j.conbuildmat.2011.11.022
   Web of Science ®Google Scholar
• Xue, Y., Hou, H., Zhu, S., & Zha, J. (2009). Utilization of municipal solid waste incineration ash in stone mastic asphalt mixture: Pavement performance and environmental impact. Construction and Building Materials, 23(2), 989–996. https://doi.org/10.1016/j.conbuildmat.2008.05.009
   Web of Science ®Google Scholar
• Xue, Y., Wu, S., Cai, J., Zhou, M., & Zha, J. (2014). Effects of two biomass ashes on asphalt binder: Dynamic shear rheological characteristic analysis. Construction and Building Materials, 56, 7–15. https://doi.org/10.1016/j.conbuildmat.2014.01.075
   Web of Science ®Google Scholar
• Xue, Y., Yang, J., Liu, Z., Wang, Z., Liu, Z., Li, Y., & Zhang, Y. (2004). Paving asphalt modifier from co-processing of FCC slurry with coal. Catalysis Today, 98(1), 333–338. https://doi.org/10.1016/j.cattod.2004.07.046
   Web of Science ®Google Scholar
• Yilmaz, M., Kök, B. V., & Kuloğlu, N. (2011). Effects of using asphaltite as filler on mechanical properties of hot mix asphalt. Construction and Building Materials, 25(11), 4279–4286. https://doi.org/10.1016/j.conbuildmat.2011.04.072
   Web of Science ®Google Scholar
• Zainudin, M. Z. M., Khairuddin, F. H., Ng, C. P., Che Osmi, S. K., Misnon, N. A., & Murniati, S. (2016). Effect of sugarcane bagasse Ash as filler in hot mix asphalt. Materials Science Forum, 846, 683–689. https://doi.org/10.4028/www.scientific.net/MSF.846.683
   Google Scholar
• Zhang, K., Huchet, F., & Hobbs, A. (2019). A review of thermal processes in the production and their influences on performance of asphalt mixtures with reclaimed asphalt pavement (RAP). Construction and Building Materials, 206, 609–619. https://doi.org/10.1016/j.conbuildmat.2019.02.057
   Web of Science ®Google Scholar
• Zoorob, S. E., & Cabrera, J. G. (1997). Design and Construction of A Road Pavement using Fly-Ash in Hot rolled asphalt. In J. J. J. M. Goumans, G. J. Senden, & H. A. B. T.-S., E. S. van der Sloot (Eds.), Waste Materials in Construction (Vol. 71, pp. 149–165). Elsevier. https://doi.org/10.1016/S0166-1116(97)80199-9
   Google Scholar