References
- ABAQUS/Standard User’s Manual, Version 6.14. Providence, RI: Simulia; 2014. (n.d.).
- Bahia, H., Tabatabaee, H., & Velasquez, R. (2012). Asphalt thermal cracking analyser (ATCA). 7th RILEM International Conference on Cracking in Pavements, 147–156.
- Brinson, H. F., & Brinson, L. C. (2008). Polymer engineering science and viscoelasticity: An introduction. Springer.
- Chang, L., & Kaijian, N. (2013). Simulation of asphalt concrete cracking using cohesive zone model. Construction and Building Materials, 38, 1097–1106. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2012.09.063
- Delaporte, B., Di Benedetto, H., Sauzéat, C., & Chaverot, P. (2005). Linear viscoelastic properties of mastics: results from a new annular shearing rheometer, and modelling. Proceedings of the International Conferences on the Bearing Capacity of Roads, Railways and Airfields.
- Di Benedetto, H., Olard, F., Sauzéat, C., & Delaporte, B. (2004). Linear viscoelastic behaviour of bituminous materials: From binders to mixes. Road Materials and Pavement Design, 5(sup1), 163–202. https://doi.org/https://doi.org/10.1080/14680629.2004.9689992
- EN. (2007). BS EN 13108-1 - Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete. European Committee for Standardization CEN: Paris, France.
- EN. (2012). BS EN 12697-46: Bituminous Mixtures—Test Methods for Hot Mix Asphalt—Part: 46: Low Temperature Cracking and Properties by Uniaxial Tension Tests. European Committee for Standardization CEN: Paris, France.
- Fakhari Tehrani, F., Absi, J., Allou, F., & Petit, C. (2013a). Heterogeneous numerical modeling of asphalt concrete through use of a biphasic approach: Porous matrix/inclusions. Computational Materials Science, 69, 186–196. https://doi.org/https://doi.org/10.1016/j.commatsci.2012.11.041
- Fakhari Tehrani, F., Absi, J., Allou, F., & Petit, C. (2013b). Investigation into the impact of the use of 2D/3D digital models on the numerical calculation of the bituminous composites’ complex modulus. Computational Materials Science, 79, 377–389. https://doi.org/https://doi.org/10.1016/j.commatsci.2013.05.054
- Fakhari Tehrani, F., Quignon, J., Allou, F., Absi, J., & Petit, C. (2013). Two-dimensional/three-dimensional biphasic modelling of the dynamic modulus of bituminous materials. European Journal of Environmental and Civil Engineering, 17(6), 430–443. https://doi.org/https://doi.org/10.1080/19648189.2013.786243
- Falchetto, A. C., Moon, K. H., Wang, D., Riccardi, C., & Wistuba, M. P. (2018). Comparison of low-temperature fracture and strength properties of asphalt mixture obtained from IDT and SCB under different testing configurations. Road Materials and Pavement Design, 19(3), 591–604. https://doi.org/https://doi.org/10.1080/14680629.2018.1418722
- Jung, D. H., & Vinson, T. S. (1994). Low temperature cracking resistance of asphalt concrete mixtures (with discussion). Journal of the Association of Asphalt Paving Technologists, 62.
- Jung, D., & Vinson, T. S. (1993). Low temperature cracking resistance of asphalt concrete mixtures (with discussion). Journal of the Association of Asphalt Paving Technologists, 62.
- Keshavarzi, B., & Kim, Y. R. (2020). A dissipated pseudo strain energy-based failure criterion for thermal cracking and its verification using thermal stress restrained specimen tests. Construction and Building Materials, 233, 117199. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.117199
- Keshavarzi, B., Mocelin, D., & Kim Youngsoo, R. (2021). Predicting thermal stress restrained specimen test fracture temperatures using the dissipated pseudo strain energy criterion. Journal of Transportation Engineering, Part B: Pavements, 147(1), 4020088. https://doi.org/https://doi.org/10.1061/JPEODX.0000236
- Li, X.-J., & Marasteanu, M. O. (2010). Using semi circular bending test to evaluate Low temperature fracture resistance for asphalt concrete. Experimental Mechanics, 50(7), 867–876. https://doi.org/https://doi.org/10.1007/s11340-009-9303-0
- Li, X., Braham, A. F., Marasteanu, M. O., Buttlar, W. G., & Williams, R. C. (2008). Effect of factors affecting fracture energy of asphalt concrete at Low temperature. Road Materials and Pavement Design, 9(sup1), 397–416. https://doi.org/https://doi.org/10.1080/14680629.2008.9690176
- Mandal, T., & Bahia, H. (2017). Measuring crack propagation resistance of asphalt mixtures using notched samples in the TSRST. Proceedings of the Sixth-Second Annual Conference of the Canadian Technical Asphalt Association (CTAA): Halifax, Nova Scotia.
- Monismith, C. L., Secor, G. A., & Secor, K. E. (1965). Temperature induced stresses and deformations in asphalt concrete. Association of Asphalt Paving Technologists Proceedings, 34.
- Olard, F., & Di Benedetto, H. (2003). General “2S2P1D” model and relation between the linear viscoelastic behaviours of bituminous binders and mixes. Road Materials and Pavement Design, 4(2), 185–224. https://doi.org/https://doi.org/10.1080/14680629.2003.9689946
- Pszczoła, M., Judycki, J., & Ryś, D. (2016). Evaluation of pavement temperatures in Poland during winter conditions. Transportation Research Procedia, 14, 738–747. https://doi.org/https://doi.org/10.1016/j.trpro.2016.05.342
- Qadir, A., & Guler, M. (2012). Finite element modelling of thermal stress restrained specimens. 5th Eurasphalt & Eurobitume Congress.
- Riahi, E., Allou, F., Botella, R., Dubois, F., Absi, J., & Petit, C. (2017). Quantification of self-heating and its effects under cyclic tests on a bituminous binder. International Journal of Fatigue, 104, 334–341. https://doi.org/https://doi.org/10.1016/j.ijfatigue.2017.07.016
- Rys, D., Jaczewski, M., Pszczola, M., Jaskula, P., & Bankowski, W. (2020). Effect of bitumen characteristics obtained according to EN and Superpave specifications on asphalt mixture performance in low-temperature laboratory tests. Construction and Building Materials, 231, 117156. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2019.117156
- Stock, A. F., & Arand, W. (1993). Low temperature cracking in polymer modified binders. Journal of the Association of Asphalt Paving Technologists, 62.
- Wagnoner, M. P., Buttlar, W. G., & Paulino, G. H. (2005). Disk-shaped compact tension test for asphalt concrete fracture. Experimental Mechanics, 45(3), 270–277. https://doi.org/https://doi.org/10.1007/BF02427951
- Zhu, Y., Dave, E. V., Rahbar-Rastegar, R., Daniel, J. S., & Zofka, A. (2017). Comprehensive evaluation of low-temperature fracture indices for asphalt mixtures. Road Materials and Pavement Design, 18(sup4), 467–490. https://doi.org/https://doi.org/10.1080/14680629.2017.1389085
- Ziari, M. A., Hajikarimi, P., Kheirati Kazerooni, A., Moghadas Nejad, F., & Fini, E. H. (2021). Effect of polyphosphoric acid on fracture properties of asphalt binder and asphalt mixtures. Construction and Building Materials, 310, 125240. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2021.125240