Field evaluation and statistical analysis of the dynamic response of semi-rigid pavement under full-scale moving truck load

References

• Ai, C., Rahman, A., Huang, D., Ren, D., & Lu, Y. J. (2018). Dynamic behavior and performance analysis of asphalt pavement in areas with extreme seasonal variation in temperature. Journal of Transportation Engineering, Part B: Pavements, 144(3), 04018035. https://doi.org/10.1061/JPEODX.0000063
   Web of Science ®Google Scholar
• Al-Qadi, I. L., & Wang, H. (2012). Impact of wide-base tires on pavements: Results from instrumentation measurements and modeling analysis. Transpotation Research Record, 2304(1), 169–176. https://doi.org/10.3141/2304-19
   Google Scholar
• Al-Qadi, I. L., & Wang, H. J. (2009). Full-depth pavement responses under various tire configurations: Accelerated pavement testing and finite element modeling. Sciences Engineering Medicine, 78, 721–760.
   Google Scholar
• Assogba, O. C., Sun, Z., Tan, Y., Nonde, L., & Bin, Z. (2020). Finite-element simulation of instrumented asphalt pavement response under moving vehicular load. International Journal of Geomechanics, 20(3), 04020006. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001616
   Web of Science ®Google Scholar
• Assogba, O. C., Tan, Y., Sun, Z., Lushinga, N., & Bin, Z. (2021). Effect of vehicle speed and overload on dynamic response of semi-rigid base asphalt pavement. Road Materials and Pavement Design, 22(3), 572–602. https://doi.org/10.1080/14680629.2019.1614970
   Web of Science ®Google Scholar
• Assogba, O. C., Tan, Y., Zhou, X., Zhang, C., & Anato, J. N. (2020). Numerical investigation of the mechanical response of semi-rigid base asphalt pavement under traffic load and nonlinear temperature gradient effect. Construction and Building Materials, 235, https://doi.org/10.1016/j.conbuildmat.2019.117406
   Google Scholar
• Baker, H., Buth, M., & Van Deusen, D. (1994). Minnesota road research project: Load response instrumentation installation and testing procedures. Final Report.
   Google Scholar
• Bayat, A., Knight, M. J. R. M., & Design, P. (2012). Field evaluation and analysis of flexible pavement structural responses under dynamic loads. Road Materials and Pavement Design, 13(1), 26–37. https://doi.org/10.1080/14680629.2011.637026
   Web of Science ®Google Scholar
• Box, G. E. P., & Meyer, R. D. (1986). An analysis for unreplicated fractional factorials. Technometrics, 28(1), 11–18. https://doi.org/10.1080/00401706.1986.10488093
   Web of Science ®Google Scholar
• Bryman, A., & Cramer, D. (1996). Quantitative data analysis with minitab: A guide for social scientists (1 st ed., pp. 1–302). Routledge.
   Google Scholar
• Chen, X., Zhang, J., & Wang, X. (2015). Full-scale field testing on a highway composite pavement dynamic responses. Transportation Geotechnics, 4, 13–27. https://doi.org/10.1016/j.trgeo.2015.05.002
   Web of Science ®Google Scholar
• Cohen, J. (2013). Statistical power analysis for the behavioral sciences (2nd ed., pp. 1–579). Academic Press.
   Google Scholar
• De Beer, M. (1992). Developments in the failure criteria of the South African mechanistic design procedure for asphalt pavements. International Conference on Asphalt Pavements, Nottingham, United Kingdom.
   Google Scholar
• Dempsey, B., Janssen, D., Thomas, J., Frey, P., Ioannides, A., & Elliot, R. (1984). Development of a preliminary ALRS stabilized material pavement analysis system (SPAS).
   Google Scholar
• Dong, Z., Pan, X., Shao, X., & Zhou, X. (2016). Dynamic response analysis of asphalt pavement due to combined non-uniform moving load and temperature distribution (Vol. 44). https://doi.org/10.11908/j.issn.0253-374x.2016.05.013
   Google Scholar
• et SETRA, L. (1994). Conception et Dimensionnement des Structures de Chaussée: Guide Technique. Laboratoire Central des Ponts et Chaussées et Service d’Études Techniques des Routes et Autoroutes, Ministère de l’Équipement, des Transports et du Tourisme.
   Google Scholar
• Flintsch, G. W., Diefenderfer, B. K., & Nunez, O. (2008). Composite pavement systems: Synthesis of design and construction practices.
   Google Scholar
• Francken, L., & Clauwaert, C. (1987, July 13–17). Characterization and structural assessment of bound materials for flexible road structures. Sixth International Conference, structural design of asphalt pavements, volume I, Proceedings. Ann Arbor, Michigan: University of Michigan.
   Google Scholar
• Ghani, J. A., Choudhury, I., & Hassan, H. (2004). Application of Taguchi method in the optimization of end milling parameters. Journal of Materials Processing Technology, 145(1), 84–92. https://doi.org/10.1016/S0924-0136(03)00865-3
   Web of Science ®Google Scholar
• Hartman, A. M., Gilchrist, M. D., Owende, P. M., Ward, S. M., & Clancy, F. J. R. M. (2001). In-situ accelerated testing of bituminous mixtures. Road Materials and Pavement Design, 2(4), 337–357. https://doi.org/10.1080/14680629.2001.9689907
   Google Scholar
• Hernando, D., & del Val, M. A. (2013). A comprehensive overview on main distress mechanisms in composite pavements. International Journal of Pavement Research and Technology, 6(6), 737–744. https://doi.org/10.6135/ijprt.org.tw/2013.6(6).737
   Google Scholar
• Hernando, D., & Del Val, M. A. (2016). Guidelines for the design of semi-rigid long-life pavements. International Journal of Pavement Research and Technology, 9(2), 121–127. https://doi.org/10.1016/j.ijprt.2016.03.003
   Google Scholar
• Institute, A. (1982). Research and development of the asphalt institute’s thickness design manual (Vol. 82, pp. 1–240). Asphalt Institute.
   Google Scholar
• Islam, M. R., & Tarefder, R. A. (2013). Measuring thermal effect in the structural response of flexible pavement based on field instrumentation. International journal of pavement research and technology, 6(4), 274–279. https://doi.org/10.6135/IJPRT.ORG.TW/2013.6(4).274
   Google Scholar
• JTGD50-. (2006). Specifications for design of highway asphalt pavement.
   Google Scholar
• Khoury, I., Sargand, S., Jordan, B., Cichocki, P., & Sheer, M. (2016). Structural study of perpetual pavement performance in Ohio The roles of accelerated pavement testing in pavement sustainability (pp. 441–459). https://doi.org/10.1007/978-3-319-42797-3_29
   Google Scholar
• Li, W., Shen, A., & Zhang, Y. (2004). Thermally induced stresses in semi-rigid materials for pavement base. 2.
   Google Scholar
• Loulizi, A., Al-Qadi, I. L., & Elseifi, M. J. (2006). Difference between in situ flexible pavement measured and calculated stresses and strains. Journal of Transportation Engineering, 132(7), 574–579. https://doi.org/10.1061/(ASCE)0733-947X(2006)132:7(574)
   Web of Science ®Google Scholar
• Lv, P., & Dong, Z. (2010). Mechanical analysis of vehicle-asphalt pavement system. China Communications Press.
   Google Scholar
• Minitab, I. (2003). Minitab user’s guide 2: Data analysis and quality tools.
   Google Scholar
• Otte, E., Savage, P. F., & Monismith, C. L. (1982). Structural design of cemented pavements layers. Transportation Engineering Journal of ASCE, 108(4), 428–446. https://doi.org/10.1061/TPEJAN.0001000
   Google Scholar
• Pais, J. C., Amorim, S. I., & Minhoto, M. (2013). Impact of traffic overload on road pavement performance. Journal of Transportation Engineering, 139(9), 873–879. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000571
   Web of Science ®Google Scholar
• Park, S. (1996). Robust design and analysis for quality engineering (1st ed., pp. 1–344). Springer US.
   Google Scholar
• Powell, W., Potter, J., Mayhew, H., & Nunn, M. (1984). The structural design of bituminous roads.
   Google Scholar
• Priest, A. L., Timm, D. H., Solaimanian, M., Gibson, N., & Marasteanu, M. (2005). A full-scale pavement structural study for mechanistic-empirical pavement design. Asphalt paving technology: association of asphalt paving technologists-proceedings of the technical sessions.
   Google Scholar
• Raab, C., & Partl, M. N. (2009). Interlayer bonding of binder, base and subbase layers of asphalt pavements: Long-term performance. Construction and Building Materials, 23(8), 2926–2931. https://doi.org/10.1016/j.conbuildmat.2009.02.025
   Web of Science ®Google Scholar
• Rys, D., Judycki, J., & Jaskula, P. (2016). Analysis of effect of overloaded vehicles on fatigue life of flexible pavements based on weigh in motion (WIM) data. International Journal of Pavement Engineering, 17(8), 716–726. https://doi.org/10.1080/10298436.2015.1019493
   Web of Science ®Google Scholar
• Sargand, S. M., Green, R., & Khoury, I. (1997). Instrumenting Ohio test pavement. Transportation Research Record, 1596(1), 23–30. https://doi.org/10.3141/1596-04
   Google Scholar
• Sebaaly, P., & Tabatabaee, N. (1993). Influence of vehicle speed on dynamic loads and pavement response. Transportation Research Record, 1410, 107–114. https://onlinepubs.trb.org/Onlinepubs/trr/1993/1410/1410-014.pdf
   Google Scholar
• Sebaaly, P., Tabatabaee, N., Kulakowski, B., Scullion, T. J. F. H. A., & Washington, D. C. (1991). Instrumentation for flexible pavements-field performance of selected sensors.
   Google Scholar
• Shen, J.-A., Li, F.-P., & Chen, J. (2004). Analysis and preventive techniques of premature damage of asphalt pavement in expressway.
   Google Scholar
• Tautou, R., Picoux, B., & Petit, C. (2017). Temperature influence in a dynamic viscoelastic modeling of a pavement structure. Journal of Transportation Engineering, Part B: Pavements, 143(3), 04017012. https://doi.org/10.1061/JPEODX.0000013
   Web of Science ®Google Scholar
• Wang, H., & Al-Qadi, I. L. (2010). Impact quantification of wide-base tire loading on secondary road flexible pavements. Journal of Transportation Engineering, 137(9), 630–639. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000245
   Web of Science ®Google Scholar
• Wang, X. D., Zhang, L., Zhou, X. Y., Xiao, Q., Guan, W., & Shan, L. Y. (2020). Research progress of RIOHTRACK in China. Accelerated pavement testing to transport infrastructure innovation (pp. 21–31). Springer.
   Google Scholar
• Wang, X. D., Zhang, L., Zhou, X. Y., Xiao, Q., & Wei, G. (2018). Review of researches of RIOHTRACK in 2017. Journal of Highway & Transportation Research & Development, 35(4), 1–13. https://doi.org/10.3969/j.issn.1002-0268.2018.04.001
   Google Scholar
• Wu, S., Chen, H., Zhang, J., & Zhang, Z. (2017). Effects of interlayer bonding conditions between semi-rigid base layer and asphalt layer on mechanical responses of asphalt pavement structure. International Journal of Pavement Research and Technology, 10(3), 274–281. https://doi.org/10.1016/j.ijprt.2017.02.003
   Google Scholar
• Xu-dong, W. (2017). Design of pavement structure and material for full-scale test track. Journal of Highway & Transportation Research & Development, 34(6), 30–37.
   Google Scholar
• Yang, T. (2005). Analysis on the cause of reflection crack of asphalt pavement based on semi-rigid type base and anti-crack method.
   Google Scholar
• Zeng, F., Wang, X., Li, H., Li, L., & Zhang, C. (2016). Design and Construction of long-life semirigid pavement: Investigation from test sections in northern and southern China.
   Google Scholar
• Zhang, J., Wei, L. Y., Shi-Bin, M. A., & Wang, T. (2016). Field test and numerical simulation of dynamic response of semi-rigid base asphalt pavement under moving vehicle load. Journal of Highway and Transportation Research and Development, 33(10), 19–24.
   Google Scholar
• Zhang, L. J. (2013). Dynamic response of asphalt pavement on semi-rigid base due to heavy load. Applied Mechanics and Materials.
   Google Scholar
• Zhao, X., Shen, A., & Ma, B. (2020). Temperature response of asphalt pavement to low temperatures and large temperature differences. International Journal of Pavement Engineering, 21(1), 49–62. https://doi.org/10.1080/10298436.2018.1435883.
   Web of Science ®Google Scholar
• Zheng, J. L. (2013). Design guide for semirigid pavements in China based on critical state of asphalt mixture. Journal of Materials in Civil Engineering, 25(7), 899–906. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000686
   Web of Science ®Google Scholar
• Zukang, Y. J. H. (2003). A review on design criteria of asphalt pavements. 2, 43–49.
   Google Scholar