References
- AASHTO. (1993). AASHTO guide for design of pavement structures. American Association of State Highway and Transportation Officials (AASHTO).
- Abbas, A., Fathifazl, G., Isgor, O. B., Razaqpur, A. G., Fournier, B., & Foo, S. (2007). Proposed method for determining the residual mortar content of recycled concrete aggregates. Journal of ASTM International, 5(1), 1–12.
- Abu-Farsakh, M., Dhakal, S., & Chen, Q. (2015). Laboratory characterization of cementitiously treated/stabilized very weak subgrade soil under cyclic loading. Soils and Foundations, 55(3), 504–516. https://doi.org/10.1016/j.sandf.2015.04.003
- ACPA. (2009). Recycling concrete pavements. Engineering bulletin (EB) 043P. American Concrete Pavement Association.
- Andersland, O. B., & Ladanyi, B. (2004). Frozen ground engineering. John Wiley & Sons.
- Andrei, D., Witczak, M. W., Schwartz, C. W., & Uzan, J. (2004). Harmonized resilient modulus test method for unbound pavement materials. Transportation Research Record: Journal of the Transportation Research Board, 1874(1), 29–37. https://doi.org/10.3141/1874-04
- Arm, M. (2001). Self-cementing properties of crushed demolished concrete in unbound layers: Results from triaxial tests and field tests. Waste Management, 21(3), 235–239. https://doi.org/10.1016/S0956-053X(00)00095-7
- Behiry, A. E. A. E. M. (2013). Utilization of cement treated recycled concrete aggregates as base or subbase layer in Egypt. Ain Shams Engineering Journal, 4(4), 661–673. https://doi.org/10.1016/j.asej.2013.02.005
- Bennert, T., Papp Jr, W. J., Maher, A., & Gucunski, N. (2000). Utilization of construction and demolition debris under traffic-type loading in base and subbase applications. Transportation Research Record: Journal of the Transportation Research Board, 1714(1), 33–39. https://doi.org/10.3141/1714-05
- Cetin, B., Coban, H. S., Edil, T. B., Ceylan, H., Likos, W., Zheng, J., & Buss, A. (2021). Determining pavement design criteria for recycled aggregate base and large stone subbase (No. NRRA202103). National Road Research Alliance (NRRA), Minnesota Department of Transportation.
- Ceylan, H., Kim, S., Kaya, O., & Gopalakrishnan, K. (2015). Investigation of AASHTOWare Pavement ME design/DARWin-ME performance prediction models for Iowa pavement analysis and design (No. InTrans Project 14-496). Iowa Department of Transportation, Ames, IA.
- Cosentino, P. J., & Kalajian, E. H. (2001). Developing specifications for using recycled asphalt pavement as base, subbase, or general fill materials (final report). state materials office. Florida Department of Transportation.
- Cunningham, C. N., Evans, T. M., & Tayebali, A. A. (2013). Gradation effects on the mechanical response of crushed stone aggregate. International Journal of Pavement Engineering, 14(3), 231–241. https://doi.org/10.1080/10298436.2012.690518
- Ebrahimi, A., Kootstra, B. R., Edil, T. B., & Benson, C. H. (2012). Practical approach for designing flexible pavements using recycled roadway materials as base course. Road Materials and Pavement Design, 13(4), 731–748. https://doi.org/10.1080/14680629.2012.695234
- Edil, T. B., Cetin, B., & Soleimanbeigi, A. (2017). Laboratory and field performance of recycled aggregate base in a seasonally cold region. Sciences in Cold and Arid Regions, 9(3), 183–191.
- Edil, T. B., Tinjum, J. M., & Benson, C. H. (2012). Recycled unbound materials (No. MN/RC 2012-35). Minnesota Department of Transportation.
- Hasan, M. M., Rahman, A. A., & Tarefder, R. A. (2020). Investigation of accuracy of pavement mechanistic empirical prediction performance by incorporating level 1 inputs. Journal of Traffic and Transportation Engineering (English Edition), 7(2), 259–268. https://doi.org/10.1016/j.jtte.2018.06.006
- Kaya, O. (2015). Investigation of AASHTOWare Pavement ME design/darwin-ME performance prediction models for Iowa pavement analysis and design [Doctoral dissertation]. Iowa State University, Ames, IA.
- Kuo, S. S., Mahgoub, H. S., & Nazef, A. (2002). Investigation of recycled concrete made with limestone aggregate for a base course in flexible pavement. Transportation Research Record: Journal of the Transportation Research Board, 1787(1), 99–108. https://doi.org/10.3141/1787-11
- Lee, J. C., Edil, T. B., Tinjum, J. M., & Benson, C. H. (2010). Quantitative assessment of environmental and economic benefits of recycled materials in highway construction. Transportation Research Record: Journal of the Transportation Research Board, 2158(1), 138–142. https://doi.org/10.3141/2158-17
- Lekarp, F., Isacsson, U., & Dawson, A. (2000). State of the Art. II: Permanent strain response of unbound aggregates. Journal of Transportation Engineering, 126(1), 76–83. https://doi.org/10.1061/(ASCE)0733-947X(2000)126:1(76)
- Li, C., Vennapusa, P. K., Ashlock, J., & White, D. J. (2017). Mechanistic-based comparisons for freeze-thaw performance of stabilized unpaved roads. Cold Regions Science and Technology, 141, 97–108. https://doi.org/10.1016/j.coldregions.2017.06.004
- Little, D. N., & Nair, S. (2009). Recommended practice for stabilization of subgrade soils and base materials. NCHRP Web-Only Document 144. Transportation Research Board of the National Academies.
- Mohod, M. V., & Kadam, K. N. (2016). A comparative study on rigid and flexible pavement: A review. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 13(3), 84–88.
- Nazarian, S., Fathi, A., Tirado, C., Kreinovich, V., Rocha, S., & Mazari, M. (2020). Evaluating mechanical properties of earth material during intelligent compaction. Pre-publication draft of NCHRP Research report 933. Transportation Research Board.
- Nokkaew, K., Tinjum, J. M., Likos, W. J., & Edil, T. B. (2014). Effect of matric suction on resilient modulus for compacted recycled base course in postcompaction state. Transportation Research Record: Journal of the Transportation Research Board, 2433(1), 68–78. https://doi.org/10.3141/2433-08
- Osinubi, K. J. (1998). Influence of compactive efforts and compaction delays on lime-treated soil. Journal of Transportation Engineering, 124(2), 149–155. https://doi.org/10.1061/(ASCE)0733-947X(1998)124:2(149)
- Osinubi, K. J., & Nwaiwu, C. M. (2006). Compaction delay effects on properties of lime-treated soil. Journal of Materials in Civil Engineering, 18(2), 250–258. https://doi.org/10.1061/(ASCE)0899-1561(2006)18:2(250)
- Poon, C. S., Qiao, X. C., & Chan, D. (2006). The cause and influence of self-cementing properties of fine recycled concrete aggregates on the properties of unbound sub-base. Waste Management, 26(10), 1166–1172. https://doi.org/10.1016/j.wasman.2005.12.013
- Rahardjo, H., Vilayvong, K., & Leong, E. C. (2011). Water characteristic curves of recycled materials. Geotechnical Testing Journal, 34(1), 89–96.
- Rosa, M. G., Cetin, B., Edil, T. B., & Benson, C. H. (2016). Development of a test procedure for freeze-thaw durability of geomaterials stabilized with fly ash. Geotechnical Testing Journal, 39(6), 938–953.
- Rosa, M. G., Cetin, B., Edil, T. B., & Benson, C. H. (2017). Freeze–thaw performance of fly ash–stabilized materials and recycled pavement materials. Journal of Materials in Civil Engineering, 29(6), 04017015. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001844
- Saeed, A., Hall Jr, J. W., & Barker, W. (2001). Performance-related tests of aggregates for use in unbound pavement layers. NCHRP Report 453. Transportation Research Board - National Research Council.
- Schwartz, C. W., Li, R., Kim, S., Ceylan, H., & Gopalakrishnan, K. (2011). Sensitivity evaluation of MEPDG performance prediction (final report). NCHRP Project 1-47, Transportation Research Board of the National Academies, Washington, D.C.
- Skok, E. L., Jonhson, E. N., & Brown, M. (2003). Special practices for design and construction of subgrades in poor, wet, and/or saturated soil conditions (No. MN/RC 2003-36). Minnesota Department of Transportation Research Services Section.
- Sweere, G. T. H. (1990). Unbound granular bases for roads [Doctoral dissertation]. Delft University of Technology, Delft, the Netherlands.
- Titi, H. H., Tabatabai, H., Ramirez, J., & Sooman, M. (2019). Evaluation of recycled base aggregates (No. WHRP 0092-17-01). Wisconsin Department of Transportation, Madison, WI.
- Tutumluer, E., & Pan, T. (2008). Aggregate morphology affecting strength and permanent deformation behavior of unbound aggregate materials. Journal of Materials in Civil Engineering, 20(9), 617–627. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:9(617)
- Vennapusa, P. K., & White, D. J. (2009). Comparison of light weight deflectometer measurements for pavement foundation materials. Geotechnical Testing Journal, 32(3), 1–13.
- Vennapusa, P. K. R., White, D. J., Siekmeier, J., & Embacher, R. A. (2012). In situmechanistic characterisations of granular pavement foundation layers. International Journal of Pavement Engineering, 13(1), 52–67. https://doi.org/10.1080/10298436.2011.564281
- Westover, T. M., Labuz, J. F., & Guzina, B. B. (2007). Resilient modulus development of aggregate base and subbase containing recycled bituminous and concrete for 2002 design guide and Mn/pave pavement design (No. MN/RC-2007-25). Minnesota Department of Transportation.
- Witczak, M. W. (2003). Harmonized test methods for laboratory determination of resilient modulus for flexible pavement design. NCHRP 1-28A. National Cooperative Highway Research Program, Transportation Research Board, National Research Council.
- Worel, B., Chadbourn, B., & Strommen, R. (2004). Mnroad automated laser profile system (ALPS). In the 2nd International conference of accelerated pavement testing, Minneapolis, MN.
- Yohannes, B., Hill, K., & Khazanovich, L. (2009). Mechanistic modeling of unbound granular materials (No. MN/RC 2009-21). Minnesota Department of Transportation.