Assessment of a film-cooling flow structure by large-eddy simulation

References

• Han , J.C. , Dutta , S. and Ekkad , S.V. 2000 . Gas Turbine Heat Transfer and Cooling Technology , New York : Taylor & Francis .
   Google Scholar
• Margason , R.J. November 1993 . “ Fifty years of jet in cross flow research ” . In Computational and Experimental Assessment of Jets in Cross Flow, AGARD report CP-534 November ,
   Google Scholar
• Bogard , D.G. and Thole , K.A. 2006 . Gas turbine film cooling . J. Propul. Power , 22 ( 2 ) : 249 – 270 .
   Web of Science ®Google Scholar
• Goldstein , R.J. 1971 . Film cooling . Advances in Heat Transfer. , 7 : 321 – 379 .
   Google Scholar
• Pedersen , D.R. , Eckert , E.R.G. and Goldstein , R.J. 1977 . Film cooling with large density differences between the mainstream and the secondary fluid measured by the heat-mass transfer analogy . J. Heat Transfer. , 99 : 620 – 627 .
   Web of Science ®Google Scholar
• Pietrzyk , J.R. , Bogard , D.G. and Crawford , M.E. 1989 . Hydrodynamic measurements of jets in crossflow for gas turbine film cooling applications . J. Turbomach. , 111 : 139 – 145 .
   Google Scholar
• Pietrzyk , J.R. , Bogard , D.G. and Crawford , M.E. 1990 . Effects of density ratio on the hydrodynamics of film cooling . J. Turbomach. , 112 : 437 – 443 .
   Web of Science ®Google Scholar
• Sinha , A.K. , Bogard , D.G. and Crawford , M.E. 1991 . Film-cooling effectiveness downstream of a single row of holes with variable density ratio . J. Turbomach. , 113 : 442 – 449 .
   Web of Science ®Google Scholar
• Saumweber , C. , Schulz , A. and Wittig , S. 2002 . Correlation of film-cooling effectiveness from thermographic measurements at engine-like conditions . J. Turbomach. , 124 : 686 – 698 .
   Web of Science ®Google Scholar
• Thole , K.A. , Sinha , A. , Bogard , D.G. and Crawford , M.E. 1992 . “ chapter “Mean Temperature Measurements of Jets with a Crossflow for Gas Turbine Film Cooling Application” . In Rotating Machinery Transport Phenomena , 69 – 85 . New York : Hemisphere .
   Google Scholar
• Foster , N.W. and Lampard , D. 1980 . The flow and film cooling effectiveness following injection through a row of holes . J. Eng. Power. , 102 : 584 – 588 .
   Web of Science ®Google Scholar
• Sen , B. , Schmidt , D.L. and Bogard , D.G. 1996 . Film cooling with compound angle holes: Heat transfer . J. Turbomach. , 118 : 800 – 806 .
   Web of Science ®Google Scholar
• Schmidt , D.L. , Sen , B. and Bogard , D.G. 1996 . Film cooling with compound angle holes: Adiabatic effectiveness . J. Turbomach. , 118 : 807 – 813 .
   Web of Science ®Google Scholar
• Ramsey , J.W. and Goldstein , R.J. 1971 . Interaction of a heated jet with a deflecting stream . J. Heat Transfer. , 94 : 365 – 372 .
   Google Scholar
• Goldstein , R.J. and Stone , L.D. 1997 . Row-of-hole film cooling of curved walls at low injection angles . J. Turbomach. , 119 ( 3 ) : 574 – 579 .
   Google Scholar
• Baldauf , S. , Schulz , A. and Wittig , S. 2001 . High-resolution measurements of local effectiveness from discrete hole film cooling . J. Turbomach. , 123 : 758 – 765 .
   Web of Science ®Google Scholar
• Yuen , C.H.N. and Martinez-Botas , R.F. 2003 . Film cooling characteristics of a single round hole at various streamwise angles in a crossflow: Part I effectiveness . Int. J. Heat Mass Transfer. , 46 : 221 – 235 .
   Web of Science ®Google Scholar
• Yuen , C.H.N. and Martinez-Botas , R.F. 2003 . Film cooling characteristics of a single round hole at various streamwise angles in a crossflow: Part II heat transfer coefficients . Int. J. Heat Mass Transfer. , 46 : 237 – 249 .
   Web of Science ®Google Scholar
• Han , J.C. and Mehendale , A.B. 1986 . Flat-plate film cooling with steam injection through one row and two rows of inclined holes . J. Turbomach. , 108 : 137 – 144 .
   Web of Science ®Google Scholar
• Mayle , R.E. and Camarata , F.J. 1975 . Multihole cooling film effectiveness and heat transfer . J. Heat Transfer. , 97 : 534 – 538 .
   Web of Science ®Google Scholar
• Cho , H.H. and Goldstein , R.J. 1995 . Heat (mass) transfer and film cooling effectiveness with injection through discrete holes: Part II –on the exposed surface . J. Turbomach. , 117 : 451 – 460 .
   Web of Science ®Google Scholar
• Ito , S. , Goldstein , R.J. and Eckert , E.R.G. 1978 . Film cooling of a gas turbine blade . J. Eng. Power. , 100 : 476 – 481 .
   Web of Science ®Google Scholar
• Schwarz , S. , Goldstein , R. and Eckert , E. 1990 . The influence of curvature on film cooling performance . J. Turbomach. , 112 : 472 – 478 .
   Google Scholar
• McGovern , K.T. and Leylek , J.H. 2000 . A detailed analysis of film cooling physics: Part II—compound-angle injection with cylindrical holes . J. Turbomach. , 122 : 113 – 121 .
   Web of Science ®Google Scholar
• Brittingham , R.A. and Leylek , J.H. 2000 . A detailed analysis of film cooling physics: Part IV—compound-angle injection with shaped holes . J. Turbomach. , 122 : 133 – 145 .
   Web of Science ®Google Scholar
• Gartshore , I. , Salcudean , M. and Hassan , I. 2001 . Film cooling injection hole geometry: Hole shape comparison for compound cooling orientation . 39 ( 8 ) : 1493 – 1499 .
   Google Scholar
• Hyams , D.G. and Leylek , J.H. 2000 . A detailed analysis of film cooling physics: Part III—streamwise injection with shaped holes . J. Turbomach. , 122 : 122 – 132 .
   Web of Science ®Google Scholar
• Saumweber , C. , Schulz , A. and Wittig , S. 2003 . Free-stream turbulence effects on film cooling with shaped holes . J. Turbomach. , 125 : 57 – 64 .
   Web of Science ®Google Scholar
• Dorney , D.J. and Davis , R.L. 1993 . Numerical simulation of turbine “hot spot” alleviation using film cooling . J. Propul. Power. , 9 ( 3 ) : 329 – 336 .
   Google Scholar
• Leylek , J.H. and Zerkle , R.D. 1994 . Discrete-jet film cooling: A comparison of computational results with experiments . J. Turbomach. , 116 : 358 – 368 .
   Web of Science ®Google Scholar
• Walters , D.K. and Leylek , J.H. 1997 . A systematic computational methodology applied to a three-dimensional film-cooling flowfield . J. Turbomach. , 119 : 777 – 785 .
   Web of Science ®Google Scholar
• Walters , D.K. and Leylek , J.H. 2000 . A detailed analysis of film cooling physics: Part I—streamwise injection with cylindrical holes . J. Turbomach. , 122 : 102 – 112 .
   Web of Science ®Google Scholar
• Peterson , S.D. and Plesniak , M.W. 2004 . Evolution of jets emanating from short holes into crossflow . J. Fluid Mech. , 503 : 57 – 91 .
   Web of Science ®Google Scholar
• Burd , S. and Simon , T. 1997 . “ The influence of coolant supply geometry on film coolant exit flow and surface adiabatic effectiveness ” . In Proc. 1997 International Gas Turbine Conference Orlando FL, , USA ASME Paper 97-GT-25.
   Google Scholar
• Burd , S. and Simon , T. 1999 . Measurements of discharge coefficients in film cooling . J. Turbomach. , 121 ( 3 ) : 243 – 248 .
   Google Scholar
• Lutum , E. and Johnson , B. 1999 . Influence of the hole length-to-diameter ratio on film cooling with cylindrical holes . J. Turbomach. , 121 ( 2 ) : 209 – 216 .
   Google Scholar
• Goldstein , R.J. , Eckert , E.R.G. , Eriksen , V.L. and Ramsey , J.W. 1970 . Film cooling following injection through inclined circular tubes . Israel Journal of Technology , 8 ( 1–2 ) : 145 – 154 .
   Google Scholar
• Goldstein , R.J. , Eckert , E.R.G. and Burggraf , F. 1974 . Effects of hole geometry and density on three-dimensional film cooling . Int. J. Heat Mass Transfer. , 17 : 595 – 607 .
   Web of Science ®Google Scholar
• Eriksen , V.L. and Goldstein , R.J. 1970 . Heat transfer and film cooling injection through inclined circular tubes . J. Heat Transfer. , 96 : 239 – 245 .
   Google Scholar
• Bergeles , G. , Gosman , A.D. and Launder , B.E. 1977 . The near-field character of a jet discharged through a wall at 30° to a mainstream . 14 : 499 – 504 .
   Google Scholar
• Goldstein , R.J. and Yoshida , T. 1982 . The influence of a laminar boundary layer and laminar injection on film cooling performance . J. Heat Transfer. , 104 : 355 – 362 .
   Web of Science ®Google Scholar
• Ammari , H.D. , Hay , N. and Lampard , D. 1990 . The effect of density ratio on the heat transfer coefficient from a film-cooling flat plate . J. Turbomach. , 112 : 444 – 450 .
   Web of Science ®Google Scholar
• Lavrich , P.L. and Chiappetta , L.M. 1990 . “ An investigation of jet in a cross flow for turbine film cooling applications. Technical Report Report No. 90-04 ” . United Technologies Research Center (UTRC) .
   Google Scholar
• Lee , S.W. , Lee , J.S. and Ro , S.T. 1994 . Experimental study on the flow characteristics of streamwise inclined jets in crossflow on flat plate . J. Turbomach. , 116 : 97 – 105 .
   Web of Science ®Google Scholar
• Lee , J.S. , Jung , H.G. and Kang , S.B. 2002 . Effect of embedded vortices on film cooling performance on a flat plate . Exp. Therm. and Fluid Sci. , 26 : 197 – 204 .
   Web of Science ®Google Scholar
• Kohli , A. and Bogard , D.G. 2005 . Turbulent transport in film cooling flows . J. Heat Transfer. , 127 : 513 – 520 .
   Web of Science ®Google Scholar
• Heidmann , J.D. and Hunter , S.D. June 4–7 2001 . “ Coarse grid modeling of turbine film cooling flows using volumetric source terms ” . In 2001 ASME Turbo Expo June 4–7 , New orleans, USA, 2001. ASME Paper 2001-GT-138.
   Google Scholar
• Azzi , A. and Lakehal , D. 2002 . Perspectives in modeling film cooling of turbine blades by transcending conventional two-equation turbulence models . J. Turbomach. , 124 : 472 – 484 .
   Web of Science ®Google Scholar
• Azzi , A. and Jubran , B.A. 2003 . Numerical modeling of film cooling from short length stream-wise injection holes . J. Heat Mass Transfer. , 39 : 345 – 353 .
   Google Scholar
• Kapadia , S. , Roy , S. and Heidmann , J. 2004 . First hybrid turbulence modeling for turbine blade film cooling . J. Thermophys. Heat Transfer. , 18 ( 1 ) : 154 – 156 .
   Google Scholar
• Tyagi , M. and Acharya , S. 2003 . Large eddy simulation of film cooling flow from an inclined cylindrical jet . J. Turbomach. , 125 : 734 – 742 .
   Web of Science ®Google Scholar
• Iourokina , I. and Lele , S.K. 2006 . “ Large eddy simulation of film-cooling flows above the flat surface with a large plenum and short exit holes ” . In 44th Aerospace Sciences Meetings and Exhibit, Reno, NV, USA, January 9–12, 2007 AIAA Paper 2006-1102.
   Google Scholar
• Ziefle , J. , Stolz , S. and Kleiser , L. June 6–9 2005 . “ Large-eddy simulation of separated flow in a channel with streamwise-periodic constrictions ” . In 17th AIAA Computational Fluid Dynamics Conference June 6–9 , Toronto, , Canada AIAA Paper 2005-5353.
   Google Scholar
• Ziefle , J. and Kleiser , L. June 5–8 2006 . “ Large-eddy simulation of a round jet in crossflow ” . In 36th AIAA Fluid Dynamics Conference June 5–8 , San Francisco, , USA AIAA Paper 2006-3370.
   Google Scholar
• Ziefle , J. and Kleiser , L. 2007 . “ Compressibility effects on turbulent separated flow in a streamwise-periodic hill channel—part 1 ” . In IUTAM Symposium on Unsteady Separated Flows and Their Control, Corfu, Greece, June 18–22 2007 Springer
   Google Scholar
• Ziefle , J. and Kleiser , L. “ Compressibility effects on turbulent separated flow in a streamwise-periodic hill channel—part 2 ” . In Notes on Numerical Fluid Mechanics and Multidisciplinary Design Second DESider Symposium on Hybrid RANS-LES Methods, Corfu, Greece, June 17–18 2007, Springer, 2007.
   Google Scholar
• Vos , J.B. , van Kemenade , V. , Ytterström , A. and Rizzi , A.W. 1997 . “ Parallel NSMB: An industrialized aerospace code for complete aircraft simulations ” . In Proc. Parallel CFD Conference 1996 Edited by: Schiano , P . North Holland
   Google Scholar
• Vos , J.B. , Rizzi , A. , Corjon , A. , Chaput , E. and Soinne , E. “ Recent advances in aerodynamics inside the NSMB (Navier Stokes multi block) consortium ” . AIAA Paper 98-0225, 1998.
   Google Scholar
• Vos , J.B. , Leyland , P. , van Kemenade , V. , Gacherieu , C. , Duquesne , N. , Lotstedt , P. , Weber , C. , Ytterström , A. and Saint , C. 2000 . “ Requier ” . In NSMB Handbook 4.5
   Google Scholar
• Gacherieu , C. , Collercandy , R. , Larrieu , P. , Soumillon , P. , Tourette , L. and Viala , S. 2000 . “ Navier-Stokes calculations at Aerospace Matra Airbus for aircraft design ” . In Proc. ICAS, Harrogate, UK , Edited by: Grant , I . London, , UK : Royal Aeronautical Society .
   Google Scholar
• Viala , S. , Amant , S. and Tourette , L. 2002 . “ Recent achievements on Navier-Stokes methods for engine integration ” . In Proc. CEAS, Cambridge , London, , UK : Royal Aeronautical Society .
   Google Scholar
• Mossi , M. 1999 . “ Simulation of benchmark and industrial unsteady compressible turbulent fluid flows ” . In Ph.D. thesis no. 1958 , EPF Lausanne .
   Google Scholar
• Blaisdell , G.A. , Spyropoulos , E.T. and Qin , J.H. 1996 . The effect of the formulation of nonlinear terms on aliasing errors in spectral methods . Appl. Num. Math. , 21 : 207 – 219 .
   Web of Science ®Google Scholar
• Kravchenko , A.G. and Moin , P. 1997 . On the effect of numerical errors in large eddy simulations of turbulent flows . J. Comput. Phys. , 131 ( 2 ) : 310 – 322 .
   Google Scholar
• Stolz , S. and Adams , N.A. 1999 . An approximate deconvolution procedure for large-eddy simulation . Phys. Fluids. , 11 ( 7 ) : 1699 – 1701 .
   Web of Science ®Google Scholar
• Stolz , S. , Adams , N.A. and Kleiser , L. 2001 . The approximate deconvolution model for large-eddy simulations of compressible flows and its application to shock-turbulent-boundary-layer interaction . Phys. Fluids. , 13 ( 10 ) : 2985 – 3001 .
   Web of Science ®Google Scholar
• Coleman , G.N. , Kim , J. and Moser , R.D. 1995 . A numerical study of turbulent supersonic isothermal-wall channel flow . J. Fluid Mech. , 305 : 159 – 183 .
   Web of Science ®Google Scholar
• Struijs , R. , Rudgyard , M. , Nicoud , F. and Hernandez , G. “ A set of characteristic boundary conditions for the cell-vertex AVBP code ” . Technical Report TR/CFD/96/09, CERFACS, Toulouse, France, 1996.
   Google Scholar
• Ziefle , J. and Kleiser , L. 2007 . “ Large-eddy simulation of a film-cooling flow: Treatment of inlet boundary conditions for the isobaric plenum ” . In Proc. Appl. Math. Mech.
   Google Scholar
• Lundbladh , A. , Berlin , S. , Skote , M. , Hildings , C. , Choi , J. , Kim , J. and Henningson , D. 1999 . “ An efficient spectral method for simulation of incompressible flow over a flat plate. Technical report TRITA-MEK 1999:11 ” . Sweden : KTH Stockholm .
   Google Scholar
• Lund , T. , Wu , X. and Squires , D. 1998 . Generation of turbulent inflow data for spatially-developing boundary layer simulations . J. Comput. Phys. , 140 : 233 – 258 .
   Web of Science ®Google Scholar
• Stolz , S. and Adams , N.A. 2003 . LES of high-reynolds-number supersonic boundary layers using the approximate deconvolution model and a rescaling and recycling technique . Phys. Fluids. , 15 ( 8 ) : 2389 – 2412 .
   Google Scholar
• Jarrin , N. , Benhamadouche , S. , Laurence , D. and Prosser , R. 2006 . A synthetic-eddy-method for generating inflow conditions for large-eddy simulations . Int. J. Heat Fluid Flow. , 27 : 585 – 593 .
   Web of Science ®Google Scholar
• Klein , M. , Sadiki , A. and Janicka , J. 2003 . A digital filter based generation of inflow data for spatially developing direct numerical or large eddy simulations . J. Comput. Phys. , 186 : 652 – 665 .
   Web of Science ®Google Scholar
• Jeong , J. and Hussain , F. 1995 . On the identification of a vortex . J. Fluid Mech. , 285 : 69 – 94 .
   Web of Science ®Google Scholar
• Yuan , L.L. 1997 . “ Large Eddy Simulations of a Jet in Crossflow ” . In Ph.D. thesis , Stanford University .
   Google Scholar
• Chabral , B. and Leedom , L.C. 1993 . “ Imaging vector fields using line integral convolution ” . In Proceedings of SIGGRAPH'93, New York 263 – 270 .
   Google Scholar